Corking equipment

corkscrew for metal caps, Tenco descending working element.

simple and semi-automatic capper for push-on T-caps or oil bottle caps. The innovative corker works with compressed air (the compressor is not included in the price). Caps are installed manually on the bottle and 2 start buttons are pressed. The cap is pressed onto the bottle using adjustable pressure. Technical data: Productivity: 300-400 bottles/h. ; Size: 375x325x745mm; Weight: 25kg; Device material: metal..

simple and semi-automatic corker for metal crown caps, push-on plastic caps or cork (also synthetic) caps with a diameter of up to 25mm and a length of up to 45mm. The innovative and multifunctional corker works with compressed air (the compressor is not included in the price). The caps are installed manually in the slot and the 2 start buttons are pressed. The cap is pressed onto the bottle using adjustable pressure. Suitable caps T-type. Technical data: Cap size: min. 25mm; Productivity: 300-400 bottles/h. ; Size: 375x325x745mm; Weight: 25kg; Device material: metal; Caps: metal, plastic, composite materials and cork wood..

.

Your own capped beer can is possible thanks to this easy-to-use device! Cannular offers you the opportunity to try your home beer. Canned beer has some important advantages compared to bottled beer: less risk of oxidation and 100% protected from light, so there is no slight odor due to UV rays penetrating the beer. Thanks to the favorable price-quality ratio, Cannular is the choice for hobby brewers as well as small brewers. The can is rolled in just a few seconds. What's more, jars offer endless possibilities for personalization. The compact Cannular is also extremely easy to use. ATTENTION: Not all cans fit the device. Operation: The beauty of the Cannular is how really easy it is to use, and the semi-automatic model makes canning beer even easier. With only three work stations, it only takes a few minutes to familiarize yourself with the machine. The sewing process is as follows: Place the lid on the top of the jar and place the jar on the table insert. Turn the platform lever clockwise to raise the can. Press the action button and wait for the jar to stop spinning. Turn the platform lever counterclockwise to lower the can. Specifications: Power: 250 W - 24 V - DC, Nominal speed: 3300 rpm, Dimensions (L x W x H): 41 x 25 x 54 cm, Weight: 18.5 kg Please note: When you receive the Cannular, the rollers are set and factory tested. For 100,000 cans, new ones should not be needed yet. The working element comes unadjusted and its correct setting is necessary to obtain close rolling work. The cannular test shows that only 0.4mm (0.015") of actual overlap is needed to seal at 90 PSI. Properly tensioning the work element takes some practice and requires a few cans to test, e.g. fill the height with water to properly adjust the rolling tension. You want to the tension on the roller would be strong but not so strong as to dent the can Once you learn the correct tension it is very quick and easy to readjust it Extras: splash guard..

A custom-made socket that matches the cap of your choice..

Corkscrew for crown caps made in Italy. Thanks to the spiral thread, capping requires less force than with normal corkers. The set includes 26mm and 29mm tips. Weight 7kg..

The highest quality manual corkscrew for crown corks made in Italy. Thanks to the spiral thread, capping requires less force than with normal corkers. The set includes 26mm and 29mm tips. With this capper, you can successfully screw wires onto shampoo bottles - by installing the wire in the slot and holding it under the lever, you can screw the wire onto the cap..

Manual capper for natural shampoo caps D22-29.5mm and height max. 55 mm. Suitable bottles 0.5-1.5l. Made in Italy..

Simple and semi-automatic manual corkscrew for screw-on plastic caps 28mm. Approximate delivery time: 30 days. Technical data: Cap size: 28mm; Productivity: 20 pcs/min. Metal tip set 1pc..

Stainless steel capping machine for screw-on metal caps - standard 31.5mm x 24mm (other sizes are also possible). Suitable bottles with a height of up to 355mm and a diameter of max. 195 mm. Capping time 2.5 seconds. Option 230V. Dimensions: 1650x460mm, weight 90kg. Working process: place the cap on the bottle and the bottle under the device - press the buttons. Extras: Device on wheels, threading head in addition to other caps. Made in Italy..

corker powered by compressed air greatly simplifies larger corking work. Suitable for bottles with a maximum height of 65cm and a diameter of 21cm and caps with a maximum height of 60mm and a diameter of 40mm. The height of the bottles can be adjusted with a pedal-lever. Weight: 42kg..

Simple manual corkscrew for screw caps 28...42mm. Approximate delivery time: 30 days. Technical data: Cap size: 28-42mm; Productivity: 20 pcs/min. Metal tip set 1pc. Dimensions 40x20x20cm.

Manual crown cap closer. Made in Italy

Manual corkscrew for synthetic and natural corks up to 25mm. Bottles with a height of 23-33cm are suitable. You can use while sitting. Made in Italy..

Simple and semi-automatic corkscrew for screw-on and non-threaded metal caps 30-31.5mm. Innovative and multifunctional corkscrew for various metal caps. Suitable bottles: Oil bottles: 31.5x24mm; Wine bottles: 30x60mm. Technical data: Productivity: 300-400 bottles/h. ; Hand cap 52W / 230V; Size: 320x250x780mm and weight: 22kg; Device material: stainless steel; Caps: stainless steel or steel..

