Cooling units, automatisation

The glycol is suitable to be used as an antifreeze in homebrewing cooling systems, accessories for production of food and beverage, and wine tanks. Antifreeze glycol is free of nitrites, amines and phosphates. In addition, propylene glycol is non-toxic and colourless, and as a consequence suitable for food industry equipment. Antifreeze glycol is a highly concentrated product, which has to be diluted with water. Depending on the degree of refrigeration, the recommended doses are as follows: -3°C: 10% Glycol - 90% Water. -9°C: 20% Glycol - 80% Water. -14°C: 30% Glycol - 70% Water. -22°C: 40% Glycol - 60% Water. -32°C: 50% Glycol - 50% Water. -45°C: 60% Glycol - 40% Water. Characteristics: Non-toxic and colourless. Free of nitrites, amines and phosphates.

After connecting to the mains, the device is ready for operation in 2..4 minutes. Temperature range +2...+10C. Cooling capacity 30l/h, with 1 outlet tap, cooling pipe 13.5jm, dimensions: 170x280x325mm, weight: 13kg, power consumption 267W/230V/50Hz/1.16A. connecting hoses: John Guest 3/8 When using a cooler, it is necessary to purchase additional pipe and tank fittings. The pressure from the CO2 cylinder is approx. 2.5...2.9 bar..

Cooler with compressor is suitable for Keykegs 2.8...3.2bar. After connecting to the mains, the device is ready for operation in 2..4 minutes. Temperature range +2...+10C. Cooling capacity 30l/h, with 1 outlet tap, cooling pipe 13.5jm, dimensions: 170x280x325mm, weight: 13kg, power consumption 267W/230V/50Hz/1.16A. connecting hoses: John Guest 3/8. When using a cooler, it is necessary to purchase additional pipe and tank fittings. The pressure from the CO2 cylinder is approx. 2.5...2.9bar if you use a metal barrel.

Cooler with compressor is suitable for Keykegs 2.8...3.2bar. After connecting to the mains, the device is ready for operation in 5..8 minutes. Temperature range +2...+10C. Cooling capacity 35-40l/h (max. 50l/h), with 2-output tap, cooling pipes 14jm, dimensions: 210x331xh465mm, Weight: 29.3kg, power consumption 1100W/230V/50Hz/1.16A. connecting hoses: John Guest 5/8. When using a cooler, it is necessary to purchase additional pipe and tank fittings. The pressure from the CO2 cylinder is approx. 2.5...2.9bar if you use a metal barrel.

Stainless steel (suitable for nutrients) 36-plate heat exchanger for heating or cooling. Connection nuts 3/4" external thread. Hose connections for 12mm hose included. For example, it is possible to cool 60L of almost +95C liquid to 20C in 10 minutes if the coolant is +10C..

Made of stainless steel (suitable for nutrients) and laser technology, the surfaces of the heat exchanger are smooth and therefore the device is self-cleaning. In addition, the device can be completely disassembled. By ensuring the amount of cooling or heating water is 2750l/h and the cooled/heated liquid is 900l/h, the temperature difference is 3 degrees. The additional flow must be 3x greater than the raw material flow to ensure the correct temperature. Saves energy costs up to 50%. Heat exchangers of different capacities and sizes are available for quantities up to 21,000 l/h..

Insulation jacket for 18.9L KEG tank. Size: 30x67cm, additional option and place for an ice shirt (see accessories), thick insulation keeps the product feeling cool, shirt is 100% waterproof, durable flexible polyester, handles and shoulder strap for easy transport, zipper at the top for easy access to the faucet and hoses, outstanding design , includes a removable shock compensation layer..

The small pouches in the cooling shirt are filled with liquid, and by freezing the shirt, the frozen pouches cool the container. The ice jacket is flexible enough to allow the surrounding ice to remain inside its pouch when bent. Size: 43 x 58 cm, reusable, flexible and light, FDA compliant, just freeze the cooling shirt, does not get wet..

The cooling device is made of stainless steel, ideal for cooling a 400-500l tank. The cooling unit is equipped with a thermal controller, a water tank and a pump. *A stainless steel coil is available for direct cooling at an additional cost. Operating temperature range -6°C to +30°C. Glycol is used for cooling. Technical data: cooling unit 3/4HP = 0.56kw R290; 220V/50hz, pump pressure up to 8m/h, ice bank 58l, dimensions 636x422x595, weight 51kg.

