Average power: 3.0 kW (petrol) / 2.6 kW (LPG). Maximum power: 3.5 kW (petrol) / 3.0 kW (LPG). Average voltage: 230V. Average frequency: 50 Hz. Current: 13.1A (petrol) / 11.4A (LPG). Mobility: Portable handle. Displacement: 141cc. Sine wave fluctuation: <3%. Starting system: manual start and electronic start. Fuel tank capacity: 6L. Fuel consumption ratio @100%: 1.8L/H. Fuel consumption ratio @50%: 1.1L/H. Fuel: petrol / liquefied petroleum gas (LPG). Recommended oil: SAE 10W-40. Protection: overload warning. Dimensions (L×W×H) mm: 590 × 365 × 530 mm. Net weight: 28 kg. The ECO throttle increases fuel efficiency, long operating times and engine life.

Average power: 1.8 kW (petrol) / 1.5 kW (LPG). Maximum power: 2.0 kW (petrol) / 1.7 kW (LPG). Average voltage: 230V. Average frequency: 50 Hz. Current: 7.8A (petrol) / 6.6A (LPG). Mobility: Portable handle. Displacement: 79.7cc. Sine wave fluctuation: <3%. Starting system: manual start. Fuel tank volume: 5L. Fuel consumption ratio @100%: 1.1L/H. Fuel consumption ratio @50%: 0.6L/H. Fuel: petrol / liquefied petroleum gas (LPG). Recommended oil: SAE 10W-40. Protection: overload warning. Dimensions (L×W×H) mm: 605 × 350 × 510 mm. Net weight: 20 kg. The ECO throttle increases fuel efficiency, long operating times and engine life.

Lalvin W15® has been selected as the best yeast in its category by the Swiss Wädenswil Wine Institute. The yeast is intended for the production of dry white and red wines. During fermentation, little heat is generated, which is good for the freshness and fruitiness of the wine. In addition, it keeps the pH low. Lalvin W15 increases the fullness of wine by producing high levels of glycerol and succinic acid. Suitable for white, red and rosé wines, MLF (lactic acid bacteria) is recommended, high glycerol and succinic acid production, increases e.g. natural properties of the grape. Package 125g, dosage 20-25g/hl for white or pink and 25-35g/hl for red. In the case of red wine, a 125g package will make approx. 1200l and white approx. 1500 l. Fermentation temperature +10...+23C. Alcohol max. 15% Usage: Use warm water (35-37C) in 10x more quantity than yeast and mix well. Let stand for 20 minutes and then add to the wine..

Beer starter kit 20L, light. The brewing instructions are written on the canister of maltose! The kit contains everything you need to brew beer at home. In the set: fermentation vessel, beer extract maltose Adramees 2.5kg, mixing paddle-spoon, bottler (bottle filler), golden crown caps 26mm 100pcs, stopper for crown caps and additionally sulphite Tannisol 10g.NB! Sulphite is for disinfecting the fermentation vessel before you start brewing!

Beer starter kit 20L, dark. The brewing instructions are written on the canister of maltose! The kit contains everything you need to brew beer at home. In the set: fermentation vessel, beer extract maltose Vahva Munk 2.5kg, mixing paddle-spoon, bottler (bottle filler), golden crown caps 26mm 100pcs, stopper for crown caps and additionally sulphite Tannisol 10g. NB! Sulphite is for disinfecting the fermentation vessel before you start brewing!

