Pasteurizer PS 180E 180L/H 18kw

Stainless pasteurizer, to which you can purchase either a storage bag bottler with a productivity of up to 180l/h (+20C to +80C) or a bottle bottler - one of the selected bottlers is included in the price of the device. Electric power 18kw/400V/32A. Dimensions: 750x2050x1170 mm.

Stainless (Country of manufacture: Slovenia) pasteurizer with productivity up to 140l/h. A bottle bottler or bag-in-box bottler is available as an accessory. Electric power 12kw. Fully automatic - automatic on/off of the set temperature..

For the heat treatment of different fruits (apple, pear, blackberry, strawberry, blueberry, elderberry, currant, carrot, herbs, quince, beetroot, sea buckthorn, rowan berries, onion) suitable electric pasteurizer. Temperature checks at two points, in the heat exchanger and once on the outlet. The machine automatically controls the heat exchanger temperature. It is fully automatic. If the temperature of the juice to be pasteurized falls below the desired temperature, the output side of the machine is disabled and the juice circulates in the by-pass system until the temperature reaches the set level. The machine then starts charging again. At the end of the work, the tube spiral can be cleaned very easily with the help of a sponge ball. It requires minimal maintenance.Specifications:-Performance: 300 L/h (From 20°C to 80°C)-Electric demands: 28 kW, 400 V, 32 A, triphase-Material: WNr. 1.4301, AISI 304 stainless steel-Dimensions: 1480x1120x1940 mm-Weight: 230 kgSize: Length: 1539 mm, Width:    642 mm, Height:  1850 mm-IP65 certified electronics-Heat exchanger: soft water-Connections: DN 25-Level indicators for water and juice-Thermometers: 2 pcs-Automatic heat control, very easy to clean. Automatic operation – flowthrough type.-Requires minimal maintenance.Options:-Available options:-BiB OR bottle filler modules-Manual BiB filler with digital scale OR two head bottle filler moduleAccessories:  - Sponge balls for cleaning 

Pasteurizers are equipped with spiral heat exchangers and a hot water circulation pump. The juice tube is located inside the hot water tube with a larger diameter - hot water and the juice to be pasteurized move in opposite directions to each other, ensuring even heating of the juice. The power of the pasteurizer is stepwise adjustable according to the number of working heaters. The thermostat ensures the maintenance of the hot water temperature set by the user, which should be 4-5 degrees warmer than the temperature of the juice coming out. In the case of EHA18, EHA27 and EHA45 models, setting the juice temperature is by changing the flow rate using a manually adjustable valve, an external pump is required to supply the raw juice. EHA18E, EHA27E and EHA45E are equipped with a juice pump and the ability to automatically adjust the temperature of the juice. Pasteurizer EHA-18 productivity up to 200l/h and power is 18kw (2x9kw) 400V/32A. Warm-up time approx. 15 min. Dimensions 750x500x1150 mm, weight 150 kg. Setting the temperature of the juice by changing the flow rate using a manually adjustable valve, an external pump is required to supply the raw juice..

Pasteurizers are equipped with spiral heat exchangers and a hot water circulation pump. The juice tube is located inside the hot water tube with a larger diameter - hot water and the juice to be pasteurized move in opposite directions to each other, ensuring even heating of the juice. The power of the pasteurizer is stepwise adjustable according to the number of working heaters. The thermostat ensures the maintenance of the hot water temperature set by the user, which should be 4-5 degrees warmer than the temperature of the juice coming out. In the case of EHA18, EHA27 and EHA45 models, setting the juice temperature is by changing the flow rate using a manually adjustable valve, an external pump is required to supply the raw juice. EHA18E, EHA27E and EHA45E are equipped with a juice pump and the ability to automatically adjust the temperature of the juice. Pasteurizer EHA-27 productivity up to 300l/h / +80°C and power is 27kw (3x9kw) 400V/63A. Warm-up time approx. 10 min. Size 750x500x1400mm, weight 150kg. Setting the temperature of the juice by changing the flow rate using a manually adjustable valve, an external pump is required to supply the raw juice..

Pasteurizer EHA-45 productivity up to 450l/h / +80°C and power is 45kw 400V/80A. Warm-up time approx. 8 min. Size 750x500x1400mm, weight 200kg. Setting the temperature of the juice by changing the flow rate using a manually adjustable valve, an external pump is required to supply the raw juice..