High-quality German-made mobile cooling device in a stainless case that works with a glycol solution (15% propylene glycol and 85% water). The device is specially designed for checking the fermentation temperature of wine through the tank's heat exchanger - cooling capacity 1.4kw/230V (40hl) with glycol solution -5C. Dimensions 1010x500x490mm, weight 49kg..

High-quality Italian-made mobile and complete cooling device in a stainless case, which works with a glycol solution (15% propylene glycol and 85% water). The device is specially designed for controlling the wine fermentation temperature through the tank's heat exchanger - cooling capacity 8.5kw/400V, electricity consumption 3.7kw, glycol solution up to -5C, circulation 2600l/h. Dimensions 960x790x850mm.

High-quality cooling device made in Italy that works with a glycol solution (15% propylene glycol and 85% water). The device is specially designed for checking the fermentation temperature of wine through the tank's heat exchanger - cooling capacity 3.2kw (2.750 Kcal/h) with glycol solution +5C. The device can also be used to stabilize tartaric acid - the power of the device is 1.73kw (1,500Kcal/h) with a glycol solution (40% propylene glycol and 60% water). Equipped with stainless 50L tank and circulation pump. Refrigerant R507. Max. cooling capacity 13,000L. Dimensions: 1050x600x770h. Weight approx. 100 kg..

Stainless steel (V4A) cooling and heating pipe 2.5 m long..

Stainless steel cooling tube 9.5mm and sphere diameter 20cm, total height 50cm and spiral height 12cm. Warranty 3 years. Connection fittings Gardena watering hose fittings. It is possible to cool 20l approx. +100C feed liquid for 20 min. to +20C if the coolant is +13C..

The very energy-efficient direct cooling device AS-200 is a new and complete model for cooling drinks. The standard device has a 2-spiral... for cooling two different drinks. Cooling capacity up to 200l/h, ice bank 20kg/58l, weight 51kg. Cools the liquid to +2...+6C. Power 1380W, ice bank 10-30kg, dimensions 610x530x420mm. The set also includes quick connectors with 1/2" internal thread for making various connections..

Model AMC MCAEY 15/1 - more detailed information in the product catalog..

Fully automatic and compact cooling unit MKevo 11 Pro plate heat exchanger with a cooling capacity of up to 6.76kw (compressor power consumption 2.59kw). Input +20C and output +2.5C. Dimensions 1000x700x1324mm, weight 210kg.

Fully automatic and compact cooling unit MKevo 18 Pro plate heat exchanger with a cooling capacity of up to 8.66kw (compressor power consumption 3.51kw). If the input delta is +10C and the output is 0C, the productivity is 500l/h. Dimensions 1000x700x1324mm, weight 210kg. The set includes a plate heat exchanger and all necessary material to ensure cooling up to the plate heat exchanger..

The very energy-efficient direct cooling device AS-80 is a new and complete model for cooling drinks. The standard device has a 2-spiral (it is possible to add +2 spirals to cool the 4th drink)... for cooling two different drinks. Cooling capacity 50-70l/h, ice bank 5-10kg, weight 29kg. Cools liquid to +2...+6C.. dimensions 528x330x474mm. The set also includes quick connectors with 1/2" internal thread for making various connections..

Kiirkülmuti BF 90. Professionaalne tööstuslik kiirkülmuti, mis võimaldab kiirelt ja efektiivselt jahutada või külmutada toiduaineid, säilitades nende kvaliteedi ja toiteväärtuse. Kasutuspõhimõte: Seade on mõeldud värskelt valmistatud toitude kiireks jahutamiseks või külmutamiseks. Kiire temperatuuri langetamine aitab säilitada toidu tekstuuri, maitset ja toitaineid ning pikendab säilivusaega. Sobib ideaalselt restoranidele, toidutööstustele ja suurköökidele. Tehnilised andmed: - Mahutavus: 50 kg - Jahutustsükkel: +65°C kuni -18°C - Välismõõtmed: 780 x 960 x 2120 mm - Sisemõõtmed: 640 x 450 x 1460 mm - Toitepinge: 400V-3Ph 50 Hz - Võimsus: 3000W - Kaal: 190 kg

