Flow pasteurizers

Pasteurizer for cold and closed bottles with insulated chamber. On top of the device is a water collector from which hot water pours onto the bottles, pasteurizing the bottles according to the specified temperature. The temperature sensor is placed in a special test bottle. The set includes a basket trolley for bottles, 1pc for 360 1l bottles. Automatic temperature control with water and product sensor. Heat supply from the customer's heating boiler. Capacity/productivity: 360 pcs. 1l bottles/h. Heating power: customer's heating system min. 36kW, Power supply: 400V / 16A / 1.5 kW, Dimensions: 200x1800x2500mm, Weight: 650 kg.

Pasteurizer for cold and closed bottles with insulated chamber. On top of the device is a water collector from which hot water pours onto the bottles, pasteurizing the bottles according to the specified temperature. The temperature sensor is placed in a special test bottle. The set includes a basket trolley for bottles, 1pc for 360 1l bottles. Automatic temperature control with water and product sensor. Heating equipment 36kw/63A/400V heaters. Capacity/productivity: 360 pcs. 1l bottles/h. Heating power: customer's heating system min. 36kW, Power supply: 400V / 16A / 1.5 kW, Dimensions: 200x1800x2500mm, Weight: 650 kg.

The pasteurizer used to heat liquid, low viscosity foods, and equipment for heat treatment of drinking water. The machine has been designed accordance with security requirements. The heat exchanger does the heat treatment by a fitted stainless steel tube.The heat is provided by a gas or fuel oil boiler. The heating water temperature is controlled by the boiler. The temperature of the treated liquid is controlled by a by-pass valve. Temperature check at two points, in the heat exchanger and once on the outlet. The machine automatically controls the heat exchanger temperature. The pasteurizer works automatically. If the temperature of the juice falls below the desired temperature, the machine disabled and the juice circulates in the by-pass system until the temperature reaches the set level. Thereafter the machine let the filling. At the end of the work, the tube spiral can be cleaned very easily with the help of a sponge ball. It requires minimal maintenance.Technical details:-Performance: 700 L/h (When heated from 20 °C to 80 °C)-Electric demands: 800W , 230 V, 6 A-Heat performance: 70 kW -Fuel: propane, PB, natural gas-Material: Wnr. 1.4301, AISI 304 stainless steel-Weight: 350 kgDimensions: Length: 850 mm, Width:  690 mm, Height: 1700 mm-IP65 certified electronics-Connections: DN 25-Flue gas discharge:: 110 mm diameter-Automatic temperature control-Automatic  by-pass rendszer-Easy to clean with sponge balls-Requires minimal maintenanceOption:- Optinal buffer tank (it can be placed above the pasteurizer).The buffer tank is fully automatic and communicates with the pasteurizer. If the juice is too low, The system will automatically shut down temporarily, until the process starts again. It can work with both bottle filler at the same time. - Semi-automatic Bag in Box filler: MKBiB Top 180 filler - 6 headed bottle filler moduleAccessories: - Sponge balls for cleaning

Pasteurizer with gas burner and heat exchanger. Thanks to the automatic temperature control, the device is suitable for gentle heating of fruit or vegetable juices. With automatic control and temperature control, which switches to standby mode when the juice tank is full. The heat exchanger heats the heating medium not only by the flame of the gas burner, but also by the multiple heat transfer of the flue gases, thus achieving maximum energy savings and the lowest possible operating costs. Technical data: Productivity: 400 L/h (at filling temperature 80°C), Required power: 1 kW, 230 V, 6 A, Gas burner: 30 kW, Fuel: propane, PB or natural gas, Material: Wnr. 1.4301, AISI 304 stainless steel, Weight: 300 kg, IP65 Electric control box, Connection: DN 25, Flue gas channel: 60/100 mm, Automatic temperature control, Automatic bypass system, Easy to clean with sponge balls, Minimal maintenance Optional accessories: Manual bottle filler, Manual Bag in Box filler with digital scale, Semi-automatic bag in box BIB TOP 180, Automatic dosing.

