Filling equipment and accessories

Vertical tea bag packing machine from Kolman. In the set: 1. Kolpak 2LT (One-line packing device can pack heat-welded pyramid packs, sticks and 3-connection packs). Technical data: Power supply 220V/50Hz/1300W, Weight 150-300 kg depending on the model, 3-sided bag formulation, Dimensions 1750 x 1750 x 900 mm, productivity 1-formulator 4000 cycles/h (up to 4-formulator can be added), bag lengths 40-150mm, bag widths 10-40mm.

The bottling machine is ideal for smaller (craft) beer, soft drink, cider, wine and water producers. Available in 4, 6 and 8 head versions. The machines are suitable for filling both glass and PET bottles from 200 ml to 2 liters. The device automatically bottles a pre-calibrated amount into the bottle using the bottling nozzle. Extras: Carbonizers, cappers, coolers, labeling machine and various bottle rinsing, pasteurizing and washing machines..

Italian quality product from a company with over 20 years of experience. EnolMaster is a self-priming bottling device for small producers. Suitable bottle opening 16-28mm and height 180-330mm. Productivity: up to 600 bottles/hour. Special pyrex glass overflow container. Bottling nozzles can be calibrated..

The bottling device with self-priming pump, timer and foot switch is convenient and efficient. Can be used to fill a variety of liquid liquids, including water, shampoo, liquid cream, etc. Silicone hoses. Stainless steel housing, pump and motor made of anti-corrosion materials are separated from each other. The stainless steel body is rust and shatter resistant. The waiting time between the bottling time and the automatic bottling cycle can be adjusted on the screen display of the bottle filling machine. With automatic counting function. You can choose between manual and automatic mode. The 8mm bottling nozzle is drip-free and has high filling accuracy. Intake filter mesh (for filtering) included. bottling nozzles work with a regulated filling speed. Efficient and high performance accuracy. The liquid filling machine has a foot switch to control the process. The device with self-priming function and foot switch is convenient to use. Technical information: Voltage: 220V/50W, Filling volume range: 5ml-3500ml, bottling accuracy <0.5%, Maximum flow rate: 3.2L/min (depends on product and employee), Maximum suction distance: 2 m. Country of manufacture: China..

The bottling machine is ideal for smaller (craft) beer, soft drink, cider, wine and water producers. Available in 4, 6 and 8 head versions. The machines are suitable for filling both glass and PET bottles from 200 ml to 2 liters. The device automatically bottles a pre-calibrated amount into the bottle using the bottling nozzle. Extras: Carbonizers, cappers, coolers, labeling machine and various bottle rinsing, pasteurizing and washing machines..

The bottling machine is ideal for smaller (craft) beer, soft drink, cider, wine and water producers. Available in 4, 6 and 8 head versions. The machines are suitable for filling both glass and PET bottles from 200 ml to 2 liters. The device automatically bottles a pre-calibrated amount into the bottle using the bottling nozzle. Extras: Carbonizers, cappers, coolers, labeling machine and various bottle rinsing, pasteurizing and washing machines..

The swing-top nozzle of the isobaric small bottling wire bottle bottling using the counter-pressure method.

Semi-automatic bottler for canisters and containers The set includes a volumetric pump EURO-20, a stainless steel non-return valve, a stainless steel accumulation tank and an automatic pressure switch. Sede must be connected directly to the tank hose or fitting and ensuring constant pressure with a maximum distance of 20m and up to 10m in height. With the help of the adjustable pressure valve in the set, it is possible to ensure a suitable pressure for filling containers, canisters and small bottles. Appropriate safety valves allow air to be removed from the piping (avoid the foam problem from rapid bottling by adjusting the pressure). Fits approx. for filling 5l containers. If you also want to fill a smaller tare, the pump must be equipped with a speed regulator (accessory). Add-ons/kit change: Viscous liquid meter ENO400, stainless bottling gun, add-on for bottling in juice storage bags with manual cap closure..

