Renting equipment: Pasteurizer EHA-18 18kw

Stainless pasteurizer, to which you can purchase either a storage bag bottler with a productivity of up to 180l/h (+20C to +80C) or a bottle bottler - one of the selected bottlers is included in the price of the device. Electric power 18kw/400V/32A. Dimensions: 750x2050x1170 mm.

Stainless (Country of manufacture: Slovenia) pasteurizer with productivity up to 140l/h. A bottle bottler or bag-in-box bottler is available as an accessory. Electric power 12kw. Fully automatic - automatic on/off of the set temperature..

For the heat treatment of different fruits (apple, pear, blackberry, strawberry, blueberry, elderberry, currant, carrot, herbs, quince, beetroot, sea buckthorn, rowan berries, onion) suitable electric pasteurizer. Temperature checks at two points, in the heat exchanger and once on the outlet. The machine automatically controls the heat exchanger temperature. It is fully automatic. If the temperature of the juice to be pasteurized falls below the desired temperature, the output side of the machine is disabled and the juice circulates in the by-pass system until the temperature reaches the set level. The machine then starts charging again. At the end of the work, the tube spiral can be cleaned very easily with the help of a sponge ball. It requires minimal maintenance.Specifications:-Performance: 300 L/h (From 20°C to 80°C)-Electric demands: 28 kW, 400 V, 32 A, triphase-Material: WNr. 1.4301, AISI 304 stainless steel-Dimensions: 1480x1120x1940 mm-Weight: 230 kgSize: Length: 1539 mm, Width:    642 mm, Height:  1850 mm-IP65 certified electronics-Heat exchanger: soft water-Connections: DN 25-Level indicators for water and juice-Thermometers: 2 pcs-Automatic heat control, very easy to clean. Automatic operation – flowthrough type.-Requires minimal maintenance.Options:-Available options:-BiB OR bottle filler modules-Manual BiB filler with digital scale OR two head bottle filler moduleAccessories:  - Sponge balls for cleaning 

Pasteurizers are equipped with spiral heat exchangers and a hot water circulation pump. The juice tube is located inside the hot water tube with a larger diameter - hot water and the juice to be pasteurized move in opposite directions to each other, ensuring even heating of the juice. The power of the pasteurizer is stepwise adjustable according to the number of working heaters. The thermostat ensures the maintenance of the hot water temperature set by the user, which should be 4-5 degrees warmer than the temperature of the juice coming out. In the case of EHA18, EHA27 and EHA45 models, setting the juice temperature is by changing the flow rate using a manually adjustable valve, an external pump is required to supply the raw juice. EHA18E, EHA27E and EHA45E are equipped with a juice pump and the ability to automatically adjust the temperature of the juice. Pasteurizer EHA-18 productivity up to 200l/h and power is 18kw (2x9kw) 400V/32A. Warm-up time approx. 15 min. Dimensions 750x500x1150 mm, weight 150 kg. Setting the temperature of the juice by changing the flow rate using a manually adjustable valve, an external pump is required to supply the raw juice..

Pasteurizers are equipped with spiral heat exchangers and a hot water circulation pump. The juice tube is located inside the hot water tube with a larger diameter - hot water and the juice to be pasteurized move in opposite directions to each other, ensuring even heating of the juice. The power of the pasteurizer is stepwise adjustable according to the number of working heaters. The thermostat ensures the maintenance of the hot water temperature set by the user, which should be 4-5 degrees warmer than the temperature of the juice coming out. In the case of EHA18, EHA27 and EHA45 models, setting the juice temperature is by changing the flow rate using a manually adjustable valve, an external pump is required to supply the raw juice. EHA18E, EHA27E and EHA45E are equipped with a juice pump and the ability to automatically adjust the temperature of the juice. Pasteurizer EHA-27 productivity up to 300l/h / +80°C and power is 27kw (3x9kw) 400V/63A. Warm-up time approx. 10 min. Size 750x500x1400mm, weight 150kg. Setting the temperature of the juice by changing the flow rate using a manually adjustable valve, an external pump is required to supply the raw juice..

Pasteurizer EHA-45 productivity up to 450l/h / +80°C and power is 45kw 400V/80A. Warm-up time approx. 8 min. Size 750x500x1400mm, weight 200kg. Setting the temperature of the juice by changing the flow rate using a manually adjustable valve, an external pump is required to supply the raw juice..