Professionaalne kiirkülmuti on varustatud kambriga, mis mahutab GN 1/1 mahuteid ja 600x400 mm aluseid. Seade on varustatud temperatuurianduri, sundjahutussüsteemi ja manuaalse sulatussüsteemiga ning seadme all asub kondensaadi kogumisalus. Seadmel on eraldi funktsioonid jäätise külmutamistsükliks -20°C juures ja pindmiseks sügavkülmutamiseks -40°C juures. Sisemine LED-valgustus tagab hea nähtavuse. Seadmel on lukustatav, isesulguv uks koos heli- ja visuaalse avamisalarmiga ning ukse avanemissuunda saab reguleerida.
Seade on varustatud ukse avamisel aktiveeruva mikrolülitiga, digitaalse termostaadiga ning roostevabast terasest korpuse ja kambriga. Kliimaklass 5 võimaldab seadmel sujuvalt töötada kuni +40°C keskkonnatemperatuuril. Seadmes kasutatakse külmaainet R290. Tehniliste andmete hulka kuuluvad reguleeritava kõrgusega roostevabast terasest jalad ning kambri maht, mis võimaldab mahutada 7 GN 1/1 mahutit või 7 600x400 mm alust. Kambri sisemõõtmed on 640x452x730 mm (kõrgus), kamber on varustatud 7 komplekti siinidega, mille vahekaugus on 70 mm. Seadme jahutamisvõimsus +3°C juures on 23 kg ja külmutusvõimsus -18°C juures 18 kg. Seade kaalub 116 kg, on varustatud digitaalse juhtpaneeliga, tarbib võimsust 1180 W ning on programmeeritav.
See kiirkülmuti on mõeldud toitude kiireks jahutamiseks või külmutamiseks, säilitades seejuures toidu kvaliteedi ja tagades toiduohutuse. Seade sobib ideaalselt professionaalsetele köökidele, restoranidele ja toidutööstustele. Tegemist on olulise tööstusseadmega, mida tuntakse erinevate nimetuste all: tööstuslik kiirkülmuti, blast chiller, šokk-külmuti, professionaalne külmutusseade, toidu kiirjahutusseade, GN mahutite külmuti, toiduainetööstuse seade, restorani külmutusseade või kommertsiaalne külmutusseade. Seadme disain vastab professionaalse köögi nõuetele, muutes selle tänapäevase toiduteeninduse oluliseks osaks.

Heat exchanger clamp for attaching to the ground and fixing, which in turn simplifies the cooling process..

Cooler with an exclusive and nice design with 2 outputs, which also includes design lighting integrated into the housing. Cooler with compressor is suitable for Keykegs 2.8...3.2bar. After connecting to the mains, the device is ready for operation in 2..4 minutes. Temperature range +2...+10C. Cooling capacity 30l/h, with 1 outlet tap, cooling pipe 13.5jm, dimensions: 185x300x345mm, weight: 16.5kg, power consumption 267W/230V/50Hz/1.16A. connecting hoses: John Guest 3/8. When using a cooler, it is necessary to purchase additional pipe and tank fittings. The pressure from the CO2 cylinder is approx. 2.5...2.9bar if you use a metal barrel.

IFerm Nano Solo is a complete device with temperature sensor, solenoid valve and GEKA-Plus fittings. When using, connect the device to the power source and to the cooling or heating water supply. A clearly visible LED display with large temperature readings. The stainless steel base plate allows for convenient mounting. Working principle: opens and closes the magnetic valve according to the temperature sensor..

Fermflex mobile temperature controller for fermentation tanks. Full digital temperature control with sensor and agnet valve in a compact and robust housing to facilitate fermentation and fermentation in fermentation tanks. Thanks to its compact design and handles, the control knob is easy to move and can be used for multiple tanks or as a permanent controller for one tank if needed. Can be used in a network of multiple controllers and is operated via an optional PC software package. Display-display for current and set temperatures and optical signal; the set includes a PC interface (BUS); adjustable cooling/heating/cooling and heating; magnetic valve included in the set for connecting the cooling / heating source (1/2); temperature sensor with 8 meter long cable; IP65, 24 V, power supply 230 V, including 5 meter long cable; temperature range: -9.99 ... +99.9 ° C, scale 0.1 ° C; 3-point PI/PID setting.