Georges Beer IPA kit make 5 Liters around 8.8 Pints. 4.1% ABV Approx. The Georges beer kits are easy to handle and make more so if you are finding 23 litres in a standard beer kit just too heavy. The Georges IPA kit is an all-malt kit, so no need for extra fermenting sugar. There is 650grms of malt extract in every pack, which will produce a high-quality beer with great character. The beer kits do require basic equipment to produce but being only 5 litres, they won't take up too much room. George Beer also offers Starter kit with everything you need to make the beer kits, Apart from Bottles and water. Fermentation time will be around 5 - 8 Days once made and put into bottles best to keep these for about 10-14 days before drinking. Inside a Georges Starter kit you get: 1 x Georges IPA Beer Kit, 1 x Fermenter, 1 x Hammer Capper, Crown Caps, 1 x Thermometer, 1 x Sugar Dispenser, Instructions in 5 Languages. All the equipment is re-usable, but will require cleaning and sterilising before use. Georges IPA Beer Kit Ingredients: Liquid Malt Extract (Barley), Invert Sugar Syrup, Dried Yeast (Yeast Emulsifier(E491)), Hop Extract. Georges IPA Beer Kit Nutritional Information Per 100g Unfermented: Energy - 1314 KJ / 311 Kcal. FAT - 0.2g, Saturates 0.0g. Carbohydrate - 72.6g, Sugars 58.1g. Protein - 32g. Salt - 0.03g. Sodium - 12.0mg.

Georges Beer Lager Kit make 5 Liters around 8.8 Pints. ABV 4.1% Approx. The Georges beer kits are easy to handle and make more so if you are finding 23 litres in a standard beer kit just too heavy. The Georges Lager kit is an all-malt kit, so no need for extra fermenting sugar. There is 650grms of malt extract in every pack, which will produce a high-quality beer with great character. The beer kits do require basic equipment to produce but being only 5 litres, they won't take up too much room. George Beer also offers Starter kit with everything you need to make the beer kits, Apart from Bottles and water. Fermentation time will be around 5 - 8 Days once made and put into bottles best to keep these for about 10-14 days before drinking. Inside a Georges Starter kit you get: 1 x Georges Lager Kit, 1 x Fermenter, 1 x Hammer Capper, Crown Caps, 1 x Thermometer, 1 x Sugar Dispenser. Instructions in 5 Languages. All the equipment is re-usable, but will require cleaning and sterilising before use. Georges Lager Beer Kit Ingredients: Liquid Malt Extract (Barley), Invert Sugar Syrup, Dried Yeast (Yeast Emulsifier(E491)), Hop Extract. Georges Lager Beer Kit Nutritional Information Per 100g Unfermented: Energy - 1315 KJ / 311 Kcal. FAT - 0.2g, Saturates 0.0g. Carbohydrate - 72.7g, Sugars 58.1g. Protein - 3.2g. Salt 0.03g. Sodium - 12.0mg.

Georges Beer Pilsner kit make 5 Liters around 8.8 Pints. 4.1% ABV Approx. The Georges beer kits are easy to handle, more so if you are finding 23 litres in a standard beer kit just too heavy. The Georges Pilsner kit is an all-malt kit, so no need for extra fermenting sugar. There is 650grms of malt extract in every pack, which will produce a high-quality beer with great character. The beer kits do require basic equipment to produce but being only 5 litres, they won't take up too much room. George Beer also offers Starter kit with everything you need to make the beer kits, Apart from Bottles and water. Fermentation time will be around 5 - 8 Days once made and put into bottles best to keep these for about 10-14 days before drinking. Inside a Georges Starter kit you get: 1 x Georges Pilsner Kit, 1 x Fermenter, 1 x Hammer Capper, Crown Caps, 1 x Thermometer, 1 x Sugar Dispenser, Instructions in 5 Languages. All the equipment is re-usable, but will require cleaning and sterilising before use. Georges Pilsner Beer Kit Ingredients: Liquid Malt Extract (Barley), Invert Sugar Syrup, Dried Yeast (Yeast Emulsifier(E491)), Hop Extract. Georges Pilsner Beer Kit Nutritional Information Per 100g Unfermented: Energy - 1314 KJ / 311 Kcal. FAT - 0.2g, Saturates 0.0g. Carbohydrate - 72.6g, Sugars 58.1g. Protein - 3.2g. Salt - 0.03g. Sodium - 12.0mg.