The pasteurizer used to heat liquid, low viscosity foods, and equipment for heat treatment of drinking water. The machine has been designed accordance with security requirements. The heat exchanger does the heat treatment by a fitted stainless steel tube.The heat is provided by a gas or fuel oil boiler. The heating water temperature is controlled by the boiler. The temperature of the treated liquid is controlled by a by-pass valve. Temperature check at two points, in the heat exchanger and once on the outlet. The machine automatically controls the heat exchanger temperature. The pasteurizer works automatically. If the temperature of the juice falls below the desired temperature, the machine disabled and the juice circulates in the by-pass system until the temperature reaches the set level. Thereafter the machine let the filling. At the end of the work, the tube spiral can be cleaned very easily with the help of a sponge ball. It requires minimal maintenance.Technical details:Performance: 500 L/h (When heated from 20 °C to 80 °C)Electric demands: 1 kW, 230 V, 6 AHeat performance: 55 kWFuel: propane, PB, natural gasMaterial: Wnr. 1.4301, AISI 304 stainless steelWeight: 350 kgDimensions: Length: 1908 mmWidth:  1581 mmHeight: 1935 mmIP65 certified electronicsConnections: DN 25Flue gas discharge:: 110 mm diameterAutomatic temperature controlAutomatic  by-pass rendszerEasy to clean with sponge ballsRequires minimal maintenance

Technical details:-Performance: 1200 L/h (When heated from 20 °C to 80 °C)-Electric demands: 2100W, 230 V, 6 A-Heat performance: 120 kW-Fuel: propane, PB, natural gas-Material: Wnr. 1.4301, AISI 304 stainless steel-Weight: 430 kgDimensions:  Length: 1210 mm, Width:  890 mm, Height: 2070 mm-IP65 certified electronics-Connections: DN 25-Flue gas discharge:: 110 mm diameter-Automatic temperature control-Automatic  by-pass rendszer-Easy to clean with sponge balls-Requires minimal maintenanceOption:- Optinal buffer tank (it can be placed above the pasteurizer).The buffer tank is fully automatic  and communicates with the pasteurizer. If the juice is too low, The system will automatically  shut down temporarily, until the process starts again. It can work with both bottle filler at the same time. - Semi-automatic Bag in Box filler: MKBiB Top 180 filler - 6 headed bottle filler moduleAccessories:  - Sponge balls for cleaning

Hot steam pasteurizer with heat exchanger and condensate drain. Complete set: pressure regulator, water circulation with circulation pump, safety automation, expansion tank, water tank for constant steam regulation, pipe-in-pipe heat exchanger, precise and automatic temperature control, juice pump and full temperature regulation, placed on a stainless steel base frame (steam generator not included), productivity 1000l/h, power 90kw (gas or oil), power supply 400V..

Pasteurizers are equipped with spiral heat exchangers and a hot water circulation pump. The juice tube is located inside the hot water tube with a larger diameter - hot water and the juice to be pasteurized move in opposite directions to each other, ensuring even heating of the juice. The power of the pasteurizer is stepwise adjustable according to the number of working heaters. The thermostat ensures the maintenance of the hot water temperature set by the user, which should be 4-5 degrees warmer than the temperature of the juice coming out. In the case of EHA18, EHA27 and EHA45 models, setting the juice temperature is by changing the flow rate using a manually adjustable valve, an external pump is required to supply the raw juice. EHA18E, EHA27E and EHA45E are equipped with a juice pump and the ability to automatically adjust the temperature of the juice. Pasteurizer EHA-18 productivity up to 200l/h and power is 18kw (2x9kw) 400V/32A. Warm-up time approx. 15 min. Dimensions 750x500x1150 mm, weight 150 kg. Setting the temperature of the juice by changing the flow rate using a manually adjustable valve, an external pump is required to supply the raw juice..