A silicone pad inside the thread-head of the bottle. Suitable for 10-20mm pre-threaded caps..

A silicone pad inside the thread-head of the bottle. Suitable for 20-30mm pre-threaded caps..

Silicone socket in the threaded head. Suitable for 30-40mm threaded caps..

Silicone socket in the threaded head. Suitable for 40-50mm threaded caps..

Aluminum socket for screw caps 10-30mm. Also order silicone pads in the appropriate size for the socket..

Aluminum socket for screw caps 30-50mm. Also order silicone pads in the appropriate size for the socket..

Semi-automatic corker in a vacuum environment on a stainless frame. Work process: the operator installs the container with the cap in the device and presses the buttons... after that, the capping takes place in a vacuum environment, which can be monitored by the pressure gauge. Technical data: dimensions 470x500x750mm, compressed air 6bar 600l/min, vacuum -0.5bar. Suitable container: glass jar with a screw-on lid, diameter 25...110mm and height 20...220mm. Productivity up to 500 cans/h..

Corkscrew made of stainless steel (AISI304) for cylindrical wine corks with a diameter of 22-25mm (28mm special order) and a length of up to 50mm. Manual cap filling and optional automatic cap collecting funnel with feeder. Suitable bottles height up to 375mm, capping duration 3 seconds, working element with compressed air 4Bar/9.8 Nl and 6Bar/13.8 Nl. Additional equipment: stainless steel collection funnel for corkers with feed. device on wheels..

Corking head for corking 26mm corks - suitable for C500 corker..

Adapter for installing 26mm and 29mm crown caps for the Ferraar capping bench..

Hand corker crown cap socket for 26mm caps.

Hand corker crown cap socket for 29mm caps.

Manually removing crown caps and ice caps from shampoo bottles..

Semi-automatic three-in-one device shampoo bottle disc stopper - dispenser and liquid level control bottler. Made in Italy. Made of stainless steel. The device can be used to remove the pre-frozen cap from the bottle neck + dosing: liquid container 5L (manometer, compressed air valve) + bottle neck slot with liquid setting + manually controlled valve with liquid dispenser. Productivity 150-500pd/h / suitable bottles 35.7-150cl / weight 75kg / dimensions: 1142x920x1910mm / compressed air 6m3/h, 6bar.

semi-automatic 3in1 device for the shampoo method disc corker-dispenser and liquid level control bottler. Made in Italy. Made of stainless steel. The device can be used to remove the pre-cooled cap from the bottle neck + foam removal with compressed air (manometer, compressed air valve) + bottle neck slot with liquid setting + manually controlled 3T valve with liquid dispenser. Productivity 150pd/h (0.75L) / bottles D 70-114mm and H 245-380mm / weight 75kg / size: 75x60x160 / compressed air 0.5/2bar.

Crown cap and ice cap removal, hand dispenser and bottler all in one device. For small volume production..

Crown cap remover..

Crown cap remover for 29mm corwn caps.

Corking bench also for beer bottles using sparkling wine and additional equipment. Equipped with chrome press teeth and bottle neck support. Maximum diameter of the cap: 30.5mm; cork type: wine cork (natural, agglomerated, synthetic), beer cork and sparkling wine cork. Accommodates bottles with a height of 23 - 39 cm (smaller height is possible if you use a homemade lifting block). Accessories: crown cap adapter available separately (ask for extras)..

The hand capper closes the lower control sealing ring of the pre-threaded caps. Suitable caps for caps with a length of Ø28mm, 18mm and 22mm..

The hand capper closes the lower control sealing ring of the pre-threaded caps. Suitable caps Ø31.5mm, 18mm and 24mm length/height caps..

Crown cap slot for capping machine for 26mm caps

Simple and manual corkscrew for pre-threaded metal caps Ø 20-24mm and cap height 15-24mm. Made in Italy..

Manual corkscrew for synthetic and natural corks up to 30mm. Suitable bottles with a height of 25-38cm. Made in Italy..

Manual corkscrew for synthetic and natural corks up to 26mm. Bottles with a height of 25-35cm are suitable. Made in Italy..

The hand capper closes the lower control sealing ring of the pre-threaded caps. Suitable caps Ø28mm, on caps with a height of 18mm

The hand capper closes the lower control sealing ring of the pre-threaded caps. Suitable caps for Ø 31.5mm, 18mm and 24mm long caps.

The hand capper closes the lower control sealing ring of the pre-threaded caps. Suitable caps on Ø30 and 60mm pre-threaded caps..

Simple and semi-automatic pneumatic capper for push-on plastic lids - made in Italy. Control is done by pressing 2 buttons at once... ensuring operator safety. Buckets max. dimensions: diameter 250mm and height 300mm. Additional equipment: push-in nozzles for buckets of different diameters. Technical information: Compressed air consumption 150nl/min, dimensions 450x450xH950, Weight 20kg, adjustable press pressure max. 700kg, pneumatic components Camozzi/Festus. Warranty 1 year. Maintenance: Cider Mill OÜ.

