Raw material washing, crushing, pressing

Our belt presses can be disassembled without any tools in few minutes! Fully automatic operation, with closed work area, reduces the oxidation to the minimum. In the bottom of the machine, there are two spinning washer heads guarantees optimal cleaning during the process. The distance between the press cylinder and the juice collector tray reduced against foaming. Very easy to clean. With 4pcs vibration-free feet. Requires minimal maintenance. High-pressure washer and air compressor are essential for operating.Technical details: - Performance: 400 kg/h, - Electric demands: 1,5 kW, 230 V, 16 A, - Material: WNr. 1.4301, AISI 304 stainless steelDimensions: Length: 1425 mm, Width:   1310 mm, Height:  1197 mm, - Weight: 620 kg, - IP65 certified electronics, - Food industrial, massive polyester belt, - Belt: 2mm thick, density: 6×16 , filament/cm^2, ½ rate (suitable for large fiber-free juice), - High yield: 75% – depends on the freshness and quality of the fruits, - High-pressure washer demand: 360 L/h, - Compressed air demand: 50 L/h 6 bar, - Built-in inverter: steplessly adjustable belt speed, - Food industrial, massive polyester belt.

The basket of the powerful hydraulic press is the right size so that it is possible to get the maximum out of the product being pressed. With a simple and quick work process and therefore ideal for a small producer who wants to squeeze juice from fruits and other products (except stone fruits) Technical data: Beech wood press basket capacity - 30L; Productivity: approx. 300kg/h depending on the operator and the material to be pressed (10 work cycles 1h); Juice extraction efficiency: approx. 50-80% depending on the product; Dimensions: width 650mm; height 1400mm; depth 900mm; Cylinder diameter - 210mm; Working pressure - 10Mpa or 3T; Power source - 3F/400V or 220V/16A /1.5kW /1500 rpm (added to the price +190eur+km); Motor - IP54; Weight - 140 kg. 1 filter bag included..

Pasteurizers are equipped with spiral heat exchangers and a hot water circulation pump. The juice tube is located inside the hot water tube with a larger diameter - hot water and the juice to be pasteurized move in opposite directions to each other, ensuring even heating of the juice. The power of the pasteurizer is stepwise adjustable according to the number of working heaters. The thermostat ensures the maintenance of the hot water temperature set by the user, which should be 4-5 degrees warmer than the temperature of the juice coming out. The EHA18E, EHA27E and EHA45E models are equipped with a juice pump and the ability to automatically adjust the juice temperature. Pasteurizer EHA-18E productivity up to 200l/h and power is 18kw (2x9kw) 400V/32A. Warm-up time approx. 15 min. Dimensions 750x500x1150 mm, weight 150 kg. Complete device with juice pump and automatic juice/raw temperature control.

Pasteurizers are equipped with spiral heat exchangers and a hot water circulation pump. The juice tube is located inside the hot water tube with a larger diameter - hot water and the juice to be pasteurized move in opposite directions to each other, ensuring even heating of the juice. The power of the pasteurizer is stepwise adjustable according to the number of working heaters. The thermostat ensures the maintenance of the hot water temperature set by the user, which should be 4-5 degrees warmer than the temperature of the juice coming out. In the case of EHA18, EHA27 and EHA45 models, setting the juice temperature is by changing the flow rate using a manually adjustable valve, an external pump is required to feed the raw juice. EHA18E, EHA27E and EHA45E are equipped with a juice pump and the ability to automatically adjust the temperature of the juice. Pasteurizer EHA-18E productivity up to 200l/h and power is 18kw (2x9kw) 400V/32A. Warm-up time approx. 15 min. Dimensions 750x500x1150 mm, weight 150 kg. Complete device with juice pump and automatic juice/raw temperature control.