Distillers

High-quality copper and handcrafted distiller from a Portuguese manufacturer. Container 3l, dimensions 53x48x18cm, copper thickness 1.0mm, weight 3kg, with thermometer. PS Dimensions and weight may differ from those indicated above, as it is a handmade product.

Prismatic copper springs with a volume of 0.5 l, ideal for filling distillation columns. Parameters of copper prism springs: wire with a diameter of 0.40 mm, spring diameter 4-5 mm, spring length 4 - 6 mm. The prism springs filling the ratification column are the most efficient, with the best surface-to-volume ratio. The purpose of filling is to maximize the heat exchange surface from the boiler to the evaporator. To obtain a distillate with a power of 93%, 6 to 8 theoretical layers should be used (the height of one layer is about 2 cm). However, it should be remembered that in addition to strength, the purity of the distillate is also important, e.g. properties of yeast and other organic raw materials. The more layers, the purer the final distillate. It is assumed that the column must have at least 40 theoretical layers to obtain a relatively pure distillate. Wash the copper springs before filling the column for the first time. According to Estonian laws, the distiller may not be used for the production of alcohol. Use of the distiller for such production is at your own risk..

Efficient Water Purification: The 750W heating element enables our water distiller for home use to produce up to 1L (0.3 gal.) per hour and about 24L per day. It can effectively dissolve solids, VOCs and other contaminants, providing you with pure distilled water for convenient drinking. Besides distilling water, it can also be used to make alcohol and essential oils. Perfect for offices, homes, laboratories, dental clinics, etc.Precise Temperature Display: Our tabletop water distiller is equipped with an intuitive control panel that displays the set temperature, which ranges from 30℃ to 108℃, allowing you to better control the distillation process. Besides, thanks to the dry-burn protection, it will stop heating when the temperature exceeds 115℃ and automatically shut off when it is over 150℃.Improved Timing Function: In addition to the conventional functions described above, our distilled water purifier provides a timing function. The time range from 0 to 99 hours is ideal for constant temperature fermentation and perfectly meets your needs for making alcohol, essential oils and hydrolat. In addition, it is recommended to set 3.5 hours when distilling 4L (1.1 gal) of water. In this way, some water will remain at the bottom at the end of distillation, which can effectively reduce scale deposits.Selected Materials & Fast Heat Dissipation: All parts that come into contact with water are made of food grade 304 stainless steel, including the inner tank, inner cap and water outlet. The 3.9 L (1.03 gal.) glass carafe with silicone buffer will not break or crack easily. It can store the distilled water longer than those plastic bottles. A built-in 4-blade aluminum fan as well as the SUS 304 condensing coil are durable enough to ensure fast heat dissipation and longer service life.User-friendly accessories: In order to give you a better using experience, we kindly offer a bottle of cleaning powder and 3 replaceable carbon packs. The cleaning powder can be used to clean the inner tank easily. The limescale deposits can be minimized if you leave some water at the bottom at the end of each distillation. By installing the carbon pack at the water outlet, the distilled water can be further purified and its taste can be adjusted.Technical info: 750W/220V, temperature +30…+108C, tank 4l, production 1l/h, material: stainless steel AISI304, weight 3,58kg, measurements 235 x 385mm

Prismatic copper springs with a volume of 0.25 l, ideal for filling distillation columns. Parameters of copper prism springs: wire with a diameter of 0.30 mm, spring diameter 4-5 mm, spring length 4 - 6 mm. The prism springs filling the ratification column are the most efficient, with the best surface-to-volume ratio. The purpose of filling is to maximize the heat exchange surface from the boiler to the evaporator. To obtain a distillate with a power of 93%, 6 to 8 theoretical layers should be used (the height of one layer is about 2 cm). However, it should be remembered that in addition to strength, the purity of the distillate is also important, e.g. properties of yeast and other organic raw materials. The more layers, the purer the final distillate. It is assumed that the column must have at least 40 theoretical layers to obtain a relatively pure distillate. Wash the copper springs before filling the column for the first time. According to Estonian laws, the distiller may not be used for the production of alcohol. Use of the distiller for such production is at your own risk..