Fully automatic bottling device with productivity 5l bags 450pcs/h, 10l 300pcs/h, 20l 200pcs/h. Dimensions 1700x1400x2100mm. Weight 300 kg..

Automatic valve removal, bottling and valve installation. Possibility of vertical bags (pouch-up) min. 1 l. Productivity 3l 380pcs, 5l 240pcs/h, 10l 210pcs and 20l 140pcs. Dimensions 800x1000x1500mm, weight 110kg. Control with touch screen PLC SIEMENS, multi-language and multi-program, Induction flow meter, Vacuum system and nitrogen injection, Automatic opening / closing of bags in Vitop standard set, Volumetric pump with self-cleaning rubber wheel impeller 900 rpm with bypass and total drain valve, Vacuum-proof filling system, Possibility to fill flexible bags or bag ( higher type) since then, min. bottling with 1L capacity, 4-wheel stainless steel frame, Inox fitting for CIP cleaning, automatic cleaning program, Safety guard, Adjustable stainless support when filling boxes. Max. bottling temperature +90C. Bottling capacity up to 4500l/h. Induction meter accuracy class 0.2% and disinfection up to +120C. It is possible to save 10 different programs when bottling pre-calibrated liquids, which means that once a liquid/program has already been calibrated and saved, it is not necessary to perform a new calibration, but to retrieve the corresponding program from the memory Extras: electronic bottling speed control, intermediate tank with automation, compressed air compressor, automatic additional tool for special bag for caps, oil bottling accessories, filter 10" or 30", air filter..

Easy filling: Our automatic weighing filling packaging machine processes particles up to Φ<10mm, and that's not all! It effortlessly bottles everything from spice powders to tea leaves to grains. Precise Filling: With its built-in two-stage vibration motor, our particle filling machine ensures an accuracy of ±1g. Easily bottle anything from 1g to 100g. Compared to single vibration motors, our double vibration motor ensures better discharge and avoids residue inside. Smart Control: Take control effortlessly! The automatic powder filling machine has a smart control panel that allows you to easily adjust filling weights and speeds for different materials. It is multifunctional and very easy to use. Sensitive Sensing: No more manual effort! The outlet port of our powder packaging machine has an intelligent infrared sensor function that automatically detects when to dispense without the need for switches. Robustly built for long-lasting use: Our powder filling machine is made entirely of stainless steel and has important components (hopper/vibration trough/weighing hopper/discharge port) made of food-grade 304 material. It ensures reliable performance and safety with every filling.

Stainless bottling gun for filling storage bags. We recommend purchasing an additional pump, overpressure switch and scale when building a complete and simple bottling solution. If you want to bottle hot liquid, then the possibility to insulate the handle of the gun..

With the juice storage bag holder, filling the storage bag is very convenient and easy. 1. Remove the valve from the bag 2. Place the mouth of the bag between the holder 3. Fill the bag with juice 4. Install the valve. Made of stainless steel..

With the juice storage bag holder, filling the storage bag is very convenient and easy, because the holder is quite large and strong. 1. Remove the valve from the bag 2. Place the mouth of the bag between the holder 3. Fill the bag with juice 4. Install the valve. The height of the holder or bottling can be adjusted by bending the metal up/down. Standard bottling height 115mm. Made of stainless steel..

Bag-in-box tap connector (1 piece). The bag-in-box tap connector is ideal for creating a quick and reliable connection to Vitop® taps in bag-in-boxes. Installation is very simple, simply insert the hose onto the hose connector, then insert the tap into the connector and close it by pulling back the top of the connector. To release the liquid, turn the upper knob of the connector clockwise. The cleaning system is also very simple. Just unscrew the hose connector and pull out the spring-loaded valve. The connector can be used both for spraying liquid by gravity and by pump distribution systems. This feature makes it suitable for both home and business use. Features: Connector material: Polypropylene (PP). Valve material: Polyethylene (LDPE). Spring material: Stainless steel. Indicative colours: Black - White. (This product will be shipped in the available colour). Packaging: 1 piece.

