IceMaster G20 - Glycol Chiller - Digital Fermentation Control - (with two integrated pumps for dual temperature) IceMaster G20 is an efficient glycol chiller with excellent cooling capacity. It's compact, quiet, and ideally suited for home environments. The chiller is powerful enough to cool well-insulated fermentation vessels up to 300 liters or multiple smaller fermenters. It has 500 watts of cooling power, making it suitable for rapid cooling even in hot air temperatures in your garage or brewery. NEW! Duotight push-in sight glass! For best results from the device, we recommend using propylene glycol (ideally at about 30% concentration). Technical specifications: Refrigerant: r600a isobutane, Cooling capacity: 500 watts (0.67 hp) (rated at 22°C), Power consumption: 155 W, Tank: 16.42 L, Maximum lift height (per pump): 5 meters, Maximum flow rate (per pump): 600 L/h, Output tube size: fits 10mm internal diameter tubing, Dimensions: 510mm × 300mm × 460mm (L × W × H). Integrated pumps: Unlike other units, this device has 2 integrated pumps and temperature controllers. This allows you to independently cool two fermenters simultaneously at different temperatures. Set the main reservoir temperature to -4°C (after adding 30% glycol), then set the other two temperatures on the G20's other side to your ideal fermentation temperatures. No additional wiring needed. The pumps are included and pre-wired, ready to use. Wort cooling: Cooling wort from 100°C to 50°C is usually quite simple with tap water. However, cooling from 50°C to 18°C can take a long time. This is because your tap water can be up to 35°C, meaning it would be impossible regardless of the amount of water used to cool to 18°C (yeast pitching temperature). The IceMaster G20 solves this problem and is an easy way to use sub-zero glycol to cool your fermenters to suitable temperatures for fermentation (NOTE: only use this device for wort cooling after you have already cooled below 50°C with water, otherwise risk overloading the compressor). This unit can be used with all these cooling options: a) BrewZilla 65L immersion chiller b) Coolossus stainless steel counterflow chiller c) BrewZilla 35L chiller d) 20 plate chiller. Fermenter/Kegmenter cooling: Let's be honest. Australia is a hot country, and in many cases heating isn't necessary, but cooling is essential. Particularly larger and well-insulated fermenters often generate enough heat to warm the fermenter, which is why large commercial breweries often don't have heating. They rely on yeast activity to heat the fermenter. The G20 can be used to cool various fermenters with products like the Temp Twister. Heating: The IceMaster G20 glycol chiller can also be set up to heat the reservoir. The two temperature controllers have a push-in port to control heating of your chosen device. Note: installation of such a heating device must be done by a qualified electrician. Compressor, NOT thermoelectric: While thermoelectric glycol units are significantly cheaper to manufacture, you need compressor cooling for quick and efficient wort cooling. Compressors increase the manufacturing cost, but since they are electrically 3-6 times more efficient for this application, the initial manufacturing cost easily pays for itself in electricity savings. Additionally, compressors are significantly more powerful and can pump more heat even in hot ambient temperatures where thermoelectric units struggle. So if you want to maintain the ability to cool a fermenter quickly, compressor cooling can't be beaten. Installation requirements: This unit requires 100mm clearance around all air vents. Regular maintenance of dust around the radiator is necessary for optimal efficiency. Ideally use KegLand glycol/water ratio of 20% to achieve -8°C freezing point.

IceMaster G80 Digital Glycol Cooler - Professional Solution for Beverage Cooling The IceMaster G80 professional glycol cooler is a powerful and reliable unit ideal for both commercial and personal use. This three-door model can accommodate up to 20 Cornelius Ball Lock kegs (19L) or 5 DIN-type kegs (50L). Advanced Technology and Functionality The unit is equipped with a modern Dixell temperature controller ensuring precise temperature regulation. The energy-efficient r290 refrigerant and Embraco 220V compressor provide optimal cooling efficiency. Quality Materials and Design 304 stainless steel construction with thick insulation layers, self-closing tempered glass safety doors with locking system, built-in LED lighting with external switch, integrated stainless steel drip tray with drainage system, 4 adjustable steel wire shelves, 6 sturdy casters for easy movement. Technical Specifications Unit dimensions: External: 2300mm x 710mm x 910mm (L x W x H) Internal: 1970mm x 550mm x 780mm (L x W x H) Distance between tap holes: 714mm Operating Conditions and Recommendations For optimal performance, it is recommended to use the unit indoors where temperature does not exceed 30°C and relative humidity remains below 55%. The unit is designed for professional use in bars, restaurants, and manufacturing facilities where stable beverage temperature is required. The IceMaster G80 glycol cooler is a reliable investment for your business's efficient operation, offering quality cooling system and dependable performance in daily use.

Cooling box with two taps and cooling plate, portable

Unlike many other portable beer cooling boxes, this model is equipped with a quality cooling box. This is a rotomolded cooling box with high-density PU insulation that can keep ice in the cooler for several days. With a built-in bottle opener, drink holders, and a fisherman-friendly ruler, it's the best available on the market.

The unit's cooling plate is made from new high thermal conductivity aluminum, while taps, shanks, and other parts are made of stainless steel.