Pasteurizers are equipped with spiral heat exchangers and a hot water circulation pump. The juice tube is located inside the hot water tube with a larger diameter - hot water and the juice to be pasteurized move in opposite directions to each other, ensuring even heating of the juice. The power of the pasteurizer is stepwise adjustable according to the number of working heaters. The thermostat ensures the maintenance of the hot water temperature set by the user, which should be 4-5 degrees warmer than the temperature of the juice coming out. The EHA18E, EHA27E and EHA45E models are equipped with a juice pump and the ability to automatically adjust the juice temperature. Pasteurizer EHA-18E productivity up to 200l/h and power is 18kw (2x9kw) 400V/32A. Warm-up time approx. 15 min. Dimensions 750x500x1150 mm, weight 150 kg. Complete device with juice pump and automatic juice/raw temperature control.

Pasteurizers are equipped with spiral heat exchangers and a hot water circulation pump. The juice tube is located inside the hot water tube with a larger diameter - hot water and the juice to be pasteurized move in opposite directions to each other, ensuring even heating of the juice. The power of the pasteurizer is stepwise adjustable according to the number of working heaters. The thermostat ensures the maintenance of the hot water temperature set by the user, which should be 4-5 degrees warmer than the temperature of the juice coming out. In the case of EHA18, EHA27 and EHA45 models, setting the juice temperature is by changing the flow rate using a manually adjustable valve, an external pump is required to supply the raw juice. EHA18E, EHA27E and EHA45E are equipped with a juice pump and the ability to automatically adjust the temperature of the juice. Pasteurizer EHA-27 productivity up to 300l/h / +80°C and power is 27kw (3x9kw) 400V/63A. Warm-up time approx. 10 min. Size 750x500x1400mm, weight 150kg. Setting the temperature of the juice by changing the flow rate using a manually adjustable valve, an external pump is required to supply the raw juice..

Pasteurizers are equipped with spiral heat exchangers and a hot water circulation pump. The juice tube is located inside the hot water tube with a larger diameter - hot water and the juice to be pasteurized move in opposite directions to each other, ensuring even heating of the juice. The power of the pasteurizer is stepwise adjustable according to the number of working heaters. The thermostat ensures the maintenance of the hot water temperature set by the user, which should be 4-5 degrees warmer than the temperature of the juice coming out. In the case of EHA18, EHA27 and EHA45 models, setting the juice temperature is by changing the flow rate using a manually adjustable valve, an external pump is required to supply the raw juice. EHA18E, EHA27E and EHA45E are equipped with a juice pump and the ability to automatically adjust the temperature of the juice. Pasteurizer EHA-27E productivity up to 300l/h / +80°C and power is 27kw (3x9kw) 400V/63A. Warm-up time approx. 10 min. Size 750x850x1400mm, weight 180kg..

Pasteurizers are equipped with spiral heat exchangers and a hot water circulation pump. The juice tube is located inside the hot water tube with a larger diameter - hot water and the juice to be pasteurized move in opposite directions to each other, ensuring even heating of the juice. The power of the pasteurizer is stepwise adjustable according to the number of working heaters. The thermostat ensures the maintenance of the hot water temperature set by the user, which should be 4-5 degrees warmer than the temperature of the juice coming out. In the case of EHA18, EHA27 and EHA45 models, setting the juice temperature is by changing the flow rate using a manually adjustable valve, an external pump is required to supply the raw juice. EHA18E, EHA27E and EHA45E are equipped with a juice pump and the ability to automatically adjust the temperature of the juice. Pasteurizer EHA-40 productivity up to 400l/h / +80°C and oil burner capacity. 48kw. Size 1000x1000x1200mm, weight 280kg. The set includes a juice pump and a fully automatic control center..

Pasteurizer EHA-45 productivity up to 450l/h / +80°C and power is 45kw 400V/80A. Warm-up time approx. 8 min. Size 750x500x1400mm, weight 200kg. Setting the temperature of the juice by changing the flow rate using a manually adjustable valve, an external pump is required to supply the raw juice..