High-quality and semi-automatic bottler for juice storage bags. Productivity 180l/h, dimensions 760x620x580mm, weight 30kg.

High-quality and semi-automatic bottler for juice storage bags. Productivity 420l/h, dimensions 1030 x 1650 x 800 mm, weight 140kg.

• Output height up to 2.0 meters • Suitable for transporting small fragile products • "Z" shape • Usable loading area 388mm • Belts on bearings • Antistatic food polyurethane tape SPONDAFLEX • Variable speed motor 0.37kW • Reverse at slow speed - for easy cleaning of the tape • Photo eye for product quantity for identification in the weighing dispenser container • 4 - adjustable legs • CEE control center and drawings • Weight: 130Kg.

The high-quality CE-certified doser DOSELITE, made in Italy, allows you to dose volumes of 20-700ml. It is possible to dose various viscous and hot puree-like raw materials. SET: adjustable dosing flask 20-700ml + 3D valve (viscous liquid) + stainless bottling nozzle Ø20/25mm and 15l raw material funnel (the price of the funnel is added to the product cost). DESCRIPTION OF THE WORKING PROCESS: Connect the hose and place the liquid (if it is very viscous, we recommend using a funnel that is filled with the raw material), when you press the button, the device creates a negative pressure and sucks the liquid into the flask, and then the liquid is forced out of the measuring flask through the outlet nozzle with the help of compressed air. A hand crank is installed on the rear side of the product, which determines the exact volume of the dosing or piston. All seals are made of materials that comply with food standards, and the rest of the material that comes into contact with the substance to be bottled is made of stainless steel. When cleaning the bottling device, it is not necessary to have special tools - everything opens easily and quickly. The flow and speed of the substance to be bottled can be adjusted with 2 air pressure regulators. Warranty 12 months. The working process of the product requires a 6bar compressed air compressor, preferably with a 50-100L hydrophore, which is not included in the product price..

The high-quality CE-certified DOSELITE dispenser made in Italy allows dosing of 5-250ml volumes. It is possible to dose oil, creams and various viscous and less viscous liquids such as honey. KIT: dosing device 5-250ml + 3D valve + stainless steel bottling nozzle Ø20/25mm (stainless funnel of suitable size is added to the product price). DESCRIPTION OF THE WORKING PROCESS: When filling the funnel of the device, the product to be dosed pours into the measuring chamber, and when the specified dose is reached, the product is pushed out of the output nozzle with compressed air. A hand crank is installed on the back side of the product, which determines the exact volume of dosing. All seals are made of materials that comply with food standards, and the rest of the material that comes into contact with the substance to be bottled is made of stainless steel. When cleaning the bottling device, it is not necessary to have special tools - everything is easy and fast. The flow and speed of the substance to be bottled can be adjusted with 2 air pressure regulators. Warranty 12 months. The working process of the product requires a 6bar compressed air compressor, preferably with a 50-100L hydrophore, which is not included in the product price (orient.market price 150EUR+km). WORKING PROCESS: 1. Fill the 30L funnel and connect the device to the electrical network 2. Set the bottling volume using the hand crank on the back of the device 3. Place the tare under the bottling nozzle and press the ON button.

The high-quality CE-certified DOSELITE dispenser made in Italy allows dispensing volumes of 5-380ml. It is possible to dose oil and various liquids. KIT: adjustable dosing flask 5-380ml + 3D valve (viscous liquid) + stainless bottling nozzle Ø20/25mm and raw material funnel are added to the product price. DESCRIPTION OF THE WORKING PROCESS: Connect the hose and place the liquid (if it is very viscous, we recommend using a funnel that is filled with the raw material), when you press the button, the device creates a negative pressure and sucks the liquid into the flask, and then the liquid is forced out of the measuring flask through the outlet nozzle with the help of compressed air. A hand crank is installed on the rear side of the product, which determines the exact volume of the dosing or piston. All seals are made of materials that comply with food standards, and the rest of the material that comes into contact with the substance to be bottled is made of stainless steel. When cleaning the bottling device, it is not necessary to have special tools - everything opens easily and quickly. The flow and speed of the substance to be bottled can be adjusted with 2 air pressure regulators. Warranty 12 months. The working process of the product requires a 6bar compressed air compressor, preferably with a 50-100L hydrophore, which is not included in the product price..

