Tank 300l closed with manway door

Hand pump to fill the tank floating lid seal..The size of the tank can vary up to max. +/-10%

Vaseline stainless steel container for sealing floating lids or lubricating seals. Vaseline oil is poured over juice or wine - the oil forms a layer on top of the drink that prevents air from coming into contact with the juice and protects the drink from fermentation. By using a floating lid with an oil seal, the apple juice also stays fresh for several months. The oil always remains on the surface of the juice, because it is lighter than the juice and thus does not mix with the juice. Vaseline oil is tasteless, odorless, colorless and has an unlimited shelf life. The oil is tasteless, odorless, transparent and has an unlimited shelf life..

Air lock for the tank for fermenting the product..

Stainless sealed container for storage or fermentation. Dimensions: D636mm, H 1470mm. Standard equipment: welded legs, bottom outlet - ball valve 1", side outlet - ball valve 1", sampling valve DN15, top cover Ø385mm, analog thermometer, level indicator Ø16 mm, 2 × inert gas fitting ½”.The size of the tank can vary up to max. +/-10%

Tank on stainless legs for wine fermentation (accessory) and/or short-term storage. The set includes: legs; conical base; bottom valve 1" (220mm from the plane); sampling valve 1/2"; upper valve 1/2", upper spring lid, floating lid (not for fermentation). Dimensions: diameter 636mm and total height 1570mm. Leg height 320mm. Additional equipment at extra cost: fermentation attachment, large extraction valve on the bottom side, container on wheels, level sensor, thermometer..The size of the tank can vary up to max. +/-10%

300L plastic closed cone container conforming to food standards. Well suited for fermentation and storage of products. The set includes: tank 300L; painted metal base frame (RAL3009); closable lid with air vent; added outlet 500mm above tank bottom for sampling with valve 1/2"; discharge pipe below. 11/2". Additional options: open from the top (without a hatch), open from the top and a wide low container, with a frame from the top... the possibility to attach a mixer and insert from the top through the hatch,.

container on stainless legs for fermentation and/or short-term storage of wine. The set includes: legs; conical base; bottom valve 1" (220mm from the plane); sampling valve 1/2"; upper valve 1/2", upper spring cover, floating cover. Dimensions: diameter 636mm and height 1320mm. Leg height 320mm..The size of the tank can vary up to max. +/-10%

A container on stainless legs for fermentation and/or short-term storage of wine. The set includes: legs; flat bottom; drain valve on the side 1/2", upper spring cover, floating cover. Dimensions: diameter 565mm and height 1320mm..The size of the tank can vary up to max. +/-10%

new (HDPE) plastic drum with a 220l lid that complies with food standards. Possibility to use the barrel for fermentation and to install an outlet valve in the lower part of the tank (making holes, valve and airlock at an additional cost). Height 975mm and diameter 590mm, neck 471mm, weight 9.6kg..

Tank accessories for fermentation or airtight storage. The set includes a floating cover, a hand pump, a seal, a water lock and an outer dust cover seal..The size of the tank can vary up to max. +/-10%

new (HDPE) plastic drum conforming to food standards of 220 l with 2 caps (56x4 and 70x6), which is also suitable for storing chemicals. Height 942mm and diameter 582mm, weight 8kg.

Stainless steel legless container for fermentation and/or short-term storage of wine. Top feather cover included. Tank without bottom valve. Dimensions: diameter 636mm and height 1000mm..The size of the tank can vary up to max. +/-10%

Stainless steel container with a closed top, a cleaning hatch and a conical bottom. Size: 1100L; Diameter: 953mm; Height: 1970mm. Standard equipment: welded legs, sampling valve 1/2", side ball valve 1", bottom ball valve 1", oval cleaning hatch, cover Ø385 mm, analog thermometer, level indicator Ø16 mm, 2 × inert gas connection ½", ladder support.The size of the tank can vary up to max. +/-10%

Container on stainless legs for short-term storage or fermentation of wine (additional fermentation kit required). The set includes: legs; conical base; only side valve 3/4", top spring cover, simple floating cover. Dimensions: diameter 636mm and height 1320mm. Leg height 320mm..The size of the tank can vary up to max. +/-10%

Stainless steel container with an open cone base with a floating lid and a cleaning hatch. Size: 1100L; Diameter: 953mm; Height: 1820mm; Chromed valves 1" (bottom), sampling valve 1/2" ; Stainless steel Aisi 304 - 18/10; Stainless legs with a height of 320 mm.The size of the tank can vary up to max. +/-10%

Reserve tank for short-term storage of pasteurized and hot juice between bottler and pasteurizer. The tank sensors are connected to the pasteurizer, and the pasteurizer pump automatically pumps the hot product into the tank. From there, the bottler's pump takes the juice and pushes it into the bottler. Option to insulate the tank with soft insulation..

Stainless pressure tank for 3bar pressure with cooling jacket. Conical base 60° with 50mm insulation. Size: 300L. In the set: washing head, overpressure valve adjustable up to 3bar, thermometer. Accessories: level sensor, adjustable feet, sampling valve. valves DN40 or DN50..The size of the tank can vary up to max. +/-10%

Stainless tank size 100L with bottom tap and top hatch. Diameter: 398mm, height 1220mm. stainless valve below 1", side valve 3/4".. Stainless steel Aisi 304..The size of the tank can vary up to max. +/-10%

380 liter fermentation tank with cooling and flat bottom. Thanks to the included cooling/heating plate, the fermentation process can be continuously adjusted and the temperature of the liquid can be monitored. The product is also complete with an analog thermometer. The top cover is made of stainless steel and has an airlock. Technical data: Material: 18/10 stainless steel (AISI 304), Capacity: 380 L, Diameter: 630 mm, Height: 1240 mm, Wall thickness: 0.6 mm, Bottom thickness: 0.7 mm, Lid thickness: 2 e.g. Technical data of the cooler: Material: 18/10 stainless steel (AISI 304), Width: 370 mm, Height: 1000 mm, heat exchanger: 0.74 m², Internal volume: 1.85 lt, thickness: 1 + 1 mm Standard equipment: 1 /2 ”M connection refrigeration plate, stainless steel valve 3/4 ”M outlet 40mm from the bottom side, large thickness stainless steel lid, Stainless steel digital thermometer, 4 stainless steel nuts to hermetically seal the lid, Removable and easy to disinfect food grade silicone seal, air lock, Stainless steel handles..