Tube 6x8mm blue strip

The Duotight Flow Stopper is a convenient device to use when filling closed drums or during filtering between drums. Operation: Mount the device to the CO2 outlet of your keg...then when the keg is full, it will automatically cut off the flow and prevent excess drink from escaping. Tip: For even better results, we recommend using the Flow Stopper with BlowTie spigot valve. The BlowTie allows you to apply pressure to the barrel, which means you can control the flow rate and reduce foaming during the filling process. To connect the BlowTie you need a short piece of pipe (8mm except related products below)..

Pressure control kit with integrated manometer and valve. Ideal for controlling the pressure in the pressure vessel or for carrying out the fermentation process in a light pressure environment, the so-called using as an air lock. An adjustable screw on the side allows you to increase and decrease the exact set pressure. With a screwdriver, you can easily disassemble the BlowTie assembly for thorough cleaning. Specification: suitable for pressure 0-15 psi (0 to 1 bar), made of food grade polyacetal (POM: polyoxymethylene), stainless steel screws, 8mm pipe (5/16") quick connection on both sides.

Fitting 5/18 internal thread as transition to 8mm pipe. Fits anyone with ball-lock quick couplers.

18.9L KEG pressure tank ball-lock quick coupling with 1/4 thread..

Conical rubber cap to seal the neck of the bottle and connect the air lock..

Fitting 5/8 internal thread as transition to 8mm pipe.

Triple for 6x8mm tube.

Transition between 12.7x8mm pipes.

Non-return valve between 8mm pipe..

Triple 8mm tube for sharing..

Fitting 1/2 internal thread as transition to 8mm pipe.

Transition of the beams to 8mm and 9mm tubes..

Fitting 1/4 external thread as transition to 8mm pipe..

Quick connection with tap.

Duotight quick couplings ensure a 100% leak-free result thanks to their excellent sealing quality. Their secret is not one, but two O-rings made of top quality EPDM. Cut the hose as straight as possible to ensure a complete seal. Duotight fittings are pressure-resistant up to 6.5 bar.

The device is designed to produce sparkling water by mixing drinking water and CO2 and is capable of producing 40 l of carbonated water per hour. Easy to connect to cooler and tap tower or faucet. An affordable solution for restaurants and other beverage establishments looking to expand their existing bar with perfectly chilled sparkling water. Advantages and useful functions: OUTPUT - the device is capable of producing up to 40 l/h, QUALITY - the materials used meet the strictest hygiene standards and ensure a long service life of the device, COMFORTABLE TO CARRY - easy and safe handling of the system thanks to the small size and the handle on top, CONSTRUCTION AND MAINTENANCE – Modern layout of LINDR cooling technology ensures ease of possible service and maintenance, PERFORMANCE, QUALITY, SIZE – best performance/quality/size ratio. POWER 345W/1.5A, NET WEIGHT 10kg, VOLTAGE (V) 220-240V 50Hz~1, BEVERAGE CONNECTION G 5/8, CO2 CONNECTION G 5/8.

Pipe insulation.

Quick connector for connecting 8mm pipe.

Plastic pressure tank 8l with cap and handle

Cooler with compressor is suitable for Keykegs 2.8...3.2bar. After connecting to the mains, the device is ready for operation in 5..8 minutes. Temperature range +2...+10C. Cooling capacity 35-40l/h (max. 50l/h), with 2-output tap, cooling pipes 14jm, dimensions: 210x331xh465mm, Weight: 29.3kg, power consumption 1100W/230V/50Hz/1.16A. connecting hoses: John Guest 5/8. When using a cooler, it is necessary to purchase additional pipe and tank fittings. The pressure from the CO2 cylinder is approx. 2.5...2.9bar if you use a metal barrel.

Cooler with an exclusive and nice design with 2 outputs, which also includes design lighting integrated into the housing. Cooler with compressor is suitable for Keykegs 2.8...3.2bar. After connecting to the mains, the device is ready for operation in 2..4 minutes. Temperature range +2...+10C. Cooling capacity 30l/h, with 1 outlet tap, cooling pipe 13.5jm, dimensions: 185x300x345mm, weight: 16.5kg, power consumption 267W/230V/50Hz/1.16A. connecting hoses: John Guest 3/8. When using a cooler, it is necessary to purchase additional pipe and tank fittings. The pressure from the CO2 cylinder is approx. 2.5...2.9bar if you use a metal barrel.

Perfect for carbonating and bottling beer, cider, wine, and many other beverages. The set includes a convenient tap with a hose for dispensing the drink.PRESSURE TANK:A new pressure tank (beer keg) made from high-quality stainless steel, with a convenient weight and size. The tank is easy to fill, empty, and clean, thanks to the large valve on top of the tank. The stainless steel surface is protected by a rubber base ring and a metal handle.Technical specifications:Volume: 18.9LDimensions: Height 555mm / Diameter 232mmWeight: 3.35kgPressure relief valve: 5 barCO2 TANK:A filled CO2 tank (min. 50 bar).Size: 2L / 1.5kgMax. pressure: 150 barDimensions: Ø100 x 435mmWeight: 5kgThe cylinder and valve are manufactured according to the EN 1964: 1999 standard and have the π-mark for compliance with ADR / RID requirements. The tanks can be brought/sent to us in Pärnu for refilling.REGULATOR:CO2 tank regulator-reducer with adjustable output pressure control. It allows the pressure of the gas exiting the tank to be reduced to the necessary operating pressure and ensures that the pressure is maintained automatically and as consistently as possible, regardless of changes in inlet pressure. The regulator is equipped with a safety valve. One manometer shows the CO2 pressure level in the tank, while the other indicates the pressure in the outlet pipes. The outlet pressures can be adjusted separately.

Perfect for carbonating and bottling beer, cider, wine, and many other beverages. The set includes a convenient tap with a hose for dispensing the drink.PRESSURE TANK:A new pressure tank (beer keg) made from high-quality stainless steel, with a convenient weight and size. The tank is easy to fill, empty, and clean, thanks to the large valve on top of the tank. The stainless steel surface is protected by a rubber base ring and a metal handle.Technical specifications:Volume: 23 LDimensions: Height 700mm / Diameter 250mmWeight: 5kgPressure relief valve: 5 barCO2 TANK:A filled CO2 tank (min. 50 bar).Size: 2L / 1.5kgMax. pressure: 150 barDimensions: Ø100 x 435mmWeight: 5kgThe cylinder and valve are manufactured according to the EN 1964: 1999 standard and have the π-mark for compliance with ADR / RID requirements. The tanks can be brought/sent to us in Pärnu for refilling.REGULATOR:CO2 tank regulator-reducer with adjustable output pressure control. It allows the pressure of the gas exiting the tank to be reduced to the necessary operating pressure and ensures that the pressure is maintained automatically and as consistently as possible, regardless of changes in inlet pressure. The regulator is equipped with a safety valve. One manometer shows the CO2 pressure level in the tank, while the other indicates the pressure in the outlet pipes. The outlet pressures can be adjusted separately.

Barrel connection fitting

Complete with faucets. Chrome finish, Mounting hole 35 mm, Diameter of beer line (stainless steel) 8x0.5 mm, Height at the top of the medallion 480 mm, Height of the bottom of the faucet tip 290 mm, Built-in stainless steel cooling pipe 8x0.5 mm.

Fitting angle for 9.5x9.5mm pipe.

Connector for connecting a 35mm beer tap.

Flexible pressure hose for Evabarrier quick connectors