Pressure reducer CO2 2-way W21,8 MM

Filled CO2 cylinder (min. 50bar). Size 8L/6kg; pressure max. 200 bar; dimensions 136x820mm, weight 16.5kg. A reducer with an input thread of 21.8mm is suitable. Keere The protective cover protects the valve from damage during transport or storage. The cylinder and valve are manufactured according to EN 1964: 1999 and are π-marked for ADR / RID compliance. Balloons can be filled at our Pärnu unit. Also buy a CO2 reducer.

Filled CO2 cylinder (min.50bar). Size 2L/1.5kg; pressure max. 150 bar. dimensions ø100 x 435, weight 5kg. The cylinder and valve are manufactured according to EN 1964: 1999 and are π-marked for ADR / RID compliance. Balloons can be filled/sent to our address in Pärnu. Also buy a CO2 reducer.

Bring the CO2 cylinder we sold back to us and you will immediately receive a new one filled..

Return our sold CO2 cylinder to us and you will immediately receive a new filled cylinder. When purchasing a cylinder filling in the e-store, it is assumed that you send the empty cylinder to us by courier first..

Cooler with compressor is suitable for Keykegs 2.8...3.2bar. After connecting to the mains, the device is ready for operation in 2..4 minutes. Temperature range +2...+10C. Cooling capacity 30l/h, with 1 outlet tap, cooling pipe 13.5jm, dimensions: 170x280x325mm, weight: 13kg, power consumption 267W/230V/50Hz/1.16A. connecting hoses: John Guest 3/8. When using a cooler, it is necessary to purchase additional pipe and tank fittings. The pressure from the CO2 cylinder is approx. 2.5...2.9bar if you use a metal barrel.

After connecting to the mains, the device is ready for operation in 2..4 minutes. Temperature range +2...+10C. Cooling capacity 30l/h, with 1 outlet tap, cooling pipe 13.5jm, dimensions: 170x280x325mm, weight: 13kg, power consumption 267W/230V/50Hz/1.16A. connecting hoses: John Guest 3/8 When using a cooler, it is necessary to purchase additional pipe and tank fittings. The pressure from the CO2 cylinder is approx. 2.5...2.9 bar..

Cooler with compressor is suitable for Keykegs 2.8...3.2bar. After connecting to the mains, the device is ready for operation in 5..8 minutes. Temperature range +2...+10C. Cooling capacity 35-40l/h (max. 50l/h), with 2-output tap, cooling pipes 14jm, dimensions: 210x331xh465mm, Weight: 29.3kg, power consumption 1100W/230V/50Hz/1.16A. connecting hoses: John Guest 5/8. When using a cooler, it is necessary to purchase additional pipe and tank fittings. The pressure from the CO2 cylinder is approx. 2.5...2.9bar if you use a metal barrel.

Cooler with an exclusive and nice design with 2 outputs, which also includes design lighting integrated into the housing. Cooler with compressor is suitable for Keykegs 2.8...3.2bar. After connecting to the mains, the device is ready for operation in 2..4 minutes. Temperature range +2...+10C. Cooling capacity 30l/h, with 1 outlet tap, cooling pipe 13.5jm, dimensions: 185x300x345mm, weight: 16.5kg, power consumption 267W/230V/50Hz/1.16A. connecting hoses: John Guest 3/8. When using a cooler, it is necessary to purchase additional pipe and tank fittings. The pressure from the CO2 cylinder is approx. 2.5...2.9bar if you use a metal barrel.

Beverage cooler without compressor. After connecting to the mains, the device is ready for operation in 5..8 minutes. Temperature range +2...+10C. Cooling capacity 35-40l/h (max. 50l/h), with 2-output tap, cooling pipes 14jm, dimensions: 225x330xh425mm, Weight: 26kg, power consumption 1100W/230V/50Hz/1.16A. connecting hoses: John Guest 5/8. When using a cooler, it is necessary to purchase additional pipe and tank fittings. The pressure from the CO2 cylinder is approx. 2.5...2.9 bar..

The luxury beer cooler SOUDEK 50 is designed for cooling and serving chilled beer or wine in home and commercial use. The model allows serving up to three drinks. A high-quality device covered with stainless steel and oak wood. Accessories and a visually nice design stand out both in home use and in a bar. HIGHER OUTPUT - The SOUDEK 50 chiller has a continuous performance of 40-50 l/hour allowing to provide about 80-100 well-chilled drinks in one hour. Design - luxurious and elegant appearance of well-processed oak with stainless steel accessories. EASY TO USE - easy and safe handling thanks to the small dimensions of the device. DEVICE - a part of the standard equipment is a thermostat, which allows you to easily adjust the temperature of the drink. The pressure from the CO2 cylinder is approx. 2.5...2.9bar (accessory)..