.

Connects with a thread directly to the CO2 inlet of the KEG to measure the CO2 pressure in the tank. Fits 18.9L keg with thread. If necessary, the valve can be opened to reduce the pressure. Manometer 0.69...4bar..

Pressure control kit with integrated manometer and valve. Ideal for controlling the pressure in the pressure vessel or for carrying out the fermentation process in a light pressure environment, the so-called using as an air lock. An adjustable screw on the side allows you to increase and decrease the exact set pressure. With a screwdriver, you can easily disassemble the BlowTie assembly for thorough cleaning. Specification: suitable for pressure 0-15 psi (0 to 1 bar), made of food grade polyacetal (POM: polyoxymethylene), stainless steel screws, 8mm pipe (5/16") quick connection on both sides.

The essential accessory for filling bottles - fills your beer-wine bottle from the bottom to the top without oxidation or excessive foaming. The filling of the bottle stops automatically when the valve is raised or the bottle is removed. Suitable for a plastic valve with a return nut or a PVC pipe Ø 10 mm..

A simple and primitive bottle opener for 4 bottles. Stainless nozzles and inlet pipe with float with sanitary plastic tub. Suitable for bottles 0.375 - 2l. Suitable for bottling wine, juice and also beer. The bottling level can be adjusted using the bottling end seals..

The perfect siphon! Don't waste your time with too small a siphon - use Brewferm Flow'in. The siphon has a fixing clip to determine the correct height and secure it securely. The siphon also has a sediment filter with a non-return valve to remove unwanted particles. Specifications: Anti-drip set, automatic flow, clamp for stable installation and height adjustment, sediment filter, bottle filler, Material: PVC, Food grade, length 63.5cm..

The perfect siphon! Don't waste your time with too small a siphon - use Brewferm Flow'in. The siphon has a fixing clip to determine the correct height and secure it securely. The siphon also has a sediment filter with a non-return valve to remove unwanted particles. Specifications: Anti-drip set, automatic flow, clamp for stable installation and height adjustment, sediment filter, bottle filler, Material: PVC, Food grade, length 34.5cm, diameter 25mm.

CO2 mini-balloons 10pcs 16g, without boiling. Especially for Party Star, Party Master and other beer taps with cylinder holder. Dimensions: diagonal 22mm and height 89mm

Mini CO2 cylinder holder for 18.9L KEG pressure tank with 1/4 thread. The set includes a CO2 mini-balloon 1pc. Compatible with white ball-lock quick coupling with 1/4 thread (purchase separately)..

Coravin Pure™ Capsules are designed to power your Coravin Timeless Six+ wine preservation and pouring system. Filled with 100% pure argon gas, these capsules pressurize the bottle, allowing wine to flow smoothly through the spout for an optimal pour (150 ml per glass). Once the system is removed, the capsules protect the remaining wine from oxidation, keeping it fresh and intact for weeks, months, or even years. Each Coravin Pure™ Capsule is designed to pour up to 15 glasses of 150 ml of wine using the Coravin Timeless Six+ system. Argon gas, being an inert and non-reactive gas, creates a protective barrier against oxidation, ensuring that the taste, aromas, and freshness of the wine remain intact as if the bottle had just been opened, even after extended storage periods. To replace the capsule, slide the Smart Clamp™ to release it and unscrew the capsule chamber. Insert a new Coravin Pure™ capsule into the chamber and screw it back tightly, ensuring there’s no gap. Reposition the SmartClamp™ and your system is ready to use! Technical specifications: Dimensions: Ø2.21 x 9.14 cm, Gas Volume: 21 ml of 100% pure argon gas. Note: Coravin system not included.

