Maxi 80 stainless steel plate

The Maxi 80 heat exchanger is made of AISI 304 stainless steel (18/10). Complete with stainless steel interface F 1 "¼ and 3/4" M and 4 stainless steel hose connections with 20 mm 3/4 "F nut (as in the picture). Professional model suitable for transferring the temperature of one fluid to another fluid. Heat exchange is carried out by the stainless steel plates of the heat exchanger without the two fluids mixing. The device is removable and removable and the seals between the plates ensure perfect isolation. The fluids flow in the opposite direction and thanks to the wavy surface of the plate, it causes a high turbulence of the fluids flowing inside, improving the heat exchange. Complies with European Directive 97/23 / EC (PED). Advantages: high coefficient of heat exchange, LIQUIDS DO NOT MIX, FLEXIBLE (possibility of increasing the plates), DURABILITY thanks to the regeneration of plates and / or replacement of various components. TECHNICAL CHARACTERISTICS: CONNECTIONS 1 "1/4, MAXIMUM WORKING PRESSURE: 10 bar, Plate surface: 0.08 square meters, Plate liquid volume: 0.25L, WEIGHT OF ONE PLATE: 0.5 kg, WEIGHT: 50kg, Number of plates: 22 CLEANING AND SANITIZATION: The device must be cleaned immediately after use to prevent residues from drying and sticking to the walls of the heat exchanger and interior surfaces: first rinse with hot water and then use e.g. OXI or some other basic cleaning agent with warm water. Then rinse again with water. Store the heat exchanger in a clean and dry place. Disinfection is always carried out before the next use: circulate a solution of water and acid cleaner or OXI solution. Warning: Gloves, goggles and a mask are always recommended at this stage..

Heat exchanger clamp for attaching to the ground and fixing, which in turn simplifies the cooling process..

Seal for maxi 80 series replacement plate. Thanks to this spare part, it is possible to easily replace the old seal. This product only contains a gasket.

Made of stainless steel (suitable for nutrients) and laser technology, the surfaces of the heat exchanger are smooth and therefore the device is self-cleaning. In addition, the device can be completely disassembled. By ensuring the amount of cooling or heating water is 2750l/h and the cooled/heated liquid is 900l/h, the temperature difference is 3 degrees. The additional flow must be 3x greater than the raw material flow to ensure the correct temperature. Saves energy costs up to 50%. Heat exchangers of different capacities and sizes are available for quantities up to 21,000 l/h..

Stainless steel (V4A) cooling and heating pipe 2.5 m long..

Stainless steel (suitable for nutrients) 36-plate heat exchanger for heating or cooling. Connection nuts 3/4" external thread. Hose connections for 12mm hose included. For example, it is possible to cool 60L of almost +95C liquid to 20C in 10 minutes if the coolant is +10C..

The Maxi 80 heat exchanger is made of AISI 304 stainless steel (18/10). Complete with stainless steel interface F 1 "¼ and 3/4" M and 4 stainless steel hose connections with 20 mm 3/4 "F nut (as in the picture). Professional model suitable for transferring the temperature of one fluid to another fluid. Heat exchange is carried out by the stainless steel plates of the heat exchanger without the two fluids mixing. The device is removable and removable and the seals between the plates ensure perfect isolation. The fluids flow in the opposite direction and thanks to the wavy surface of the plate, it causes a high turbulence of the fluids flowing inside, improving the heat exchange. Complies with European Directive 97/23 / EC (PED). Advantages: high coefficient of heat exchange, LIQUIDS DO NOT MIX, FLEXIBLE (possibility of increasing the plates), DURABILITY thanks to the regeneration of plates and / or replacement of various components. TECHNICAL CHARACTERISTICS: CONNECTIONS 1 "1/4, MAXIMUM WORKING PRESSURE: 10 bar, Plate surface: 0.08 square meters, Plate liquid volume: 0.25L, WEIGHT OF ONE PLATE: 0.5 kg, WEIGHT: 50kg, Number of plates: 22 CLEANING AND SANITIZATION: The device must be cleaned immediately after use to prevent residues from drying and sticking to the walls of the heat exchanger and interior surfaces: first rinse with hot water and then use e.g. OXI or some other basic cleaning agent with warm water. Then rinse again with water. Store the heat exchanger in a clean and dry place. Disinfection is always carried out before the next use: circulate a solution of water and acid cleaner or OXI solution. Warning: Gloves, goggles and a mask are always recommended at this stage..

Seal for maxi 80 series replacement plate. Thanks to this spare part, it is possible to easily replace the old seal. This product only contains a gasket.

Heat exchanger clamp for attaching to the ground and fixing, which in turn simplifies the cooling process..

Made of stainless steel (suitable for nutrients) and laser technology, the surfaces of the heat exchanger are smooth and therefore the device is self-cleaning. In addition, the device can be completely disassembled. Ensuring the amount of cooling or heating/cooling water is 15,840l/h and the liquid to be cooled/heated is 5,440l/h, the temperature difference is 4 degrees. The additional flow must be 3x greater than the raw material flow to ensure the correct temperature. Saves energy costs up to 50%. Heat exchangers of different capacities and sizes are available for quantities up to 21,000 l/h..