Pasteurizers are equipped with spiral heat exchangers and a hot water circulation pump. The juice tube is located inside the hot water tube with a larger diameter - hot water and the juice to be pasteurized move in opposite directions to each other, ensuring even heating of the juice. The power of the pasteurizer is stepwise adjustable according to the number of working heaters. The thermostat ensures the maintenance of the hot water temperature set by the user, which should be 4-5 degrees warmer than the temperature of the juice coming out. In the case of EHA18, EHA27 and EHA45 models, setting the juice temperature is by changing the flow rate using a manually adjustable valve, an external pump is required to supply the raw juice. EHA18E, EHA27E and EHA45E are equipped with a juice pump and the ability to automatically adjust the temperature of the juice. Pasteurizer EHA-40 productivity up to 400l/h / +80°C and oil burner capacity. 48kw. Size 1000x1000x1200mm, weight 280kg. The set includes a juice pump and a fully automatic control center..

Stainless (Country of manufacture: Slovenia) pasteurizer with productivity up to 180l/h. A bottle bottler or bag-in-box bottler is available as an accessory. Electric power 18kw. Fully automatic - automatic on/off of the set temperature..

Pasteurizers are equipped with spiral heat exchangers and a hot water circulation pump. The juice tube is located inside the hot water tube with a larger diameter - hot water and the juice to be pasteurized move in opposite directions to each other, ensuring even heating of the juice. The power of the pasteurizer is stepwise adjustable according to the number of working heaters. The thermostat ensures the maintenance of the hot water temperature set by the user, which should be 4-5 degrees warmer than the temperature of the juice coming out. The EHA18E, EHA27E and EHA45E models are equipped with a juice pump and the ability to automatically adjust the juice temperature. Pasteurizer EHA-18E productivity up to 200l/h and power is 18kw (2x9kw) 400V/32A. Warm-up time approx. 15 min. Dimensions 750x500x1150 mm, weight 150 kg. Complete device with juice pump and automatic juice/raw temperature control.

Pasteurizers are equipped with spiral heat exchangers and a hot water circulation pump. The juice tube is located inside the hot water tube with a larger diameter - hot water and the juice to be pasteurized move in opposite directions to each other, ensuring even heating of the juice. The power of the pasteurizer is stepwise adjustable according to the number of working heaters. The thermostat ensures the maintenance of the hot water temperature set by the user, which should be 4-5 degrees warmer than the temperature of the juice coming out. In the case of EHA18, EHA27 and EHA45 models, setting the juice temperature is by changing the flow rate using a manually adjustable valve, an external pump is required to supply the raw juice. EHA18E, EHA27E and EHA45E are equipped with a juice pump and the ability to automatically adjust the temperature of the juice. Pasteurizer EHA-27E productivity up to 300l/h / +80°C and power is 27kw (3x9kw) 400V/63A. Warm-up time approx. 10 min. Size 750x850x1400mm, weight 180kg..

Pasteurizers are equipped with spiral heat exchangers and a hot water circulation pump. The juice tube is located inside a larger diameter hot water tube - hot water and juice to be pasteurized move in opposite directions to each other, ensuring uniform heating of the juice. The power of the pasteurizer is stepwise adjustable according to the number of working heaters. The thermostat ensures the maintenance of the hot water temperature set by the user, which should be 4-5 degrees warmer than the temperature of the juice coming out. In the case of EHA18, EHA27 and EHA45 models, setting the juice temperature is by changing the flow rate using a manually adjustable valve, an external pump is required to feed the raw juice. EHA18E, EHA27E and EHA45E are equipped with a juice pump and the ability to automatically adjust the temperature of the juice. Pasteurizer EHA-45E productivity up to 450l/h / +80°C and power is 45kw 400V. Warm-up time approx. 8 min. Size 750x850x1400mm, weight 230kg. Setting the temperature of the juice by changing the flow rate using a manually adjustable valve, an external pump is required to supply the raw juice..

Rental device. The price for the weekend is 35 eur..

Stainless Italian-made capping machine for various T-shaped and cylindrical caps, also caps made of cork wood. Suitable Caps: Top Head Diam. 28-30mm and height 10-20mm and the lower part entering the bottle neck diam. 18-19mm and height 18-22mm. The device can also be set up for caps of other sizes, which is preceded by a factory check with the customer's caps. Before capping, the cap is placed in the slot and the bottle is installed. Suitable bottle height up to 375mm. One operation lasts 3 seconds. The device works with compressed air 3-4bar. ACCESSORIES: Device on wheels..

The very energy-efficient direct cooling device AS-200 is a new and complete model for cooling drinks. The standard device has a 2-spiral... for cooling two different drinks. Cooling capacity up to 200l/h, ice bank 20kg/58l, weight 51kg. Cools the liquid to +2...+6C. Power 1380W, ice bank 10-30kg, dimensions 610x530x420mm. The set also includes quick connectors with 1/2" internal thread for making various connections..

