Steamer-oil extractor glass burette 100ml

High-quality stainless distillation-extractor 125L. Made in Italy. With the device, it is possible to produce various essential and vegetable oils very easily and quickly. Available in sizes 12 - 250L. The bottom of the unit is filled with water up to the grate and plant material is added and heated to boiling on a gas or electric stove. As a result of distillation, water vapor is released together with vegetable oils, which are captured in a glass flask, which in turn is cooled with water (the cooling process must start at approx. +50C). Since oil is lighter than water, oil and water separate from each other in the glass flask. The whole process takes approx. 60-70 min depending on the power of the heater. The devices can use fresh or dried plant material such as lavender, mint, rosemary, thyme, bay leaves, sage, oregano, chamomile, rose, eucalyptus, lemon balm, peppermint, wormwood, basil, verbena grass, cypress, mountain pines, helichrysum, geranium, eucalyptus, juniper, mastic, marjoram, parsley, rue, turpentine, valerian, etc. Packaging: Weight 40 kg, Size (LxWxH) 86x98x65 cm HOW TO USE? 1 ° Place the water in the boiler. The water must not exceed the level established by the grid previously placed at the bottom. 2 ° Place the plants in the still, avoiding blockages in the steam outlet pipes. 3 ° Place the upper grate and close the still lid 4 ° Attach the steel tube and the Pyrex glass burette 5 ° Turn on the heat source. Use the cooling system when the temperature has reached 50 °C. 6 ° When a temperature of about 100 ° C is reached, the steam grabs the essence from the plants due to the difference in the specific gravity of water and oils 7 ° After about one hour, check the rise of the oil level in the collection cylinder 8 ° Turn off the heat source if the rise is negligible 9 ° Collect the extracted oil through the tap placed at the bottom of the burette. Clean the still..

Inside the boiler, a lower grate and an upper grate are standard equipment, which accommodate fresh raw materials to be distilled. Newly designed Florence vessel, optimized for the separation of essential oils from aromatic water with the possibility of aromatic water circulation in the distillation chamber. Quick and easy lid opening to optimize loading and unloading times. Available accessories: electronic condensate temperature control kit, steam distribution kit for use of an external steam generator, perforated baskets for easy and quick loading and unloading of raw materials, modular lift for loading and unloading baskets. Suitable for use on a propane/methane gas stove or external steam generator (not included). Boiler and lid are insulated to reduce condensation during operation. Condensation takes place via a shell and tube condenser with double temperature control to regulate the flow of condensation water. The essential oil is collected and separated directly into the Florence steel pot. The still is equipped with a lower and upper grate. To speed up loading and unloading, it is recommended to use baskets and a lift. Steam can be generated with a gas stove or externally produced steam. Using the WORKER extractor is very easy thanks to the quick opening of the lid using the handle. Loading can be done directly with the plant material in the boiler or with the help of loading baskets. Baskets are loaded using an electric lift. Baskets and lift can be supplied as additional equipment on request. Steam can be generated with a gas boiler or an external steam generator. In the latter case, it is necessary to turn on the steam diffuser in the extractor. Here are some herbs that can be distilled with an extractor: lavender, mint, rosemary, thyme, bay, sage, oregano, chamomile, rose, eucalyptus, lemon balm, herbs, wormwood, basil, lugia, cypress, rock pine, mugo pine, helichrysum , geranium, eucalyptus, juniper, mastic, marjoram, parsley, rue, turpentine, valerian, etc..

PIREX glass separator sheet with holder. Suitable for extracting essential oils. The purpose of this accessory is to separate the essential oil from the aromatic - pre-extracted product..

Separating sheet made of PIREX glass. Suitable for extracting essential oils. The purpose of this accessory is to separate the essential oil from the aromatic - pre-extracted product. The set includes only the glass part without the holder..

Your distillate will drop into the PVC tube included with the separator, it will accumulate the oils at the top where it will be easy to extract  the oils using a standard plastic syringe (not included) , and the remaining floral waters / hydrosols will slowly come out the other end, into your own recipient, so that your separator never overflows.

It comes equipped with a pot , stainless steel Tri clamp seal , the column with helmet attached, and a side condenser with water inlet at the bottom and water outlet at the top, as well as a copper spout where the distillate will come out of. It also comes with 2 internal sieves, one at the bottom of the column, which is removable, and a top sieve on the helmet to prevent the passage of plants into the tube and condenser. With the tri clamp seal, you will not have to use an additional sealing method. Plastic hoses / heat source not included.