Stainless steel baster/sampler with rubber bulb

The ideal solution for sampling your beer, wine, etc. liquids in a quick and easy way. You can even use it as a cleaning cylinder! Made of crystal clear plastic that gives you the ability to judge color and transparency and read the hydrometer reading. It closes automatically, so there is no need to press the cylinder with your finger. 50 cm long, easy and automatic filling without pressing. The hydrometer is not included..

High-quality glass pipette, calibration accuracy 0.05ml.

High-quality glass pipette, calibration accuracy 0.10ml.

High-quality glass pipette, calibration accuracy 0.10ml.

Volumetric pipette with bubble, accuracy 0.030ml.

Volumetric pipette with bubble, accuracy 0.020ml.

The 3-scale hydrometer is ideal for checking wines, ciders, beers and honey. With three color scales: density, sugar content and potential alcohol content. Range: 0.990-1.150 SG 0-360 g / l of sugar. 0-20% alcohol by volume. Requires a 200 ml cylinder. Density measurement: Glass hydrometers follow the "Archimedes" principle: any object fully or partially immersed in any liquid experiences an upward force equal to the weight of the liquid placed around the object. A gram is the mass of 1 cubic centimeter (1 cm3 or 1 ml) of pure water. Some units are used to measure sugar, which have a direct relationship to the unit of mass. But other units are related to density or specific gravity. Relative density is the volume per unit volume (g/cm3). The specific gravity of pure water is 1 g/cm3. Sg of water is 1 (1000). The strength of wine is measured as follows: For example, the sugar content of wine before fermentation is +80 and -5 after. The formula for the alcohol content is: 85:7.5 =11.33% or based on the viscosity scale: at the beginning, e.g. 1.116 (16%) and at the end of fermentation 1.030 (4%), the alcohol content of the final product is 16-4=12%. The sugar content at the beginning and end must be added together and divided by 7.5. Or, for example, the juice shows the sugar content at 120g (+20C on the sugar scale) and viscosity 1.044 (on the scale), when the amount of sugar ferments the alcohol content is 6.1% (on the alcohol scale). If we want a wine with 14% alcohol content, and the sugar scale on the device shows that 270g of sugar per liter is necessary, but the measurement shows only 120g - therefore, we need to add sugar 270-120= 150g/l of sugar to the juice. What is a densimeter and why is it necessary? A hydrometer or densimeter is a gadget that measures the density of a liquid. This wort is used to measure the sugar content when brewing beer and beer. A densimeter is essentially a float with a scale on it. The scale shows how deep it sinks into the liquid and the reading is read from the water line. The result shows the ratio of the density of the liquid to the density of pure water. The density of pure water when measured with a hydrometer is always 1.000. If sugars or other soluble substances (for example, salt) are mixed into the water, we will get a reading higher than 1,000. However, the density of alcohol is generally lower than the density of pure water, so the reading of an alcohol-rich liquid is below 1,000. The readings of the densimeter are set for measurement in a liquid at 15 degrees (Celsius), so it is worth making sure that the liquid is more or less at this temperature at the time of measurement. A simple densimeter can be obtained from a store at a price of 5-15 euros. Densimeters are available with one and three scales. A single-scale densimeter only shows specific gravity. In addition to the specific gravity, the three-scale densimeter shows the sugar content in g/l and the potential alcohol content in the finished drink. For example, in the case of flounder, the densimeter reading should remain at the limit of 1020 on the specific gravity scale..

Accurate beer wort hydrometer with built-in thermometer. Metric in PLATO degrees. precision: 0.1 plateau. Thermometer: correction with a scale of 0-40 ° C / 0.1 ° C. Total length 37 cm. A 500 ml measuring cup is required. The strength of wine is measured as follows: For example, the sugar content of wine before fermentation is +80 and -5 after. The formula for alcohol content is: 85:7.5 =11.33%. The starting and ending sugar content must be added together and divided by 7.5..

Blue indicator for acidity meter Vinoferm®. Quality indicator! What is pH? pH is a measurement of the concentration of free hydrogen ions in a liquid. The pH of pure water is 7. Liquids with a higher concentration of hydrogen ions than water are acids and the pH value is less than 7. Liquids with a lower concentration of hydrogen ions are more alkaline and the pH value is greater than 7. The calculated pH value is 1-14..

Glass measuring cylinder 1000ml (accuracy 10ml). With a stable plastic base with six edges..

Laboratory scale with high level of accuracy PRE-TARE, i.e. pre-tare function for manually deducting the weight of the container, which is useful for checking filling levels Compact design, battery power option and light weight allows the scale to be conveniently transported from one location to another and used in different places Weighing range 0.01g to 1kg Allowed working temperature + 5 to +35 degrees Technical information: Height of the LCD screen indicator 15mm Weighing platform dimensions 150mm Input voltage 220V-240V AC 50Hz Battery power option Battery option Charging time 10 hours Operating time 12 hours Device weight approx. 0.89kg Warranty 2 years.