A simple and semi-automatic pneumatic capper for pre-threaded screw-on metal and plastic caps from an Italian manufacturer. Innovative and multifunctional corkscrew for metal and plastic caps. Dimensions: 350x350x700mm, Weight: 15kg, Air pressure: 6Bar, Accessories: magnetic nozzle, specially made plastic cap nozzles.

Pneumatic capper for MIRKO plastic and crown caps. Enameled steel construction, suitable for crown caps with a diameter of 26/29 mm and mushroom plastic caps. Thanks to the simple connection to the compressed air source, it allows you to perfectly seal bottles of beer, wine, fruit juices, etc. Its small size makes it ideal for wineries and breweries where space is never enough. Dimensions: 28x22x65 (h) cm. Weight: 19 kg SAFETY: two-handed operation with levers avoids the risk of crushing the upper limbs by the operator. Simple and quick: place the cap in the collar so that it rests with the magnet, place the bottle in the center of the plate, resting it on the adjusting fork, pull the lever with both hands, the corked bottle can be removed from the machine. Maximum working pressure: 4/6 atm for crown caps and 2/3 atm for plastic caps. Adjustable bottle height, with convenient buttons on the back. NB! Color may vary depending on availability.

Corking head with ring for corking crown corks.

Crown cap slot for capping machine for 29mm caps.

Stainless Italian-made pneumatic (compressed air) capping machine for crown caps. Suitable caps: standard 26mm can also be set to caps of other sizes, which is preceded by a factory check with the customer's caps. Before capping, the cap is placed in the slot and the bottle is installed. Bottle height up to 375mm and diameter up to 195mm are suitable. One operation lasts 3 seconds. The device works with compressed air 4-6bar. Extras: 29mm cap closure.

Corkscrew made of stainless steel (AISI304) for cylindrical wine corks with a diameter of 22-25mm (28mm special order) and a length of up to 50mm. Manual cap filling and optional automatic cap collecting funnel with feeder. Suitable bottles height up to 375mm, capping duration 3 seconds, working element with compressed air 4Bar/9.8 Nl and 6Bar/13.8 Nl. Additional equipment: stainless steel collection funnel for corkers with feed. device on wheels..

Stainless capping machine made in Italy for shampoo and other natural caps 3F/380V. Shampoo cap with a diameter of up to 31.5mm and a height of up to 50mm. Natural caps with a diameter of 26-30mm and a height of up to 50mm. Bottles with a height of up to 375mm are suitable. Capping time 1.8 seconds. Available 3F electric or compressed air (6bar) models. Extras: Device on 230V - extra charge for inverter..

Stainless Italian-made capping machine for various T-shaped and cylindrical caps, also caps made of cork wood. Suitable Caps: Top Head Diam. 28-30mm and height 10-20mm and the lower part entering the bottle neck diam. 18-19mm and height 18-22mm. The device can also be set up for caps of other sizes, which is preceded by a factory check with the customer's caps. Before capping, the cap is placed in the slot and the bottle is installed. Suitable bottle height up to 375mm. One operation lasts 3 seconds. The device works with compressed air 3-4bar. ACCESSORIES: Device on wheels..

Semi-automatic capper for shampoo bottles. Caps Ø30-32mm and 50mm long are suitable for the standard model.. Manual filling of caps (approx. 100 pcs). Work process with foot switch or continuous. Stainless steel AISI 304. Technical information: height 2200 x width 600 x depth 600mm; work surface height 900mm; motor 220-380 V HP 1 400V; weight 160 kg; productivity approx. 1000 bottles per hour.

High quality Italian made automatic capping machine from Tenco for PFP ROPP metal caps. Place the cap manually on the bottle and press the buttons - the cap is quickly attached. The device automatically threads the cap and closes the cap's protective ring. Dimensions: 450x450x1100mm. Weight: 50kg Electric power: 0.25HP..

Simple and semi-automatic pneumatic capper for screw-on metal and plastic caps from the Italian manufacturer Tenco. Innovative and multifunctional corkscrew for metal and plastic caps. Dimensions: 500x500x850mm, Weight: 25kg, Air pressure: 6Bar, Accessories: magnetic nozzle, specially made nozzle for plastic caps.

The hand capper closes the lower control sealing ring of the pre-threaded caps. Suitable caps for caps with a length of Ø28mm, 18mm and 24mm..

The hand capper closes the lower control sealing ring of the pre-threaded caps. Suitable caps Ø24mm.

Stainless steel capping machine for screw-on metal can caps - standard 42mm (other sizes are also possible). Suitable cans with a height of up to 355mm and a diameter of max. 115 mm. Capping time 3 seconds, max. torque 2.8Nm. Compressed air consumption 4-6bar. Work process: place the cap on the jar and the bottle under the device - press the button. Dimensions: 1620x485mm, weight 60kg. Extras: Device on wheels. Made in Italy..

Manual corkscrew for synthetic and natural corks up to 22-23mm. We recommend using caps in size D22mm or, for larger caps, softer caps D23mm.