The Maxi 80 heat exchanger is made of AISI 304 stainless steel (18/10). Complete with stainless steel interface F 1 "¼ and 3/4" M and 4 stainless steel hose connections with 20 mm 3/4 "F nut (as in the picture). Professional model suitable for transferring the temperature of one fluid to another fluid. Heat exchange is carried out by the stainless steel plates of the heat exchanger without the two fluids mixing. The device is removable and removable and the seals between the plates ensure perfect isolation. The fluids flow in the opposite direction and thanks to the wavy surface of the plate, it causes a high turbulence of the fluids flowing inside, improving the heat exchange. Complies with European Directive 97/23 / EC (PED). Advantages: high coefficient of heat exchange, LIQUIDS DO NOT MIX, FLEXIBLE (possibility of increasing the plates), DURABILITY thanks to the regeneration of plates and / or replacement of various components. TECHNICAL CHARACTERISTICS: CONNECTIONS 1 "1/4, MAXIMUM WORKING PRESSURE: 10 bar, Plate surface: 0.08 square meters, Plate liquid volume: 0.25L, WEIGHT OF ONE PLATE: 0.5 kg, WEIGHT: 50kg, Number of plates: 60 - capacity approx. 80kw CLEANING AND SANITIZING: The device must be cleaned immediately after use to prevent residues from drying and sticking to the walls and internal surfaces of the heat exchanger: first rinse with hot water and then use e.g. OXI or some other basic cleaning agent with warm water. Then rinse again with water. Store the heat exchanger in a clean and dry place. Disinfection is always carried out before the next use: circulate a solution of water and acid cleaner or OXI solution. Warning: Gloves, goggles and a mask are always recommended at this stage..

The pasteurizer used to heat liquid, low viscosity foods, and equipment for heat treatment of drinking water. The machine has been designed accordance with security requirements. The heat exchanger does the heat treatment by a fitted stainless steel tube.The heat is provided by a gas or fuel oil boiler. The heating water temperature is controlled by the boiler. The temperature of the treated liquid is controlled by a by-pass valve. Temperature check at two points, in the heat exchanger and once on the outlet. The machine automatically controls the heat exchanger temperature. The pasteurizer works automatically. If the temperature of the juice falls below the desired temperature, the machine disabled and the juice circulates in the by-pass system until the temperature reaches the set level. Thereafter the machine let the filling. At the end of the work, the tube spiral can be cleaned very easily with the help of a sponge ball. It requires minimal maintenance.Technical details:-Performance: 700 L/h (When heated from 20 °C to 80 °C)-Electric demands: 800W , 230 V, 6 A-Heat performance: 70 kW -Fuel: propane, PB, natural gas-Material: Wnr. 1.4301, AISI 304 stainless steel-Weight: 350 kgDimensions: Length: 850 mm, Width:  690 mm, Height: 1700 mm-IP65 certified electronics-Connections: DN 25-Flue gas discharge:: 110 mm diameter-Automatic temperature control-Automatic  by-pass rendszer-Easy to clean with sponge balls-Requires minimal maintenanceOption:- Optinal buffer tank (it can be placed above the pasteurizer).The buffer tank is fully automatic and communicates with the pasteurizer. If the juice is too low, The system will automatically shut down temporarily, until the process starts again. It can work with both bottle filler at the same time. - Semi-automatic Bag in Box filler: MKBiB Top 180 filler - 6 headed bottle filler moduleAccessories: - Sponge balls for cleaning

High-quality instant pasteur made in Slovenia. Technical data: Productivity 60-90l/h, Dimensions height 1800mm, Ø400, Pasteurization 75-85 C, Power 6kw/380V, Automation: adjustable digital thermostat for determining heating water heat and manual for visual control.

Fermflex mobile temperature controller for fermentation tanks. Full digital temperature control with sensor and agnet valve in a compact and robust housing to facilitate fermentation and fermentation in fermentation tanks. Thanks to its compact design and handles, the control knob is easy to move and can be used for multiple tanks or as a permanent controller for one tank if needed. Can be used in a network of multiple controllers and is operated via an optional PC software package. Display-display for current and set temperatures and optical signal; the set includes a PC interface (BUS); adjustable cooling/heating/cooling and heating; magnetic valve included in the set for connecting the cooling / heating source (1/2); temperature sensor with 8 meter long cable; IP65, 24 V, power supply 230 V, including 5 meter long cable; temperature range: -9.99 ... +99.9 ° C, scale 0.1 ° C; 3-point PI/PID setting.

Pasteurizers are equipped with spiral heat exchangers and a hot water circulation pump. The juice tube is located inside the hot water tube with a larger diameter - hot water and the juice to be pasteurized move in opposite directions to each other, ensuring even heating of the juice. The power of the pasteurizer is stepwise adjustable according to the number of working heaters. The thermostat ensures the maintenance of the hot water temperature set by the user, which should be 4-5 degrees warmer than the temperature of the juice coming out. In the case of EHA18, EHA27 and EHA45 models, setting the juice temperature is by changing the flow rate using a manually adjustable valve, an external pump is required to supply the raw juice. EHA18E, EHA27E and EHA45E are equipped with a juice pump and the ability to automatically adjust the temperature of the juice. Pasteurizer EHA-27 productivity up to 300l/h / +80°C and power is 27kw (3x9kw) 400V/63A. Warm-up time approx. 10 min. Size 750x500x1400mm, weight 150kg. Setting the temperature of the juice by changing the flow rate using a manually adjustable valve, an external pump is required to supply the raw juice..

Pasteurizer for cold and closed bottles with insulated chamber. On top of the device is a water collector from which hot water pours onto the bottles, pasteurizing the bottles according to the specified temperature. The temperature sensor is placed in a special test bottle. The set includes a basket trolley for bottles, 1pc for 360 1l bottles. Automatic temperature control with water and product sensor. Heat supply from the customer's heating boiler. Capacity/productivity: 360 pcs. 1l bottles/h. Heating power: customer's heating system min. 36kW, Power supply: 400V / 16A / 1.5 kW, Dimensions: 200x1800x2500mm, Weight: 650 kg.