High-quality copper and handcrafted distiller from a Portuguese manufacturer. Container 5l, dimensions 45x48x23cm, copper thickness 1.1mm, weight 3kg. PS Dimensions and weight may differ from those indicated, as it is a handmade product.

30 L stainless steel still and fermentation pot - two in one. The product is made of high-quality and hygienic stainless steel, which is welded with argon. A large 30L capacity fermenter and advanced cooling equipment ensure excellent product distillation performance. Thanks to its special features and convenience, it is used both in small businesses and in households. The column of the device is equipped with ceramic balls, which ensure the purity of the raw material. External condensation and condensation in the tube can be done simultaneously, ensuring a better cooling effect, while the built-in spiral tube has a larger contact surface with the cooling water. An additional circulation pump is provided to ensure accelerated water flow in the condensate circuit. Flowing water enters through the lower inlet and exits through the upper outlet. You can monitor the temperature in real time with the included thermometer. Gauze bags, a rack and an airlock save a lot of trouble in the fermentation process. And a breathalyzer kit is included. Possibility to use the pot on a ceramic, wood stove, gas, etc. on the heater. Technical information: Fermenter volume: 30 L, Fermenter size: Φ 350 x 350 mm, Condensation pipe size: Φ 5.5 x 11.0 inches / Φ 140 x 280 mm, Input amount: about 7.5 kg of raw material, Steaming time: 1 -2 h (including heating time), Product weight: 6.4 kg. Country of manufacture: China..

High-quality copper and handcrafted distiller from a Portuguese manufacturer. Container 5l, dimensions 65x50x20cm, copper thickness 1.0mm, weight 4.5kg. PS Dimensions and weight may differ from those indicated above, as it is a handmade product.

High-quality copper and handcrafted distiller from a Portuguese manufacturer. Container 10l, dimensions 55x54x27cm, copper thickness 1.1mm, weight 4.5kg Ps. Dimensions and weight may differ from those indicated above, as it is a handmade product.

High-quality copper and handcrafted distiller from a Portuguese manufacturer. Container 20l, dimensions 65x51x31cm, copper thickness 1.2mm, weight 6.5kg Ps. Dimensions and weight may differ from those indicated above, as it is a handmade product..

High-quality copper and handcrafted still from a Portuguese manufacturer. Tank 40l, dimensions 70cm x 77cm x 40cm, copper thickness 1.3mm, weight 10.5kg Ps. Dimensions and weight may differ from those indicated above, as it is a handmade product..

High-quality stainless distillation-extractor 12L. Made in Italy. With the device, it is possible to produce various essential and vegetable oils very easily and quickly. Available in sizes 12 - 250L. The bottom of the unit is filled with water up to the grate and plant material is added and heated to boiling on a gas or electric stove. As a result of distillation, water vapor is released together with vegetable oils, which are captured in a glass flask, which in turn is cooled with water (the cooling process must start at approx. +50C). Since oil is lighter than water, oil and water separate from each other in the glass flask. The whole process takes approx. 60-70 min depending on the power of the heater. The devices can use fresh or dried plant material such as lavender, mint, rosemary, thyme, bay leaves, sage, oregano, chamomile, rose, eucalyptus, lemon balm, peppermint, wormwood, basil, verbena grass, cypress, mountain pines, helichrysum, geranium, eucalyptus, juniper, mastic, marjoram, parsley, rue, turpentine, valerian, etc..

High-quality copper and handcrafted distiller from a Portuguese manufacturer. Container 10l, dimensions 74x55x22cm, copper thickness 1.1mm, weight 8kg. Complete with a copper bottom grate and funnel, thermometer. PS Dimensions and weight may differ from those indicated above, as it is a handmade product.

High-quality stainless distillation-extractor 65L. Made in Italy. With the device, it is possible to produce various essential and vegetable oils very easily and quickly. Available in sizes 12 - 250L. The bottom of the unit is filled with water up to the grate and plant material is added and heated to boiling on a gas or electric stove. As a result of distillation, water vapor is released together with vegetable oils, which are captured in a glass flask, which in turn is cooled with water (the cooling process must start at approx. +50C). Since oil is lighter than water, oil and water separate from each other in the glass flask. The whole process takes approx. 60-70 min depending on the power of the heater. The devices can use fresh or dried plant material such as lavender, mint, rosemary, thyme, bay leaves, sage, oregano, chamomile, rose, eucalyptus, lemon balm, peppermint, wormwood, basil, verbena grass, cypress, mountain pines, helichrysum, geranium, eucalyptus, juniper, mastic, marjoram, parsley, rue, turpentine, valerian, etc..

