Corkers for threaded caps

The hand capper closes the lower control sealing ring of the pre-threaded caps. Suitable caps Ø28mm, on caps with a height of 18mm

The hand capper closes the lower control sealing ring of the pre-threaded caps. Suitable caps on Ø30 and 60mm pre-threaded caps..

The hand capper closes the lower control sealing ring of the pre-threaded caps. Suitable caps for Ø 31.5mm, 18mm and 24mm long caps.

The hand capper closes the lower control sealing ring of the pre-threaded caps. Suitable caps Ø24mm.

The hand capper closes the lower control sealing ring of the pre-threaded caps. Suitable caps Ø31.5mm, 18mm and 24mm length/height caps..

Capping machine on crown caps. The set includes both D26mm and D29mm tips

A silicone pad inside the thread-head of the bottle. Suitable for 10-20mm pre-threaded caps..

A silicone pad inside the thread-head of the bottle. Suitable for 20-30mm pre-threaded caps..

Silicone socket in the threaded head. Suitable for 30-40mm threaded caps..

Silicone socket in the threaded head. Suitable for 40-50mm threaded caps..

Adapter for installing 26mm and 29mm crown caps for the Ferraar capping bench..

Corking bench also for beer bottles using sparkling wine and additional equipment. Equipped with chrome press teeth and bottle neck support. Maximum diameter of the cap: 30.5mm; cork type: wine cork (natural, agglomerated, synthetic), beer cork and sparkling wine cork. Accommodates bottles with a height of 23 - 39 cm (smaller height is possible if you use a homemade lifting block). Accessories: crown cap adapter available separately (ask for extras)..

A simple and semi-automatic pneumatic capper for pre-threaded screw-on metal and plastic caps from an Italian manufacturer. Innovative and multifunctional corkscrew for metal and plastic caps. Dimensions: 350x350x700mm, Weight: 15kg, Air pressure: 6Bar, Accessories: magnetic nozzle, specially made plastic cap nozzles.

Simple and semi-automatic pneumatic capper for screw-on metal and plastic caps from the Italian manufacturer Tenco. Innovative and multifunctional corkscrew for metal and plastic caps. Dimensions: 500x500x850mm, Weight: 25kg, Air pressure: 6Bar, Accessories: magnetic nozzle, specially made nozzle for plastic caps.

Stainless steel capping machine for screw-on metal can caps - standard 42mm (other sizes are also possible). Suitable cans with a height of up to 355mm and a diameter of max. 115 mm. Capping time 3 seconds, max. torque 2.8Nm. Compressed air consumption 4-6bar. Work process: place the cap on the jar and the bottle under the device - press the button. Dimensions: 1620x485mm, weight 60kg. Extras: Device on wheels. Made in Italy..

Semi-automatic corker in a vacuum environment on a stainless frame. Work process: the operator installs the container with the cap in the device and presses the buttons... after that, the capping takes place in a vacuum environment, which can be monitored by the pressure gauge. Technical data: dimensions 470x500x750mm, compressed air 6bar 600l/min, vacuum -0.5bar. Suitable container: glass jar with a screw-on lid, diameter 25...110mm and height 20...220mm. Productivity up to 500 cans/h..

.

Your own capped beer can is possible thanks to this easy-to-use device! Cannular offers you the opportunity to try your home beer. Canned beer has some important advantages compared to bottled beer: less risk of oxidation and 100% protected from light, so there is no slight odor due to UV rays penetrating the beer. Thanks to the favorable price-quality ratio, Cannular is the choice for hobby brewers as well as small brewers. The can is rolled in just a few seconds. What's more, jars offer endless possibilities for personalization. The compact Cannular is also extremely easy to use. ATTENTION: Not all cans fit the device. Operation: The beauty of the Cannular is how really easy it is to use, and the semi-automatic model makes canning beer even easier. With only three work stations, it only takes a few minutes to familiarize yourself with the machine. The sewing process is as follows: Place the lid on the top of the jar and place the jar on the table insert. Turn the platform lever clockwise to raise the can. Press the action button and wait for the jar to stop spinning. Turn the platform lever counterclockwise to lower the can. Specifications: Power: 250 W - 24 V - DC, Nominal speed: 3300 rpm, Dimensions (L x W x H): 41 x 25 x 54 cm, Weight: 18.5 kg Please note: When you receive the Cannular, the rollers are set and factory tested. For 100,000 cans, new ones should not be needed yet. The working element comes unadjusted and its correct setting is necessary to obtain close rolling work. The cannular test shows that only 0.4mm (0.015") of actual overlap is needed to seal at 90 PSI. Properly tensioning the work element takes some practice and requires a few cans to test, e.g. fill the height with water to properly adjust the rolling tension. You want to the tension on the roller would be strong but not so strong as to dent the can Once you learn the correct tension it is very quick and easy to readjust it Extras: splash guard..

Simple and semi-automatic corkscrew for screw-on and non-threaded metal caps 30-31.5mm. Innovative and multifunctional corkscrew for various metal caps. Suitable bottles: Oil bottles: 31.5x24mm; Wine bottles: 30x60mm. Technical data: Productivity: 300-400 bottles/h. ; Hand cap 52W / 230V; Size: 320x250x780mm and weight: 22kg; Device material: stainless steel; Caps: stainless steel or steel..

corkscrew for metal caps, Tenco descending working element.

High quality Italian made automatic capping machine from Tenco for PFP ROPP metal caps. Place the cap manually on the bottle and press the buttons - the cap is quickly attached. The device automatically threads the cap and closes the cap's protective ring. Dimensions: 450x450x1100mm. Weight: 50kg Electric power: 0.25HP..

Simple and manual corkscrew for pre-threaded metal caps Ø 20-24mm and cap height 15-24mm. Made in Italy..

The hand capper closes the lower control sealing ring of the pre-threaded caps. Suitable caps for caps with a length of Ø28mm, 18mm and 24mm..

Simple and semi-automatic manual corkscrew for screw-on plastic caps 28mm. Approximate delivery time: 30 days. Technical data: Cap size: 28mm; Productivity: 20 pcs/min. Metal tip set 1pc..

The hand capper closes the lower control sealing ring of the pre-threaded caps. Suitable caps for caps with a length of Ø28mm, 18mm and 22mm..

Simple manual corkscrew for screw caps 28...42mm. Approximate delivery time: 30 days. Technical data: Cap size: 28-42mm; Productivity: 20 pcs/min. Metal tip set 1pc. Dimensions 40x20x20cm.

Stainless Italian-made pneumatic (compressed air) capping machine for crown caps. Suitable caps: standard 26mm can also be set to caps of other sizes, which is preceded by a factory check with the customer's caps. Before capping, the cap is placed in the slot and the bottle is installed. Bottle height up to 375mm and diameter up to 195mm are suitable. One operation lasts 3 seconds. The device works with compressed air 4-6bar. Extras: 29mm cap closure.

Stainless steel capping machine for screw-on metal caps - standard 31.5mm x 24mm (other sizes are also possible). Suitable bottles with a height of up to 355mm and a diameter of max. 195 mm. Capping time 2.5 seconds. Option 230V. Dimensions: 1650x460mm, weight 90kg. Working process: place the cap on the bottle and the bottle under the device - press the buttons. Extras: Device on wheels, threading head in addition to other caps. Made in Italy..

Aluminum socket for screw caps 10-30mm. Also order silicone pads in the appropriate size for the socket..

Aluminum socket for screw caps 30-50mm. Also order silicone pads in the appropriate size for the socket..