INOX wine tank 600 l

Hand pump to fill the tank floating lid seal..The size of the tank can vary up to max. +/-10%

Vaseline stainless steel container for sealing floating lids or lubricating seals. Vaseline oil is poured over juice or wine - the oil forms a layer on top of the drink that prevents air from coming into contact with the juice and protects the drink from fermentation. By using a floating lid with an oil seal, the apple juice also stays fresh for several months. The oil always remains on the surface of the juice, because it is lighter than the juice and thus does not mix with the juice. Vaseline oil is tasteless, odorless, colorless and has an unlimited shelf life. The oil is tasteless, odorless, transparent and has an unlimited shelf life..

Water-air lock for a large tank for fermenting the product..

Tank on stainless legs for wine fermentation and/or short-term storage with cooling jacket. The set includes: cooling jacket 0.91m2/400mm, legs; conical base; bottom valve 1"; sampling valve 1/2"; upper valve 5/4", upper spring cover, floating dust cover, dust cover, thermometer and level indicator. Dimensions: diameter 794mm and height 1320mm..The size of the tank can vary up to max. +/-10%

600L plastic closed cone container conforming to food standards. Well suited for fermentation and storage of products. The set includes: tank 600L; painted metal base frame (RAL3009); 1. Cover with ventilation; 2. side outlet 1" thread; 3. lower valve 2" thread. Additional options: open from the top (without a hatch), open from the top and a wide low container, with a frame from the top... the possibility to attach a mixer and insert from the top through the hatch,.

Stainless open cone bottom (10 degree) container with mixer. The size of the tank is 700L; Diameter: 955mm; Height: 1020mm, total height 1700mm; valve DN50; Stainless steel Aisi 304 - 18/10; Stainless legs with a height of 320 mm; Mixer 0.37kw/380V, Extras: cooling/heating jacket, insulation, adjustable mixer rotations, control center, which includes lid-mounted sensors, closing when opening the mixer lid. Larger mixing tanks 700l, 1000l, 1500l and mixing motors of different capacities are available..The size of the tank can vary up to max. +/-10%

A container on stainless legs for fermentation and/or short-term storage of wine. The set includes: legs; conical base; bottom valve 1"; sampling valve 1/2"; upper valve 1/2", upper spring cover, floating cover. Dimensions: diameter 794mm and height 1320mm..The size of the tank can vary up to max. +/-10%

Stainless steel conical bottom container with floating lid. Size: 600L; Diameter: 794mm; Height: 1570mm; Chrome-plated valve 1"; Stainless steel Aisi 304 - 18/10 Stainless legs with a height of 320mm.The size of the tank can vary up to max. +/-10%

Stainless steel container with a closed top, a cleaning hatch and a conical bottom. Size: 600L; Diameter: 794mm; Height: 1720mm. Standard equipment: welded legs, sampling valve 1/2", side ball valve 1", bottom ball valve 1", oval cleaning hatch, lid Ø385 mm, analog thermometer, level indicator Ø16 mm, 2 × inert gas connection ½".The size of the tank can vary up to max. +/-10%

Stainless pressure tank for 3bar pressure with cooling device. Conical base, insulated container (also upper and lower part), washing head, overpressure valve adjustable up to 3bar, thermometer, outlet opening from the bottom, top hatch 300mm, digital control of the cold device. Dimensions: height 2250mm and diameter 920mm.The size of the tank can vary up to max. +/-10%

Stainless steel legless container for fermentation and/or short-term storage of wine. Top feather cover included. Tank without bottom valve. Dimensions: diameter 794mm and height 1000mm..The size of the tank can vary up to max. +/-10%

Stainless steel legless container for fermentation and/or short-term storage of wine. Top feather cover included. Tank without bottom valve. Dimensions: diameter 794mm and height 1250mm..The size of the tank can vary up to max. +/-10%