Specially developed in Hungary for small producers. Stainless steel and durable. Precise heating system, cooling water regulation and simple distillation process. Adjusting the copper boiler plate for a fine aroma. Single-stage distillation is the pinnacle of the distillation method for alcohol, such as brandy, gin, whiskey, vodka. With an aroma and alcohol concentrator column built on the top of the boiler with a mixer, an average of 5-7% alc. guerilla. to obtain 75-85% of the middle distillate (useful fraction of the distillate) from the raw material. The final alcoholic beverages are free from interfering components that can cause off-flavors and aromas. It is not uncommon for distillation to start at 90% alcohol or more. Thanks to this modern purification technique, the distillate has a completely clear and light taste, which does not contain unpleasant elements of taste or aroma. It will charm you from the first taste! The final product does not contain strong pre- and post-distillation impurities. For more efficient use of the pot, proper control, a solid heat source, monitoring and adjustment points are built in. In addition, more than 300 copper catalysts are added to the upper edge of the column to ensure the perfect quality of the distillate. Technical data: size 95l, max. loading quantity 80l, min. loading quantity 40%, working process cold 2h (electricity), warm 1.5h (electricity), copper thickness 2mm, double walls and water jacket with safety valves, column 3'part stainless and with copper filling part, average ABV 80-85% and maximum 92% alcohol, cost per 1l (water, gas) 0.35...0.45eur/l. Designed for distilling the following products: whiskey, vodka, gin, beer, marmalade. Dimensions height 2340mm and diameter 1000mm..

High-quality copper and handcrafted distiller from a Portuguese manufacturer. Container 3l, dimensions 34x40x18cm, copper thickness 0.9mm, weight 1.5kg Ps. Dimensions and weight may differ from those indicated above, as it is a handmade product

Inside the boiler, a lower grate and an upper grate are standard equipment, which accommodate fresh raw materials to be distilled. Newly designed Florence vessel, optimized for the separation of essential oils from aromatic water with the possibility of aromatic water circulation in the distillation chamber. Quick and easy lid opening to optimize loading and unloading times. Available accessories: electronic condensate temperature control kit, steam distribution kit for use of an external steam generator, perforated baskets for easy and quick loading and unloading of raw materials, modular lift for loading and unloading baskets. Suitable for use on a propane/methane gas stove or external steam generator (not included). Boiler and lid are insulated to reduce condensation during operation. Condensation takes place via a shell and tube condenser with double temperature control to regulate the flow of condensation water. The essential oil is collected and separated directly into the Florence steel pot. The still is equipped with a lower and upper grate. To speed up loading and unloading, it is recommended to use baskets and a lift. Steam can be generated with a gas stove or externally produced steam. Using the WORKER extractor is very easy thanks to the quick opening of the lid using the handle. Loading can be done directly with the plant material in the boiler or with the help of loading baskets. Baskets are loaded using an electric lift. Baskets and lift can be supplied as additional equipment on request. Steam can be generated with a gas boiler or an external steam generator. In the latter case, it is necessary to turn on the steam diffuser in the extractor. Here are some herbs that can be distilled with an extractor: lavender, mint, rosemary, thyme, bay, sage, oregano, chamomile, rose, eucalyptus, lemon balm, herbs, wormwood, basil, lugia, cypress, rock pine, mugo pine, helichrysum , geranium, eucalyptus, juniper, mastic, marjoram, parsley, rue, turpentine, valerian, etc..

High-quality copper and handmade distiller from a Portuguese manufacturer. Tank 100l, dimensions 125x135x60cm, copper thickness 1.4mm, weight 35kg Ps. Dimensions and weight may differ from those indicated above, as it is a handmade product..

