Spray head 360' perforated, thread

Rinse your tanks quickly and thoroughly with this rotating wash head! Small dimensions, but great efficiency! For use in tanks, demijohns, barrels, etc. thanks to the small diameter: 25mm. Connection: ¾ " female thread. Water consumption: up to 50 l/min. Water pressure: up to 4 bar. Tank max. diameter up to 1.5 meters. Adjustable water flow..

Tank accessories for fermentation. The set includes a floating cover, a hand pump, a seal, an air-water seal and an outer dust cover seal. Suitable seal 950mm.The size of the tank can vary up to max. +/-10%

Cover set includes. lid, seal, pressure relay. The product has been used and restored..

A small stainless steel AISI 316 washing head that ensures 360° washing of the container. Suitable for tanks up to Ø1.3m, flow rate 13200l/h 1bar; connection: 3/4 "internal thread, spray head Ø65 mm.

Ensures proper fermentation temperature is maintained. The tape adapts perfectly to tanks of different capacities and is suitable for tanks up to 33l. The ambient temperature can vary between 10 and 24°C. To maintain the ideal temperature between 21 and 24 ° C, it is necessary to move the belt to the correct position. As you move the tape towards the top of the vessel, the temperature of the wort is lower, while as you lower the temperature of the wort, it increases. The following are examples: air temperature between 10 and 16 ° C - height of the strip from the bottom of the container 4 cm, air temperature 16 to 20 ° C - height of the strip from the bottom of the container 10 cm, air temperature from 21 to 24 ° C - in the middle of the height of the container, above 24 ° C - connect to the mains open until the temperature drops below 24 ° C. Technical data: Power: 25W, Voltage: 220v, Frequency: 50Hz.

Spare part - handle suitable for 50l and 100l containers.