Transport container with a stainless conical bottom for transport with a rocker or forklift. Size: 600L; Diameter: 794mm; Height: 1720mm; Chrome-plated valve 1" ; Stainless steel Aisi 304 - 18/10 Stainless legs with a height of 320mm. Standard equipment: cone base (profile 150 × 100 × 3 mm), lid Ø385mm, outlet - ball valve 5/4", level indicator Ø16 mm, 2 × inert gas fitting ½".The size of the tank can vary up to max. +/-10%

Stainless sealed container for storage or fermentation. Dimensions: D794mm, H 1720mm. Standard equipment: welded legs, bottom outlet - ball valve 1", side outlet - ball valve 1", sampling valve DN15, top cover Ø385mm, analog thermometer, level indicator Ø16 mm, 2 × inert gas fitting ½" Extras: valves - DN, WG, garola, TC , Macon ; lower side tap ¾”; fitting DN50 + cap/vent valve, lifting ears, rectangular cleaning door 245 × 310 mm, adjustable feet.The size of the tank can vary up to max. +/-10%

Stainless steel isobaric tank for beer fermentation and storage, pressure holding 3 Bar, ideal for maturation and dry-hopping. Thanks to the pressure seal, it is ideal for all companies and breweries requiring isobaric fermentation. The natural carbonation of the beer is caused by the carbon dioxide produced by the yeasts during a leavening process taking place in an airtight container without the addition of sugars. Provided with: upper manhole cover Ø 400, frame height 80 mm, hooks closure, side and flag opening. Complete with no. 2 stainless steel lifting and handling handles. AISI 304 stainless steel Din 50 vacuum breaker vent valve. Predisposition for safety valve with 1/2" female threaded connection in AISI 304 stainless steel. AISI 304 stainless steel 500 mm ladder support. Internal spray ball Ø 65 AISI 316 completely removable. Removable Din 32 AISI 304 washing hose. AISI 304 cross-shaped connection, 0-5 bar pressure gauge housing, CO2 inlet butterfly Din 32 valve male-swivel / 32 Din female, predisposition for bubbler connection Din 32 female. Inwards going level indicator with stainless steel protection complete with upper and lower level holder Din 15 x tube Ø 12, connected to the washing tube for easy sanitization. AISI 304 stainless steel cylinder cooling jacket h 750 mm, in/out sleeves for cooling liquid Ø 1" gas, max. operating pressure 1.5 bar. Cooling jacket on the molded cone h 300 mm in AISI 304 stainless steel, in/out sleeves for refrigerant liquid Ø 1" gas, max. operating pressure 1.5 bar. Cylinder and bottom insulation with 60 mm of Armaflex-type adhesive insulation. Bimetallic thermometer in AISI 304 stainless steel, scale -10/+50°C, stem length 200 mm. Additional stainless steel probe holder. Probe holder in AISI 304 stainless steel, length 300 mm. Take Din 15 sample in AISI 304 stainless steel. Total discharge with butterfly valve Din 32 male-swivel / 32 Din female in AISI 304 stainless steel. Partial discharge with butterfly valve Din 32 male-swivel / 32 Din female in AISI 304 stainless steel. Butterfly valve Din 32 male-swivel / 32 Din female in AISI 304 stainless steel for dry-hopping. Nr. 4 legs with adjustable M 20 feet in AISI 304 stainless steel. 3 bar safety valve with 1/2" threaded connection in AISI 304 stainless steel. Technical features: made of AISI 304 25/10 mm thick stainless steel. BA glossy internal finish with satin welds, flower-patterned external finishing with satin welds. Conical bottom 60° - 10° conical lid. Capacity: 650 L +/- 3%. Internal diameter: 800 mm. External diameter: 930 mm. Cylinder height: 1000 mm. Leg height: 1210 mm. Total height: 2570 mm.