High-quality copper and handmade distiller from a Portuguese manufacturer. Tank 100l, dimensions 150x140x90cm, copper thickness 1.5mm, weight 58kg Ps. Dimensions and weight may differ from those indicated above, as it is a handmade product..

High-quality copper and handmade distiller from a Portuguese manufacturer. Container 40l, dimensions 110x110x58cm, copper thickness 1.4mm, weight 22kg Ps. Dimensions and weight may differ from those indicated above, as it is a handmade product..

High-quality copper and handcrafted still from a Portuguese manufacturer. The Premium Copper Flip Top Column Alembic includes a copper vessel with brazed composite construction, a rotating column attached to a pot with a metal support that can be used or tilted to the side if you want to use a traditional alembic, a swan neck lid, an extension tube and a serpentine coil condensing cooler. Tank 50l, dimensions 135x92x52cm, copper thickness 1.3mm, weight 28kg Ps. Dimensions and weight may differ from those indicated above, as it is a handmade product..

High-quality copper and handcrafted distiller from a Portuguese manufacturer. Tank 60l, dimensions 90x107x52cm, copper thickness 1.3mm, weight 22kg Ps. Dimensions and weight may differ from those indicated above, as it is a handmade product..

High-quality copper and handcrafted still from a Portuguese manufacturer. Tank 30l, dimensions 67cm x 60cm x 35cm, copper thickness 1.2mm, weight 8.5kg Ps. Dimensions and weight may differ from those indicated above, as it is a handmade product..

High-quality copper and handcrafted distiller from a Portuguese manufacturer. Container 30l, copper thickness 1.2mm. Complete with a copper bottom grate and funnel, thermometer. PS Dimensions and weight may differ from those indicated above, as it is a handmade product.

Essential Oil Extractor Distiller with stainless steel tanks.The essential oil extractor consists of a 75 liter heating tank, equipped with a removable internal filter; a lid with clamp closure, and a cooling tank with a capacity of 25 liters, equipped with tube and coil; the equipment also includes an analogue thermometer and an integrated safety valve. The operation of the essential oil extractor is simple:fill the tank with water up to the edge of the filter and insert the plants, compacting them to avoid spaces for steam outlet. Fill the cooling tank with cold water. Close the clamp cover and insert the pipe for the cooling circuit. Heat the water in the plant collection tank. Once the temperature of 100° C is reached, the steam begins to capture the essence contained in the plant; crossing the serpentine circuit it cools and physically separates from the essential oil. In the last phase, the essential oil extractor releases the finished product directly from the cooling tank pipette. After about an hour from the start of the extraction, check the quantity of essential oil coming out and, in case of absence, stop water heating.Heating tank features:Material: 18/10 AISI 304 stainless steel. Capacity: 75 L. Internal diameter: 400 mm. Height: 750 mm. Conical clamp closed lid. Analog thermometer. Safety guard. Bottom: flat, rounded and welded. Wall and bottom thickness: 1.2 mm. External tank finish: flower-patterned. Internal tank finish: Mirror polished. External tank welding finish: Satin.Cooling tank features:Material: 18/10 AISI 304 stainless steel. Capacity: 25 L. Internal diameter: 302 mm. Height: 365 mm. Wall thickness: 1 mm. Bottom thickness: 1.5 mm. Cooling coil. Handled. Water overflow pipettes. Mirror polished internal finishes. Flower-patterned external finish.Dimensions: 1160x450x870h mm.

High-quality copper and handcrafted distiller from a Portuguese manufacturer. Tank 150l, dimensions 140x180x86cm, copper thickness 1.4mm, weight 50kg Ps. Dimensions and weight may differ from those indicated above, as it is a handmade product..

High-quality copper and handmade distiller from a Portuguese manufacturer. Tank 200l, dimensions 155x176x91cm, copper thickness 1.4mm, weight 55kg Ps. Dimensions and weight may differ from those indicated above, as it is a handmade product..

High-quality copper and handcrafted distiller from a Portuguese manufacturer. Tank 300l, dimensions 185x195x110cm, copper thickness 1.6mm, weight 70kg Ps. Dimensions and weight may differ from those indicated above, as it is a handmade product..

Gas heating (120kw) water-jacketed distillation boiler with spherical tip. Stainless steel casing. Blender included. digital thermometer, viewing window DN100 and drain valve..