The luxury beer cooler SOUDEK 50 is designed for cooling and serving chilled beer or wine in home and commercial use. The model allows serving up to two drinks. A high-quality device covered with stainless steel and oak wood. Accessories and a visually nice design stand out both in home use and in a bar. HIGHER OUTPUT - The SOUDEK 50 chiller has a continuous performance of 40-50 l/hour allowing to provide about 80-100 well-chilled drinks in one hour. Design - luxurious and elegant appearance of well-processed oak with stainless steel accessories. EASY TO USE - easy and safe handling thanks to the small dimensions of the device. DEVICE - a part of the standard equipment is a thermostat, which allows you to easily adjust the temperature of the drink. Pressure from CO2'he cylinder (accessory) approx. 2.5...2.9 bar..

Cooler with compressor is suitable for Keykegs 2.8...3.2bar. After connecting to the mains, the device is ready for operation in 2..4 minutes. Temperature range +2...+10C. Cooling capacity 25l/h, with 1 outlet tap, cooling pipe 10.5jm, dimensions: 185x315x325mm, weight: 16.5kg, power consumption 230V/50Hz/1.16A. connecting hoses: John Guest 3/8. When using a cooler, it is necessary to purchase additional pipe and tank fittings. The pressure from the CO2 cylinder is approx. 2.5...2.9bar if you use a metal barrel..

Single-stage CO2 cylinder regulator-regulator with variable output pressure control. Allows the gases leaving the cylinder to be depressurized to the required level/pressure and ensures that the pressure is kept as constant as possible at the outlet... regardless of the change in inlet pressure. The regulator is equipped with a safety valve through which excess gas released from the exhaust pressure chamber exits. One monometer indicates the level of compressed air in the CO2 cylinder and the other in the output piping. For example, if you want to pressurize your tank with 3bar, the manometer must be in the position 10l/min, and for 2bar, 7l/min. Bar / l/min unit conversion table included. Technical data: input pressure 185bar, output pressure 0.5-10bar, output capacity 15m3/h, input thread W21.8x1 1 14, output nut thread G1/4 and pipe connection 6.3mm. 

CO2 cylinder regulator-reducer with variable output pressure regulation. Enables lowering the pressure of the gases leaving the cylinder to the required working level pressure and ensures that the pressure is kept automatically and as constant as possible - regardless of changes in the inlet pressure. The regulator is equipped with a safety valve. One monometer indicates the level of compressed air in the CO2 cylinder and the other in the output piping. The pressures of the output pipelines are separately adjustable. Technical data: input thread W21.8x1 1 14 (connection to cylinder). Buy more hose connectors if necessary..

Regulator-reducer for two different output CO2 cylinders with variable output pressure regulation. Enables lowering the pressure of the gases leaving the cylinder to the required working level pressure and ensures that the pressure is kept automatically and as constant as possible - regardless of changes in the inlet pressure. The regulator is equipped with a safety valve. One monometer indicates the level of compressed air in the CO2 cylinder and the other in the output piping. The pressures of the output pipelines are separately adjustable. Technical data: input thread W21.8x1 1 14 (connection to cylinder). Buy more hose connectors if necessary..

Single-stage cylinder reducer with a rated inlet pressure of 200 bar and outlet pressure regulation. It allows you to reduce the pressure of gases taken from the cylinder to the required outlet (working) pressure and ensures that this pressure is automatically maintained at a possibly constant level, regardless of changes in the inlet pressure.

The set includes an outlet valve, a 100cm hose, 2 clamps and a ball-lock quick connector for the KEG tank..

19L pressure tank lid gasket - only the gasket with a diameter of 95mm from the middle of the gasket.

Accessory for pressure regulator, convenient to share CO2 pressure equally on two outputs. Compatible with pressure regulators in our range (product codes: 9001197 and 9000507)..

Nukatap vanetile grommet.

This all-new ball lock disconnect sets a new standard! The integrated duotight design allows you to connect your beer and gas lines directly, easily, and reliably without needing additional fittings or clamps. Its robust and super-compact design is incredibly easy to assemble and disassemble, making cleaning and sanitizing effortless. Made from highly chemical-resistant materials with stainless steel springs and ball bearings—no cheap ABS plastics here—this ball lock is extremely resistant to commonly used chemicals like phosphoric-based sanitizers and caustics. The small size makes it easy to stack kegs, and the new cap design ensures a pressure seal with just hand tightening. It can be completely disassembled for cleaning without any tools. The durable and compact design makes this the best value and the most well-designed quick disconnect for home brewing ever made. This specific ball lock disconnect is designed for an 8 mm gas line, and thanks to the integrated duotight fitting, the line simply pushes directly into place.