The new pressure tank (beer tank) made of high-quality stainless steel has a handy weight and size. The container is easy to fill-empty and clean... thanks to the large opening on the top of the container. The surface of the stainless tank is protected by a rubber lower protection ring and a metal handle. Technical data: size-18.9L / Dimensions: height 555mm / diameter 232mm / Weight: 3.35kg / pressure relief valve 5bar. In addition to the pressure tank, it is necessary to purchase an outlet valve kit. With this kit, you can naturally release cider under pressure. If you need CO2, the following are added: Variant 1: Mini-balloon set Connecting joint Cylinders Variant 2: Connecting joint 2 pcs..

new HDPE plastic drum 55l with a screw-on airtight and watertight lid that complies with food standards. Height 520mm and diameter 410mm, opening 282mm. The maximum filling temperature is 70°C - before closing and stacking the containers, the contents must be cooled to a temperature of 30°C. Screw-on lid saves time, Very low moisture and vapor permeability, UN certificate (1H2) for liquids, food storage, lockable and durable lid, Reusable material.

Ingredients: black chokeberry.Organic aronia flour is 100% natural, no preservatives, dyes or sugar have been added, made from dried and ground aronia berries grown in the nature of Pärnu County. The product is rich in vitamins and antioxidants. Suitable for use as a healthy additive and for flavoring various drinks, for example beers, ciders, wines, as well as porridges, smoothies, muesli, baked goods, marinades, etc.Did you know that the weight of berries decreases 8-15 times when dried? Therefore, 120 g of berry powder = 1 kg of fresh berries.

Organic aronia juice 100% with added vitamin C. The aronia berry is bursting with vitamins, bioactive substances and antioxidants, which are also perfectly preserved in the juice made from aronia and strongly promote health. In addition to vitamins, chokeberry also contains a number of less common nutrients such as quercetin, peonidin, delphinidin, petunidin, epicaticin, caffeic acid and malvidin, which also offer protection against free radicals. Aronias are also rich in carotene, lutein and zeaxanthin. The latter has the ability to photofilter UV radiation and protect the eyes, especially in older people, from macular degeneration. In addition, chokeberries are rich in C, A, E, B group, P and PP group vitamins and minerals, such as potassium, iron and manganese, as well as iodine, copper and boron..

container on stainless legs for fermentation and/or short-term storage of wine. The set includes: legs; conical base; bottom valve 1" (220mm from the plane); sampling valve 1/2"; upper valve 1/2", upper spring cover, floating cover. Dimensions: diameter 636mm and height 1320mm. Leg height 320mm..The size of the tank can vary up to max. +/-10%

High-quality copper and handcrafted distiller from a Portuguese manufacturer. Container 3l, dimensions 53x48x18cm, copper thickness 1.0mm, weight 3kg, with thermometer. PS Dimensions and weight may differ from those indicated above, as it is a handmade product.

SPECIAL PRICE FOR DEMO MODEL ONLY!Professional and high-capacity filter unit with filter plates 40x40cm 20 pcs. Suitable for filtering wines, sparkling wines, oils, low alcohol liqueurs and herbal drugs. Inlet and outlet control valves with a visual inspection spacer to check the output product. In addition, it is equipped with taps for air ventilation and the possibility to take samples of the processed product. Technical description: dimensions 100x60x900cm, weight 250 kg, plates 40x40cm, production capacity per hour (wine) 2000l, (oil) 350l, pressure 3 bar.

Cooler with an exclusive and nice design with 2 outputs, which also includes design lighting integrated into the housing. Cooler with compressor is suitable for Keykegs 2.8...3.2bar. After connecting to the mains, the device is ready for operation in 2..4 minutes. Temperature range +2...+10C. Cooling capacity 30l/h, with 1 outlet tap, cooling pipe 13.5jm, dimensions: 185x300x345mm, weight: 16.5kg, power consumption 267W/230V/50Hz/1.16A. connecting hoses: John Guest 3/8. When using a cooler, it is necessary to purchase additional pipe and tank fittings. The pressure from the CO2 cylinder is approx. 2.5...2.9bar if you use a metal barrel.

New pressure tank (beer tank) made of high-quality stainless steel - 2 fermentation vessels in one. The container is easy to fill-empty and clean... thanks to the large opening on the top of the container. Technical data: size 58L. Additional equipment: pressurization kit. Working pressure 3.5 bar, max pressure 5 bar.