RENTAL DEVICE: Semi-automatic bag in box bottling device that allows bottling up to 7000l/h. The device is suitable for small entrepreneurs who bottle approx. 5000 bags per year. Pre-settable dispenser automation (electromagnetic pre-set meter). The possibility of adjusting the bottling height makes the work easier. Bottling takes place under pressure. Work process: the operator removes the cap -> autofill -> the operator closes the cap. additional information: minimum dosage for 1L calibration. Accuracy +/- 5...10cl; also suitable for bottling canisters (max. D85mm); max. working temperature +80C; The use of different sensors ensures the possibility of bottling different liquids such as juice, wine, oil, etc. Please let me know when ordering! ; Easy to clean and maintain, as the piping simply opens... also possible to sterilize with steam +110C (accessory). Extras: pump, sterilization with steam +110C. Bottler and buffer container with work surface included. Manufacturer: Enoitalia (Italy)..

RENTAL MACHINE. LONG-TERM RENTAL PERIOD BY AGREEMENT. Equipped with two shaking heads BOS. The harvester is designed for picking black and red currants, the branches of gooseberry and rosehip bushes are winding and dense and require double shaking. Transport from the manufacturer's warehouse at an additional cost! Cider Mill OÜ is the official representative of Jagoda products in Estonia! JAREK 5/ ARONIC/JAREK 5H and JAREK 5R are newer models of tractor-mounted semi-row harvesters designed for harvesting berries such as black currants, red and yellow currants, gooseberries, chokeberry, haskap, autumn fruit raspberries, saskaton berries. & rose hips. Our semi-row combines are characterized by high-quality finish, full equipment, simple construction and easy operation. The modular construction allows to adapt the harvesters according to the customer's needs and different picking conditions. We guarantee the highest standards in terms of harvesting precision and performance, the JAGODA half-row harvester is the best-seller in Europe thanks to: ▪ The modular design allows the machine to be equipped with different configurations, which adds high value to the standard version and improves cost efficiency. . The standard model is equipped with: - 2 innovative and exclusive shaking heads for the 920 JAREK 5, 1 shaking head for the JAREK 5R and ARONIC, which ensure the proper operation of the machine and are much gentler on the bushes than normal shaking heads. Shaking head 920 can be adjusted by changing the shaking force of the rotating weight mass to be used on different berries. - Hydraulic steering axle, which gives a very good turning radius and is especially important for reverse turns - Protective roof - Platform for collecting fruit: in small boxes (10 kg) / pallets (500 kg) - No additional accessories are needed for low bushes, our harvester stands out with a unique design that allows " "sun-shaped" shaking elements should be installed as low as possible. Thanks to this solution, fruit can be collected even from young and low bushes without additional equipment - Hydraulic drives, fully adjustable drives of the working elements - Low and easy maintenance: innovative chain protection system against excessive stretching / Magnetically closed shaker covers for easy access to the shakers and trouble-free maintenance - 7 plastic/metal single or double sun-shaped shaking element. The plastic elements have better elasticity, are more durable and do not damage the bushings - The mechanical collector guides the low branches to the conveyor - The rotary connection on the harvester to the tractor hitch - The design allows to adapt the harvester according to the customer's needs in different planting conditions - Hydraulic drives, fully adjustable drives of the working elements Extras: - Hydraulic leveling wheels Recommended for efficient work on perpendicular slopes 3 ° to 12°. - Brakes: recommended for efficient work on cross slopes 1° to 2° - Hydraulic slide beam: adjust the combine inside the tractor by raising and lowering and moving it right/left. ( 4 directions) - Oil cooler: Recommended for continuous operation, especially in hot climates. - Wireless/ radio control panel (up to 80 meters) - Electrovalve control: necessary to control various optional functions from the tractor - Hydraulic first guide: In the standard version, our harvester is equipped with a mechanical one - Gooseberry covers: necessary for harvesting gooseberries or other berries due to the peculiarity of the gooseberry fruit, which is in contact very prone to splintering with shaking elements. - Rear platform deck extension by 60 cm. - Work light on platform / set of tealights - 3 types of shaker heads for different fruits - High vibration energy ARONIC for chokeberry - 920: Adjust with mass shaker for Haskap and raspberries - BOS shaker: for currants, rose hips, gooseberries and saskatons Specifications: trailed, 1/2 row harvester , 2-BOS shaker, picking speed 0.6-1.5km/h (0.1-0.2ha/h), transport speed 20km/h, picking, picking accuracy up to 99%, injuries < 1%, required labor - from tractor and operator, tractor Min 30 Hp / 300 rpm. Dimensions: height 2.5m, length 6.1m, width 2.6m and weight 1950kg..