Heat exchangers

Stainless steel (suitable for nutrients) 36-plate heat exchanger for heating or cooling. Connection nuts 3/4" external thread. Hose connections for 12mm hose included. For example, it is possible to cool 60L of almost +95C liquid to 20C in 10 minutes if the coolant is +10C..

Made of stainless steel (suitable for nutrients) and laser technology, the surfaces of the heat exchanger are smooth and therefore the device is self-cleaning. In addition, the device can be completely disassembled. By ensuring the amount of cooling or heating water is 2750l/h and the cooled/heated liquid is 900l/h, the temperature difference is 3 degrees. The additional flow must be 3x greater than the raw material flow to ensure the correct temperature. Saves energy costs up to 50%. Heat exchangers of different capacities and sizes are available for quantities up to 21,000 l/h..

The Maxi 80 heat exchanger is made of AISI 304 stainless steel (18/10). Complete with stainless steel interface F 1 "¼ and 3/4" M and 4 stainless steel hose connections with 20 mm 3/4 "F nut (as in the picture). Professional model suitable for transferring the temperature of one fluid to another fluid. Heat exchange is carried out by the stainless steel plates of the heat exchanger without the two fluids mixing. The device is removable and removable and the seals between the plates ensure perfect isolation. The fluids flow in the opposite direction and thanks to the wavy surface of the plate, it causes a high turbulence of the fluids flowing inside, improving the heat exchange. Complies with European Directive 97/23 / EC (PED). Advantages: high coefficient of heat exchange, LIQUIDS DO NOT MIX, FLEXIBLE (possibility of increasing the plates), DURABILITY thanks to the regeneration of plates and / or replacement of various components. TECHNICAL CHARACTERISTICS: CONNECTIONS 1 "1/4, MAXIMUM WORKING PRESSURE: 10 bar, Plate surface: 0.08 square meters, Plate liquid volume: 0.25L, WEIGHT OF ONE PLATE: 0.5 kg, WEIGHT: 50kg, Number of plates: 22 CLEANING AND SANITIZATION: The device must be cleaned immediately after use to prevent residues from drying and sticking to the walls of the heat exchanger and interior surfaces: first rinse with hot water and then use e.g. OXI or some other basic cleaning agent with warm water. Then rinse again with water. Store the heat exchanger in a clean and dry place. Disinfection is always carried out before the next use: circulate a solution of water and acid cleaner or OXI solution. Warning: Gloves, goggles and a mask are always recommended at this stage..

Heat exchanger clamp for attaching to the ground and fixing, which in turn simplifies the cooling process..

Seal for maxi 80 series replacement plate. Thanks to this spare part, it is possible to easily replace the old seal. This product only contains a gasket.

A heat exchanger with openable plates allows the plates to be cleaned and added later. By adding cooling plates, it is possible to increase the heat exchange on the heat exchanger, thereby reducing the cooling rate of the wort. When you buy this product, you get a stainless steel plate and gasket ready to use..

Stainless steel (V4A) cooling and heating pipe 2.5 m long..

Stainless steel cooling tube 9.5mm and sphere diameter 20cm, total height 50cm and spiral height 12cm. Warranty 3 years. Connection fittings Gardena watering hose fittings. It is possible to cool 20l approx. +100C feed liquid for 20 min. to +20C if the coolant is +13C..