Pasteurizers are equipped with spiral heat exchangers and a hot water circulation pump. The juice tube is located inside the hot water tube with a larger diameter - hot water and the juice to be pasteurized move in opposite directions to each other, ensuring even heating of the juice. The power of the pasteurizer is stepwise adjustable according to the number of working heaters. The thermostat ensures the maintenance of the hot water temperature set by the user, which should be 4-5 degrees warmer than the temperature of the juice coming out. In the case of EHA18, EHA27 and EHA45 models, setting the juice temperature is by changing the flow rate using a manually adjustable valve, an external pump is required to supply the raw juice. EHA18E, EHA27E and EHA45E are equipped with a juice pump and the ability to automatically adjust the temperature of the juice. Pasteurizer EHA-40 productivity up to 400l/h / +80°C and oil burner capacity. 48kw. Size 1000x1000x1200mm, weight 280kg. The set includes a juice pump and a fully automatic control center..

Pasteurizers are equipped with spiral heat exchangers and a hot water circulation pump. The juice tube is located inside the hot water tube with a larger diameter - hot water and the juice to be pasteurized move in opposite directions to each other, ensuring even heating of the juice. The power of the pasteurizer is stepwise adjustable according to the number of working heaters. The thermostat ensures the maintenance of the hot water temperature set by the user, which should be 4-5 degrees warmer than the temperature of the juice coming out. The EHA18E, EHA27E and EHA45E models are equipped with a juice pump and the ability to automatically adjust the juice temperature. Pasteurizer EHA-18E productivity up to 200l/h and power is 18kw (2x9kw) 400V/32A. Warm-up time approx. 15 min. Dimensions 750x500x1150 mm, weight 150 kg. Complete device with juice pump and automatic juice/raw temperature control.

Pasteurizers are equipped with spiral heat exchangers and a hot water circulation pump. The juice tube is located inside the hot water tube with a larger diameter - hot water and the juice to be pasteurized move in opposite directions to each other, ensuring even heating of the juice. The power of the pasteurizer is stepwise adjustable according to the number of working heaters. The thermostat ensures the maintenance of the hot water temperature set by the user, which should be 4-5 degrees warmer than the temperature of the juice coming out. In the case of EHA18, EHA27 and EHA45 models, setting the juice temperature is by changing the flow rate using a manually adjustable valve, an external pump is required to supply the raw juice. EHA18E, EHA27E and EHA45E are equipped with a juice pump and the ability to automatically adjust the temperature of the juice. Pasteurizer EHA-27E productivity up to 300l/h / +80°C and power is 27kw (3x9kw) 400V/63A. Warm-up time approx. 10 min. Size 750x850x1400mm, weight 180kg..

Pasteurizers are equipped with spiral heat exchangers and a hot water circulation pump. The juice tube is located inside the hot water tube with a larger diameter - hot water and the juice to be pasteurized move in opposite directions to each other, ensuring even heating of the juice. The power of the pasteurizer is stepwise adjustable according to the number of working heaters. The thermostat ensures the maintenance of the hot water temperature set by the user, which should be 4-5 degrees warmer than the temperature of the juice coming out. In the case of EHA18, EHA27 and EHA45 models, setting the juice temperature is by changing the flow rate using a manually adjustable valve, an external pump is required to feed the raw juice. EHA18E, EHA27E and EHA45E are equipped with a juice pump and the ability to automatically adjust the temperature of the juice. Pasteurizer EHA-18E productivity up to 200l/h and power is 18kw (2x9kw) 400V/32A. Warm-up time approx. 15 min. Dimensions 750x500x1150 mm, weight 150 kg. Complete device with juice pump and automatic juice/raw temperature control.