CO2 mini-balloons 10 pcs 8g, without boiling. Suitable for e.g. for ukeg 1.9l model and other devices supporting 8g cylinder. Dimensions: diagonal 18mm and height 65mm

CO2 mini-balloons 10pcs 16g, thread E290 for KEG holder (accessory) Dimensions: diagonal 22mm and height 89mm

Dispenser made in Italy for dispensing CO2 into the bottle before bottling. Technical data: Made of stainless steel AISI 304 / Size of the nozzles 10mm / Different amount of CO2 input can be set for both bottles / Diameter of suitable bottles up to 112mm and height up to 375mm / Electrical connection 230V / Weight 48kg / Dimensions 1440x520mm.

Filled CO2 cylinder (min.50bar). Size 2L/1.5kg; pressure max. 150 bar. dimensions ø100 x 435, weight 5kg. The cylinder and valve are manufactured according to EN 1964: 1999 and are π-marked for ADR / RID compliance. Balloons can be filled/sent to our address in Pärnu. Also buy a CO2 reducer.

Filled CO2 cylinder (min. 50bar). Size 8L/6kg; pressure max. 200 bar; dimensions 136x820mm, weight 16.5kg. A reducer with an input thread of 21.8mm is suitable. Keere The protective cover protects the valve from damage during transport or storage. The cylinder and valve are manufactured according to EN 1964: 1999 and are π-marked for ADR / RID compliance. Balloons can be filled at our Pärnu unit. Also buy a CO2 reducer.

High-quality and semi-automatic bottling device for bottling juice storage bags and bottles. Fully automatic bottling cycle (bags): vacuum->filling->closing->+CO2. Productivity; 3L - 350 pcs/h; 5L-300pcs/h; 10L-180pcs/h; 20L-130pcs/h; Accuracy +/- 5cl. Power: 1.1kw + 1.5kw (220V or 380V). Air pressure: 6bar; CO2 pressure: 1bar; Dimensions: 60x82x150cm; Weight: 70kg. Made in Italy. Included: PLC panel control with touch screen and multilingual program / Electromagnetic gauge-sensor (Burkert type), for cold liquid (such as wine / water) / vacuum system and nitrogen system / automatic piston to block the filling head / pump HP 1.5 with bypass capacity 4500lt /h / double start switch / bottler, setting range from 1l to 30 liters / semi-automatic handle for opening/closing the filling head with adjustable height / selection of open and close taps. VITOP standard (other on request) / stainless steel work table with 4 wheels / device cleaning fittings (CIP) / Automatic cleaning program / non-return valve in the pump system / connecting pipes and fittings (triclamp 1.5"). On the other side of the device, bottle bottling nozzles 4pcs with adjustable level. Extras : stainless control panel, CO2 pressure reduction valve, oil bottling accessory, bottling speed control, filters, pouch-up bag bottling, bag->box mounting accessory..

Tenco bottler spare part.