Prepare your home wine or beer easily and quickly in a beautifully decorated 32-liter plastic fermentation vessel with a bottom valve and calibrated liter measuring lines. The lid of the container has a sealed hole into which the airlock is placed..

The device is designed to produce sparkling water by mixing drinking water and CO2 and is capable of producing 40 l of carbonated water per hour. Easy to connect to cooler and tap tower or faucet. An affordable solution for restaurants and other beverage establishments looking to expand their existing bar with perfectly chilled sparkling water. Advantages and useful functions: OUTPUT - the device is capable of producing up to 40 l/h, QUALITY - the materials used meet the strictest hygiene standards and ensure a long service life of the device, COMFORTABLE TO CARRY - easy and safe handling of the system thanks to the small size and the handle on top, CONSTRUCTION AND MAINTENANCE – Modern layout of LINDR cooling technology ensures ease of possible service and maintenance, PERFORMANCE, QUALITY, SIZE – best performance/quality/size ratio. POWER 345W/1.5A, NET WEIGHT 10kg, VOLTAGE (V) 220-240V 50Hz~1, BEVERAGE CONNECTION G 5/8, CO2 CONNECTION G 5/8.

A stable and well-standing model. Processes two cherries/plums at once. Productivity up to 20 kg/h..

Glass decorative barrel with wooden base and outlet valve. Suitable for serving different drinks and also for storage. Installing the valve on the keg: tighten the screw behind the valve enough to fit into the hole in the keg. Push the end of the valve into the hole in the keg and by slightly pulling the valve outwards, turn the valve until you feel it start to tighten.

Stainless steel transport container. For universal use, with a flat bottom, 2 handles, hermetically sealed lid (Ø 20 cm) and the possibility of a bottom drain valve. Stainless steel AISI 304. Volume: 50 liters, Ø x H: 37 x 55 cm.

Special container with reinforced base frame for transporting and storing food liquids such as juices, wines, water, etc. Pressure max. 0.09 atm. With food certificate. Dimensions 800x600x996mm. Stackable on top of each other..

Ingredients: mild blackcurrantOrganic blackcurrant flour is 100% natural, no preservatives, dyes or sugar have been added, it is made from dried and ground blackcurrants grown in the pure nature of Pärnumaa. The product is rich in vitamins and antioxidants. Suitable for use as a healthy additive and for flavoring various drinks, for example beers, ciders, wines, as well as porridges, smoothies, muesli, baked goods, marinades, etc.Did you know that the weight of berries decreases 8-15 times when dried? Therefore, 120 g of berry powder = 1 kg of fresh berries.

multifunctional stainless pot with a bottom stainless tap! Prepare food, boil, preserve and heat juice, etc. and behind a healthy lifestyle. Suitable for pasteurizing juice and bottling directly into bags. Viscous raw materials are not suitable for the processing of beer wort, syrup, milk, etc. Place the grid in the set on the bottom of the pot when heating with cans. Additional information: Stainless steel bowl size 27L; Productivity of juice pasteurization approx. 25l/h (+from 20C to +85 C approx. 60min depending on the ambient temperature) ; Very precise thermostat with LCD display 30...+100C; Timer: 1-120min; Overheating protection; Audio alarm when the temperature is reached; non-heating plastic cover; The set includes a grate on which it is convenient to make compotes or to disinfect tare; Power 2kw; Dimensions 415x414x455mm. 24 pcs on the base. . Claim submission period 2 years. Device warranty for companies 3 months..

New food grade (HDPE) plastic barrel with lid. Handles on the sides for more convenient transport. Height 610mm and diameter 400mm, neck 320mm, weight 2.2kg.

Prepare your home wine or beer easily and quickly. 50-liter plastic container with bottom valve and screw-on lid. There is a sealed hole on the lid of the container, into which the airlock is placed (accessory - sold separately). The set includes a blind cap to seal the container airtight. Dimensions: 40x36x56cm..