Pasteurizers are equipped with spiral heat exchangers and a hot water circulation pump. The juice tube is located inside a larger diameter hot water tube - hot water and juice to be pasteurized move in opposite directions to each other, ensuring uniform heating of the juice. The power of the pasteurizer is stepwise adjustable according to the number of working heaters. The thermostat ensures the maintenance of the hot water temperature set by the user, which should be 4-5 degrees warmer than the temperature of the juice coming out. In the case of EHA18, EHA27 and EHA45 models, setting the juice temperature is by changing the flow rate using a manually adjustable valve, an external pump is required to feed the raw juice. EHA18E, EHA27E and EHA45E are equipped with a juice pump and the ability to automatically adjust the temperature of the juice. Pasteurizer EHA-45E productivity up to 450l/h / +80°C and power is 45kw 400V. Warm-up time approx. 8 min. Size 750x850x1400mm, weight 230kg. Setting the temperature of the juice by changing the flow rate using a manually adjustable valve, an external pump is required to supply the raw juice..

Stainless pasteurizer, to which you can purchase either a storage bag bottler with a productivity of up to 180l/h (+20C to +80C) or a bottle bottler - one of the selected bottlers is included in the price of the device. Electric power 18kw/400V/32A. Dimensions: 750x2050x1170 mm.

Stainless (Country of manufacture: Slovenia) pasteurizer with productivity up to 140l/h. A bottle bottler or bag-in-box bottler is available as an accessory. Electric power 12kw. Fully automatic - automatic on/off of the set temperature..

For the heat treatment of different fruits (apple, pear, blackberry, strawberry, blueberry, elderberry, currant, carrot, herbs, quince, beetroot, sea buckthorn, rowan berries, onion) suitable electric pasteurizer. Temperature checks at two points, in the heat exchanger and once on the outlet. The machine automatically controls the heat exchanger temperature. It is fully automatic. If the temperature of the juice to be pasteurized falls below the desired temperature, the output side of the machine is disabled and the juice circulates in the by-pass system until the temperature reaches the set level. The machine then starts charging again. At the end of the work, the tube spiral can be cleaned very easily with the help of a sponge ball. It requires minimal maintenance.Specifications:-Performance: 300 L/h (From 20°C to 80°C)-Electric demands: 28 kW, 400 V, 32 A, triphase-Material: WNr. 1.4301, AISI 304 stainless steel-Dimensions: 1480x1120x1940 mm-Weight: 230 kgSize: Length: 1539 mm, Width:    642 mm, Height:  1850 mm-IP65 certified electronics-Heat exchanger: soft water-Connections: DN 25-Level indicators for water and juice-Thermometers: 2 pcs-Automatic heat control, very easy to clean. Automatic operation – flowthrough type.-Requires minimal maintenance.Options:-Available options:-BiB OR bottle filler modules-Manual BiB filler with digital scale OR two head bottle filler moduleAccessories:  - Sponge balls for cleaning 

Pasteurizers are equipped with spiral heat exchangers and a hot water circulation pump. The juice tube is located inside the hot water tube with a larger diameter - hot water and the juice to be pasteurized move in opposite directions to each other, ensuring even heating of the juice. The power of the pasteurizer is stepwise adjustable according to the number of working heaters. The thermostat ensures the maintenance of the hot water temperature set by the user, which should be 4-5 degrees warmer than the temperature of the juice coming out. The EHA18E, EHA27E and EHA45E models are equipped with a juice pump and the ability to automatically adjust the juice temperature. Pasteurizer EHA-18E productivity up to 200l/h and power is 18kw (2x9kw) 400V/32A. Warm-up time approx. 15 min. Dimensions 750x500x1150 mm, weight 150 kg. Complete device with juice pump and automatic juice/raw temperature control.

Pasteurizers are equipped with spiral heat exchangers and a hot water circulation pump. The juice tube is located inside the hot water tube with a larger diameter - hot water and the juice to be pasteurized move in opposite directions to each other, ensuring even heating of the juice. The power of the pasteurizer is stepwise adjustable according to the number of working heaters. The thermostat ensures the maintenance of the hot water temperature set by the user, which should be 4-5 degrees warmer than the temperature of the juice coming out. In the case of EHA18, EHA27 and EHA45 models, setting the juice temperature is by changing the flow rate using a manually adjustable valve, an external pump is required to supply the raw juice. EHA18E, EHA27E and EHA45E are equipped with a juice pump and the ability to automatically adjust the temperature of the juice. Pasteurizer EHA-27E productivity up to 300l/h / +80°C and power is 27kw (3x9kw) 400V/63A. Warm-up time approx. 10 min. Size 750x850x1400mm, weight 180kg..