Vasturõhuvillija NukaTap, pudelitele. See käepärane vasturõhuvillija on kasulik tööriist erinevate suurustega pudelite täitmiseks. Sobib standardsetele õllekraanidele ning on suurepärane viis villida mõned pudelid võistlustele või pakendada õlu pudelitesse. Teleskoopilise torustiku saab lihtsasti eemaldada puhastamiseks! NukaTap vasturõhuvillija võimaldab täita pudeleid otse kraanidest, säilitades vaadistatud õlle maitse, aroomi ja karboniseerumistaseme. See on täielikult valmistatud roostevabast terasest, ilma alumiiniumi või vasest komponentideta. Tänu sellele saate kasutada seadme puhastamiseks erinevaid kemikaale, ilma et riskiksite seadme või lisatarvikute kahjustamisega. Seade on väga kompaktne ja sobib igale kraanile, mille tila/otsaku siseläbimõõt on 10,0 mm või millel on 3/8" üldkeere. Pakume ka muid lisatarvikuid, et saaksite ühendada õllevooliku selle seadmega teiste villimismeetodite jaoks. Kasutamiseks ühendage lihtsalt CO2 gaasivoolik villijaga ja olete valmis alustama. Integreeritud vasturõhu kaitseklapp annab teile hea kontrolli vasturõhu ja seeläbi täitmiskiiruse üle. Kui kiiresti saab pudelit täita ilma liigse vahutamiseta, sõltub CO2 tasemest, õlle temperatuurist ja pudeli temperatuurist. Seda ei saa kasutada ventilatsiooniavaga kraanidega, kuid sobib peaaegu kõigi turul olevate ettepoole tihenditega kraanidega, nagu NukaTap SS, NukaTap FC, Perlick ja teised kaubamärgid. Komplekt sisaldab laia valikut lisatarvikuid, sealhulgas karboniseerimiskorki, mis võimaldab kiiresti lahti ühendada õllevooliku, duotight-liitmikke, millega saate ühendada õllevooliku seadmega, ja muid kasulikke liitmikke, mida võite vajada. Vasturõhuvillija töötab rõhuerinevuse põhimõttel - pudel täidetakse esialgu CO2-ga sama rõhuni kui vaadis, seejärel lastakse õllel voolata pudelisse ilma, et see kaotaks oma karbonisatsiooni, kuna rõhk pudelis ja vaadis on tasakaalustatud.

Nitrous oxide cylinders are suitable for UKeg™. Each cylinder contains 8g of food-safe N2O gas. Dimensions: diagonal 18mm and height 65mm Nitrous oxide, or laughing gas, is a chemical compound that is a colorless, non-flammable gas at room temperature, with a pleasant, slightly sweet smell and taste. It is used in medicine as an anesthetic and pain reliever, and the gas produces a sense of well-being and euphoria.

Stainless bottling device for 4 bottles. Made in Italy. Bottling nozzles 15mm; adjustment of the amount of liquid on the bottle tips; stainless drain valve; productivity 700l/h; Size: 580x1070x500 mm; Weight 38 kg. Additional equipment: mechanical or electronic volume sensor, pump, electronic input valve, foam reduction valve (e.g. when bottling beer), bottling nozzles 17mm..

A simple and manual bottling device that can bottle up to 1600l/h. Made in Italy. In the set: digital gauge, stainless frame, pump 330W, strong PVC bottling gun, PVC tube. Dimensions: 220x300x600mm; Weight: 15kg. ACCESSORIES: Juice storage bag closing aid (pictured - on the back of the frame) / Stainless bottling gun / Oil bottling accessories.

Automatic dispenser with pump, pressure switch, inox storage unit and support frame and Digital flow meter ENO 24 for wine, juice.• Volumetric pump EURO 20 with rubber impeller , • Fitting DIN 20/25, • Cable for electricity 220V 50hz singlephase, • Stainless steel support without wheels, • Stainless steel pressure tank, with no-foam valve, • Automatic pressure switch, • One way inox valve, • Rubber pipe. Power 0,37kw 220V, max. filling rate 1000l/h,  dimensions 240x300x430mm, weight 20kg.Optional: Digital flow meter ENO 400 for oil and viscous juice, Inox trolley (not compatible with cod.9024), KIT for filling bag in box, with manual closing system.

simple dispenser-pump that allows you to automatically set the desired amount (0.25-5l) and dose viscous liquids such as oil, preheated honey directly into the tare. productivity 50-600l/h. The device can also be used as a pump. Made in Italy. Accessories: feed hopper for raw materials..