Often, other portable cooling systems are made with stainless steel coils. These are cheaper to produce, but cast aluminum cooling plates have high thermal mass, acting like a large heat sink and helping transfer heat more efficiently. Another advantage of cast aluminum cooling plates is that they are compact and allow more free space in the cooler, so you can place other drinks above the cooling plate.

If you're looking for a commercial-grade portable cooling box that will last a lifetime, this is what you need.

This kit includes: 1 x 35L Jeti Fundra cooler, 2 x Nukatap FC Gen2 taps, 2 x stainless steel long shank with Duotight fittings, 2 x black plastic tap handles (long slender type), 4 x Duotight 8mm elbow fittings, 1 x 5mm x 8mm EVABarrier beer line, 4 x Duotight 8mm x FFL fittings

The cooling box has all holes pre-drilled for your convenience. You just need to push the hoses together, tighten a few nuts, and you're ready to pour drinks.

NOTE: Kegs and connectors must be purchased separately.

INSTRUCTIONS: 1. Connect the kegs to the beer inlet lines of the cooler. Fill the cooling plate with beer. It's important to fill the cooling plate tubes with beer FIRST. If there's water in the tubes and you then put very cold ice on the cooling plate, the water in the tubes might freeze, blocking fluid flow. So ensure there's beer in the tubes, as full-strength beer freezes at 4°C lower than water. 2. Fill the cooler with ice. For best results, THE ICE MUST BE IN CONTACT with the aluminum cooling plate. To ensure ice contact with the cast aluminum, leave the cooler drain open so water can drain out. If you leave water in the cooler, the ice will eventually float and lose contact with the cooling plate. 3. Set the regulator to about 30 psi. This high pressure is necessary to push the beer through the cooling plate, which has significant tube resistance.

NOTE: If your kegs are cold and you're using CO2 for dispensing, remember that extended periods at elevated pressure can over-carbonate the beer. If your kegs are at room temperature, this shouldn't be an issue as CO2 doesn't readily dissolve in warm beer. However, if you do have cold kegs and are dispensing at elevated pressure, you might consider using either pure nitrogen or a CO2/nitrogen mix for dispensing. Alternatively, if you're only dispensing at elevated pressure for a few hours, this usually isn't long enough for the beer to over-carbonate.

Beer Cooler Grand Deluxe 3 with two glass doors, stainless steel Our Grand Deluxe 3 models are made and built for durability in commercial environments but are also perfect for home bars or small cafes. This two-door model accommodates the largest combination of kegs. Fits 12 x 19L Cornelius Ball Lock kegs OR 3 x 50L DIN-type kegs or both combined as desired. Taps sold separately. If your location lacks a forklift, you may need tailgate service as the Grand Deluxe is quite heavy and courier companies may have difficulty unloading it. If you need this service, please email or call us. Recent Grand Deluxe 3 updates: Durable Dixell temperature controller. We previously had issues with Carel temperature controllers, so we've upgraded to reliable Dixell controllers. R290 refrigerant. It's more electrically efficient, environmentally friendly, and provides better cooling capacity. Embraco compressor - 220V Features: 304 stainless steel worktops with thick foam layer helping reduce temperature loss from the cooler. Full stainless steel finish on sides and back. Double-glazed tempered safety glass with self-closing lockable doors as standard (6 keys). External LED lighting switch. Built-in recessed stainless steel drip tray with installed drain pipes. One tap mounting hole pre-installed. 2 rubber-coated steel wire shelves for bottles and cans. 4 heavy-duty castor mounts (not installed). Climate class 4. Dimensions: External dimensions: 1495mm (L) x 705mm (W) x 910mm (H) [without 100mm castors] Internal dimensions: 1160mm (L) x 550mm (W) x 780mm (H) Please note: 1. All professional-grade equipment requires calibration during setup and periodic maintenance. This ensures your system works correctly before being left unattended. This typically involves Grand Deluxe 3 defrost cycles and temperature calibration. As we don't know where and under what conditions the unit will be installed, default settings may not always suit your usage. 2. This is a professional-grade unit with high cooling capacity. The powerful fans in this unit are louder than smaller Series X and Series 4 beer coolers. 3. These professional-grade coolers are hand-built and may contain some minor cosmetic scratches or dents. 4. We prefer customers to collect these from our distribution center as they are quite large and can be challenging to transport. If you opt for us to arrange transport, please note they may arrive with some cosmetic marks/scratches/dents from handling, but we guarantee the cooler's cooling capacity. 5. Any cooler dispensing liquid should not be stored on surfaces that can be damaged. Accidents happen and condensation can drip if the unit is loaded beyond its capabilities. Climate Class 4 - Recommended for indoor use where temperature doesn't exceed 30°C and relative humidity 55%. If using outdoors, remember the unit will run longer and seasonal defrosting will vary depending on temperature/humidity levels. These units don't have heated doors, if area exceeds 55% relative humidity, frost/increased condensation will form on doors. Operating principle: The Grand Deluxe 3 beer cooler is designed for cooling and maintaining beer kegs at optimal temperature. The unit enables storage of serving-ready beer and dispensing through taps, ensuring professional beer serving capability.