Seal for maxi 80 series replacement plate. Thanks to this spare part, it is possible to easily replace the old seal. This product only contains a gasket.

You'd love to have a temperature-controlled fermentation chamber, but you're not a certified electrician nor a DIY’er? If so, the Inkbird ITC-308 is the ideal solution for you.Features: CE-certified, large, clear LCD displays with set and measured temperature, dual output: cooling and heating, automatic alarm in the event of sensor malfunction and over-temperature, high and low temperature alarm, calibration function, temperature differential function can be configured separately for heating and coolingSpecifications: temperature control range: -50 to +99°C (adjustable), read-out to 0.1°C (resolution), accuracy: ± 1°C (-50 to +70°C), relay capacity heating: 10 A (max.) 240 V, relay capacity cooling: 10 A (max.) 240 V, stainless steel probe sensor, sensor cable length: 2.00 m, input power cable length: 1.50 m, output power cable length: 0.20 m, dimensions body: 140 x 68 x 33 mm

The Maxi 80 heat exchanger is made of AISI 304 stainless steel (18/10). Complete with stainless steel interface F 1 "¼ and 3/4" M and 4 stainless steel hose connections with 20 mm 3/4 "F nut (as in the picture). Professional model suitable for transferring the temperature of one fluid to another fluid. Heat exchange is carried out by the stainless steel plates of the heat exchanger without the two fluids mixing. The device is removable and removable and the seals between the plates ensure perfect isolation. The fluids flow in the opposite direction and thanks to the wavy surface of the plate, it causes a high turbulence of the fluids flowing inside, improving the heat exchange. Complies with European Directive 97/23 / EC (PED). Advantages: high coefficient of heat exchange, LIQUIDS DO NOT MIX, FLEXIBLE (possibility of increasing the plates), DURABILITY thanks to the regeneration of plates and / or replacement of various components. TECHNICAL CHARACTERISTICS: CONNECTIONS 1 "1/4, MAXIMUM WORKING PRESSURE: 10 bar, Plate surface: 0.08 square meters, Plate liquid volume: 0.25L, WEIGHT OF ONE PLATE: 0.5 kg, WEIGHT: 50kg, Number of plates: 22 CLEANING AND SANITIZATION: The device must be cleaned immediately after use to prevent residues from drying and sticking to the walls of the heat exchanger and interior surfaces: first rinse with hot water and then use e.g. OXI or some other basic cleaning agent with warm water. Then rinse again with water. Store the heat exchanger in a clean and dry place. Disinfection is always carried out before the next use: circulate a solution of water and acid cleaner or OXI solution. Warning: Gloves, goggles and a mask are always recommended at this stage..

A heat exchanger with openable plates allows the plates to be cleaned and added later. By adding cooling plates, it is possible to increase the heat exchange on the heat exchanger, thereby reducing the cooling rate of the wort. When you buy this product, you get a stainless steel plate and gasket ready to use..

This temperature controller connects with the RAPT web portal meaning that you can monitor, log and control the devices plugged into this temperature controller box remotely. This plug and play temperature controller box has two clearly marked blue and red power sockets for heating and cooling so you can monitor and control the temperature of a cooling and heating device at the same time. Each power outlet is rated to 10amp (2400 Watt max.). Colour screen: The colour screen clearly displays temperature, graph of future and past temperature settings and makes it much easier to perform profile temperature steps. RAPT Wifi Compatible: The controller will connect with the https://app.rapt.io/ portal. The portal records the temperature progression of the fermentation. You can set a different temperature or a new temperature profile. You can also see a future projection of temperature profiles that you might have running. PID Included: The temperature controller box comes with a PID (Proportional - Integral - Derivative) heating function often used for higher powered devices. This greatly reduces the chance of scorching and will deliver better temperature control with less fluctuation. Temperature Range: The temperature range of this device will enable you to control devices from -20°C up to 120°C. Various Mounting Options: The innovative design enables you to panel mount this controller, mount to a hanging point or hook, mount on top of a fridge or brewery. Simply unscrew the mounting plate and switch the mounting to your preferred orientation.