A simple dispenser-pump that allows you to automatically set the desired amount (0.25-5l) and dose viscous liquids such as oil, preheated honey directly into the tare. productivity 350-3600l/h. The device can also be used as a pump. Made in Italy..

Gun dispenser for dispensing liquid into a bottle..

Gun dispenser for dispensing liquid into a bottle..

Dispenser made in Italy, suitable for bottling liquid or viscous raw materials. The device with easy-to-open and close clamps is easy to maintain and clean. Dispenser: 2-100ml (plunger size adjustable with crank), container 15l, viscous raw material. Works with compressed air. Max. working temperature +50C. Extras: Working temperature +90C..

Compact dispenser with a 50l mixing container, which has a mixing mixer inside. The device must be placed on top of an existing table. The structure of the dispenser is completely made of stainless steel AISI 304. The base is equipped with all the controls for the suction and dispensing devices, an emergency button, an air inlet and a lubricant reducer filter. The container is placed on a support plate with adjustable height and depth to enable dosing into containers with the following dimensions: D.min 15mm - D.max 120mm; H.min 10mm - H.max 210mm. The start of the dosing cycle is given by the operator using the 2M foot pedal. Rinse cycle: the switch activates the repetition of strokes. The machine continues to dispense doses until the button is turned off: this feature is useful for rinsing the machine after filling. The machine works with 6 bar compressed air. DOSER 5-250ML The volume dispenser is completely made of stainless steel AISI 316. The amount of dosing can be adjusted between 5ml and 250ml using the hand wheel behind the dispenser. All sealants used meet nutrient exposure standards. The dispenser is equipped with Tri Clamp connections to facilitate disassembly and cleaning of all parts in contact with the product. 3D FLAP VALVE Three-way conical rotary valve Mignon, completely made of stainless steel. Conical shutter made of anti-friction and FDA-approved plastic material, suitable for contact with the product being handled at temperatures up to 50°C. All Tri Clamp connections to facilitate disassembly and cleaning of all parts in contact with the product. Insertion 10x20mm is suitable for passing dense products with small pieces. STANDARD OUTPUT NOZZLE 1 "standard nozzle, made of stainless steel. Available in different formats according to the dimensions of the container. CONICAL CONTAINER WITH MIXER STRIP Conical 50l container with mixer (horizontal in the picture) is included in the set. Made entirely of stainless steel and attached to the general frame. The lid of the container is made of transparent polycarbonate. and consists of two parts - one part closed and the other openable.The hopper is equipped with a safety switch.Stainless steel mixing paddles ensure uniform mixing of the product and prevent lumps from settling.Electrical cabinet with start/stop device and potentiometer to adjust the speed of the mixer..

Dispenser made in Italy, suitable for bottling liquid or viscous raw materials. The device with easy-to-open and close clamps is easy to maintain and clean. Dispensers: 1-18ml; 1-38ml, 2-48ml, 2-100ml, 5-250ml, 5-385ml, 20-700ml, 50-1500ml, 50-2200ml, 200-5600ml. price calculated: dispenser 5-385ml, container 15l, viscous liquid temp. max. +50C.

Doselite bottling nozzle for viscous substance..

The liquid to be dosed is poured into the container. If necessary, the manufacturer has larger models available: 6L, 15L or 30L..

The high-quality CE-certified doser DOSELITE, made in Italy, allows you to dose volumes of 5-1300ml. It is possible to dose various viscous substances with a flowing nature. SET: adjustable dosing flask 5-1300ml + 3D valve (viscous liquid) + stainless bottling nozzle Ø25mm. DESCRIPTION OF THE WORKING PROCESS: Connect the raw material with a hose and the raw material must be poured into the device by itself (if it is very viscous, we recommend using a funnel that is filled with the raw material), when you press the button, the device creates a negative pressure and sucks the raw material into the piston, and then it is pushed out from the measuring piston through the outlet nozzle using compressed air . A hand crank is installed on the rear side of the product, which determines the exact volume of the dosing or piston. All seals are made of materials that comply with food standards, and the rest of the material that comes into contact with the substance to be bottled is made of stainless steel. When cleaning the bottling device, it is not necessary to have special tools - everything opens easily and quickly. The flow and speed of the substance to be bottled can be adjusted with 2 air pressure regulators. Warranty 12 months. The working process of the product requires a 6bar compressed air compressor, preferably with a 50-100L hydrophore, which is not included in the product price..

