Pressure meters

Single-stage CO2 cylinder regulator-regulator with variable output pressure control. Allows the gases leaving the cylinder to be depressurized to the required level/pressure and ensures that the pressure is kept as constant as possible at the outlet... regardless of the change in inlet pressure. The regulator is equipped with a safety valve through which excess gas released from the exhaust pressure chamber exits. One monometer indicates the level of compressed air in the CO2 cylinder and the other in the output piping. For example, if you want to pressurize your tank with 3bar, the manometer must be in the position 10l/min, and for 2bar, 7l/min. Bar / l/min unit conversion table included. Technical data: input pressure 185bar, output pressure 0.5-10bar, output capacity 15m3/h, input thread W21.8x1 1 14, output nut thread G1/4 and pipe connection 6.3mm. 

Manometer for CO2 pressure with 1/4 thread.

Manometer for CO2 pressure with 1/4 thread.

For control measurement of carbon dioxide pressure directly in the bottle. Push the needle through the cap (a soft cap, e.g. corkscrew caps) and you will see the pressure in the bottle on the manometer.

Handy carbonic acid meter for determining the CO2 pressure in a crown cap, PET or champagne bottle (0.25-0.75l) also for monitoring the second fermentation. With a needle that pierces the cap... measuring range PET/crown cap: -1...5Bar, shampoo bottle -1...+9bar, accuracy: 0.1 bar..

For control measurement of carbon dioxide pressure directly in the bottle..

Handy carbonation meter for determining the CO2 pressure of beer, water, etc. in bottles with a crown cap (0.25-0.7 l) and for monitoring the second fermentation. With a needle that pierces the crown cap. Range: 0-6 bar, accuracy: 0.1 bar, for 26mm crown cap, Attention, this product does not work on the following bottles: Beer bottle Belge 75 cl, crown cap 26 mm, Champagne bottle 75 cl, crown cap 26 mm.

For control measurement of carbon dioxide pressure directly in the bottle. Push the needle through the cap (a soft cap, e.g. corkscrew caps) and you will see the pressure in the bottle on the manometer..

Connects with a thread directly to the CO2 inlet of the KEG to measure the CO2 pressure in the tank. Fits 18.9L keg with thread. If necessary, the valve can be opened to reduce the pressure. Manometer 0.69...4bar..

Specifications:Battery life: more than 2 years (using the mini gauge once a day).Battery type: CR2032. Auto battery saver: the screen automatically turns off after 15 seconds. Radial O-ring stem: 7.8 mm bore. Dimensions: 27 mm x 27 mm. Batteries included.

Manometer, dimensions (L x W x H) 140 x 110 x 150 mm.

Manometer for CO2 pressure with 1/4 thread.