Pasteurizers are equipped with spiral heat exchangers and a hot water circulation pump. The juice tube is located inside a larger diameter hot water tube - hot water and juice to be pasteurized move in opposite directions to each other, ensuring uniform heating of the juice. The power of the pasteurizer is stepwise adjustable according to the number of working heaters. The thermostat ensures the maintenance of the hot water temperature set by the user, which should be 4-5 degrees warmer than the temperature of the juice coming out. In the case of EHA18, EHA27 and EHA45 models, setting the juice temperature is by changing the flow rate using a manually adjustable valve, an external pump is required to feed the raw juice. EHA18E, EHA27E and EHA45E are equipped with a juice pump and the ability to automatically adjust the temperature of the juice. Pasteurizer EHA-45E productivity up to 450l/h / +80°C and power is 45kw 400V. Warm-up time approx. 8 min. Size 750x850x1400mm, weight 230kg. Setting the temperature of the juice by changing the flow rate using a manually adjustable valve, an external pump is required to supply the raw juice..

The pasteurizer is designed for pasteurizing larger quantities of different juices. It consists of a 50L stainless pot, a lid and a heat exchanger coil. By heating the bottom of the pot, the water heats up, which in turn transfers the heat to the juice moving along the spiral. Productivity depends on the power of the heat source. After bottling, it is advisable to refrigerate as soon as possible, thus preserving the natural taste and as many nutrients as possible. Specifications: 50L stainless steel pot, spiral lid, output thermometer temperature up to 120 ° C, juice drain regulator, all connections are removable and DIN standard.

Stainless pasteurizer, to which you can purchase either a storage bag bottler with a productivity of up to 180l/h (+20C to +80C) or a bottle bottler - one of the selected bottlers is included in the price of the device. Electric power 18kw/400V/32A. Dimensions: 750x2050x1170 mm.

Stainless (Country of manufacture: Slovenia) pasteurizer with productivity up to 140l/h. A bottle bottler or bag-in-box bottler is available as an accessory. Electric power 12kw. Fully automatic - automatic on/off of the set temperature..

Stainless (Country of manufacture: Slovenia) pasteurizer with productivity up to 180l/h. A bottle bottler or bag-in-box bottler is available as an accessory. Electric power 18kw. Fully automatic - automatic on/off of the set temperature..

High-quality instant pasteur made in Slovenia. Technical data: Productivity 60-90l/h, Dimensions height 1800mm, Ø400, Pasteurization 75-85 C, Power 6kw/380V, Automation: adjustable digital thermostat for determining heating water heat and manual for visual control.

For the heat treatment of different fruits (apple, pear, blackberry, strawberry, blueberry, elderberry, currant, carrot, herbs, quince, beetroot, sea buckthorn, rowan berries, onion) suitable electric pasteurizer. Temperature checks at two points, in the heat exchanger and once on the outlet. The machine automatically controls the heat exchanger temperature. It is fully automatic. If the temperature of the juice to be pasteurized falls below the desired temperature, the output side of the machine is disabled and the juice circulates in the by-pass system until the temperature reaches the set level. The machine then starts charging again. At the end of the work, the tube spiral can be cleaned very easily with the help of a sponge ball. It requires minimal maintenance.Specifications:-Performance: 300 L/h (From 20°C to 80°C)-Electric demands: 28 kW, 400 V, 32 A, triphase-Material: WNr. 1.4301, AISI 304 stainless steel-Dimensions: 1480x1120x1940 mm-Weight: 230 kgSize: Length: 1539 mm, Width:    642 mm, Height:  1850 mm-IP65 certified electronics-Heat exchanger: soft water-Connections: DN 25-Level indicators for water and juice-Thermometers: 2 pcs-Automatic heat control, very easy to clean. Automatic operation – flowthrough type.-Requires minimal maintenance.Options:-Available options:-BiB OR bottle filler modules-Manual BiB filler with digital scale OR two head bottle filler moduleAccessories:  - Sponge balls for cleaning