High-quality and automatic dispenser-bottle from an Italian manufacturer. Dosage: 5 - 1000ml; Electric power: 1.2kw; Dimensions: 600x600x1600mm; Weight: 110kg • Stainless steel construction with 4 wheels, • PLC system with self-learning system, • N.10 preset memory for filling tare with different volume, • Touch screen, • Self-priming stainless steel pump with magnetic drive • Electronic speed variator with SLOW function, • Automatic / manual filling possibility, • Pedal filling control, • Filling level height adjustment, • Accuracy + 1 gr.

Doselite dispenser has a stainless device that allows you to bottle liquid into doy-pack bags and close the valve. Range of dispensers (specify when ordering) 5-260ml / 20-680ml (extra +550eur) / 50-1300ml (extra +750eur). Enables bottling liquid and more viscous liquids with lumps at temperatures up to +100C. Operating operations: the operator places the bag into the slot of the device, then mechanically removes the valve using the lever of the device, at the same time the bottling tip is placed into the bag. It is possible to adjust the bottling speed and quantity. After the bag is filled, it is possible to remove excess air from the bag using a vacuum and close the valve mechanically using a lever. Working pressure 2-6bar. Extras: bottling dispensers 20-680ml (extra +550eur) / 50-1300ml (extra +750eur); conical raw material containers 15l (+600eur) and 30l (+750eur)..

Regulator-reducer for two different output CO2 cylinders with variable output pressure regulation. Enables lowering the pressure of the gases leaving the cylinder to the required working level pressure and ensures that the pressure is kept automatically and as constant as possible - regardless of changes in the inlet pressure. The regulator is equipped with a safety valve. One monometer indicates the level of compressed air in the CO2 cylinder and the other in the output piping. The pressures of the output pipelines are separately adjustable. Technical data: input thread W21.8x1 1 14 (connection to cylinder). Buy more hose connectors if necessary..

Pressure control kit with integrated manometer and valve. Ideal for controlling the pressure in the pressure vessel or for carrying out the fermentation process in a light pressure environment, the so-called using as an air lock. An adjustable screw on the side allows you to increase and decrease the exact set pressure. With a screwdriver, you can easily disassemble the BlowTie assembly for thorough cleaning. Specification: suitable for pressure 0-15 psi (0 to 1 bar), made of food grade polyacetal (POM: polyoxymethylene), stainless steel screws, 8mm pipe (5/16") quick connection on both sides.

Simple and convenient gas system sharing. Not suitable for liquids. The adapter is pressure-resistant up to 6.5 bar..

• 1 dispenser and scale • 1 scale with 50 different programs • 1 stainless steel dispenser-basket • 4 independent vibrating channels (2 full load for larger particles + 2 for small particles) • 1 stainless steel filling container • 2 photo eyes to prevent products from sticking • 1 stainless steel outlet pipe Ø110mm • 1 adjustable raw material dosing valve (accessory) • 1 dosing pedal made of yellow PVC safety belt • 1 support structure of piping 50x50x2 + 4-turn brake wheel • Manual adjustment of package height up/down and forward/backward • CEE control center and drawings • Weight: 190 kg..

Italian quality product from a company with over 20 years of experience. EnolMaster is a self-priming bottling device for small producers. Suitable bottle opening 16-28mm and height 180-330mm. Productivity: up to 400...600 bottles/hour. Special pyrex glass overflow container. Bottling nozzles can be calibrated. Designed for bottling liquids with more viscous or smaller pieces..