The essential oil extractor consists of a 120 liter heating tank, equipped with a removable internal filter; a lid with clamp closure, and a cooling tank with a capacity of 25 litres, equipped with tube and coil; the equipment also includes an analogue thermometer and an integrated safety valve. The operation of the essential oil extractor is simple: fill the tank with water up to the edge of the filter and insert the plants, compacting them to avoid spaces for steam outlet. Fill the cooling tank with cold water. Close the clamp cover and insert the pipe for the cooling circuit. Heat the water in the plant collection tank. Once reached the temperature of 100° C, the steam begins to capture the essence contained in the plant; crossing the serpentine circuit it cools and physically separates from the essential oil. In the last phase the essential oil extractor releases the finished product directly from the cooling tank pipette. After about an hour from the start of the extraction, check the quantity of essential oil coming out and, in case of absence, stop water heating. Heating tank features: Material: 18/10 AISI 304 stainless steel. Capacity: 120 L. Internal diameter: 500 mm. Height: 750 mm. Conical clamp closed lid. Analog thermometer. Safety valve. Bottom: flat, rounded and welded. Wall and bottom thickness: 1.2 mm. External tank finish: flower-patterned. Internal tank finish: Mirror polished. External tank welding finish: Satin. Cooling tank features: Material: 18/10 AISI 304 stainless steel. Capacity: 25 L. Internal diameter: 302 mm. Height: 365 mm. Wall thickness: 1 mm. Bottom thickness: 1.5 mm. Cooling coil. Handles. Water overflow pipette. Mirror polished internal finishes. Flower-patterned external finish. Dimensions: mm 1200x540x870h

Distillers with a capacity of up to 200 liters It is possible to order distillation devices of 100L, 150L, ​​​​170L and 200 liters. The device is self-powered, i.e. second burning is excluded. Distillation blocks are one-, two- and three-stage, each block has a deflector, which can be equipped with a catalyst if necessary. All block parts have laundry, view windows (DN 100) and lighting. Distillation blocks can be heated in several ways. Most often with a gas burner (natural gas or propane-butane). Heating is also possible with electric heating or solid fuel (wood). In some versions, combined heating of the boiler (electricity + solid fuels) is possible. Recommended power for distillers of the above capacity: electricity approx. 21-40 kW/h and gas burners approx. 40-75 kW/h. The distillation block boiler is always double-walled and therefore has a pressure control valve and a non-return valve, which maintains a constant operating pressure in the cooler and prevents damage during heating or cooling of the boiler (maximum operating pressure in the cooler is 0.4 bar). The body of the boiler is completely stainless (tank and body) and the outlet valve is 4 " Distillation blocks can be placed on one unit above each other or next to the boiler (this option is not very common, but it is used in cases where the customer has a low ceiling in the working areas). The transfer pipes are stainless with a large performance and low water consumption.Basic dimensions: - height of distillation blocks 3100 mm (3300 mm with catalytic converter) - minimum installation space 2000 x 2800 mm - width of distillation blocks - 2800 mm - inlet or filling opening - 250 mm If the customer has sufficient ceiling height (at least 3.1 m). + cleanliness - stronger aroma of the brand - saving time and energy Accessories: - control unit thermostat (automatic cooling control) - gas burners (natural gas or propane-butane) - digital thermostat (for electric heating) - catalyst (copper wire bundle) - lighting of valves and boilers - catalyst (ceramic beads) - steam mixer - mixer with motor - heat exchanger.

It comes equipped with a pot , stainless steel Tri clamp seal , the column with helmet attached, and a side condenser with water inlet at the bottom and water outlet at the top, as well as a copper spout where the distillate will come out of. It also comes with 2 internal sieves, one at the bottom of the column, which is removable, and a top sieve on the helmet to prevent the passage of plants into the tube and condenser. With the tri clamp seal, you will not have to use an additional sealing method. Plastic hoses / heat source not included.

MINI distillation cooler. Simple and short model. Length: 40 cm. Connection at the bottom: 12 mm. Combined distillation: Distilling hot liquid and condensing in one device! Simple construction and delicate less fragile connections..