Stainless steel isobaric tank for beer fermentation and storage, pressure holding 3 Bar, ideal for maturation and dry-hopping. Thanks to the pressure seal, it is ideal for all companies and breweries requiring isobaric fermentation. The natural carbonation of the beer is caused by the carbon dioxide produced by the yeasts during the fermentation process in an airtight container without the addition of sugars. Provided with: upper manhole cover Ø 400, frame height 80 mm, hooks closure, side, and flag opening. Equipped with two stainless steel lifting and handling handles. AISI 304 stainless steel Din 50 vacuum breaker vent valve. Predisposition for a safety valve with 1/2" female threaded connection in AISI 304 stainless steel. AISI 304 stainless steel 500 mm ladder support. Removable internal spray ball Ø 65 AISI 316. Removable Din 32 AISI 304 washing hose. AISI 304 cross-shaped connection, 0–5 bar pressure gauge housing, CO2 inlet butterfly valve Din 32 male-swivel / 32 Din female, predisposition for bubbler connection Din 32 female. Inwards level indicator with stainless steel protection, complete with upper and lower level holders Din 15 x tube Ø 12, connected to the washing tube for easy cleaning. AISI 304 stainless steel cylinder cooling jacket, height 750 mm, with in/out sleeves for cooling liquid Ø 1" gas, max. operating pressure 1.5 bar. Cooling jacket on the molded cone, height 300 mm, in AISI 304 stainless steel, with in/out sleeves for refrigerant liquid Ø 1" gas, max. operating pressure 1.5 bar. Cylinder and bottom insulation with 60 mm Armaflex-type adhesive insulation. Bimetallic thermometer in AISI 304 stainless steel, scale -10/+50°C, stem length 200 mm. Additional stainless steel probe holder, length 300 mm. Sample tap Din 15 in AISI 304 stainless steel. Total discharge with butterfly valve Din 32 male-swivel / 32 Din female in AISI 304 stainless steel. Partial discharge with butterfly valve Din 32 male-swivel / 32 Din female in AISI 304 stainless steel. Butterfly valve Din 32 male-swivel / 32 Din female in AISI 304 stainless steel for dry-hopping. Four adjustable legs with M 20 feet in AISI 304 stainless steel. 3-bar safety valve with 1/2" threaded connection in AISI 304 stainless steel. Technical features: made of AISI 304 stainless steel, 25/10 mm thick. BA glossy internal finish with satin welds, flower-patterned external finish with satin welds. Conical bottom 60° and conical lid 10°. Capacity: 950 L +/- 3%. Internal diameter: 930 mm. External diameter: 1150 mm. Cylinder height: 1000 mm. Leg height: 1420 mm. Total height: 2850 mm.

Stainless steel isobaric tank for beer fermentation and storage, pressure holding 3 Bar, ideal for maturation and dry-hopping. Thanks to the pressure seal, it is suitable for all companies and breweries requiring isobaric fermentation. The natural carbonation of the beer is caused by carbon dioxide produced by yeasts during fermentation in an airtight container without the addition of sugars. Provided with: upper manhole cover Ø 400, frame height 80 mm, hooks closure, side, and flag opening. Two stainless steel lifting and handling handles. AISI 304 stainless steel Din 50 vacuum breaker vent valve. Predisposition for safety valve with 1/2" female threaded connection in AISI 304 stainless steel. AISI 304 stainless steel 500 mm ladder support. Removable internal spray ball Ø 65 AISI 316. Removable Din 32 AISI 304 washing hose. AISI 304 cross-shaped connection, 0–5 bar pressure gauge housing, CO2 inlet butterfly valve Din 32 male-swivel / 32 Din female, predisposition for bubbler connection Din 32 female. Inwards level indicator with stainless steel protection, complete with upper and lower level holders Din 15 x tube Ø 12, connected to the washing tube for easy cleaning. AISI 304 stainless steel cylinder cooling jacket, height 750 mm, with in/out sleeves for cooling liquid Ø 1" gas, max. operating pressure 1.5 bar. Cooling jacket on the molded cone, height 300 mm, in AISI 304 stainless steel, with in/out sleeves for refrigerant liquid Ø 1" gas, max. operating pressure 1.5 bar. Cylinder and bottom insulation with 60 mm Armaflex-type adhesive insulation. Bimetallic thermometer in AISI 304 stainless steel, scale -10/+50°C, stem length 200 mm. Additional stainless steel probe holder, length 300 mm. Sample tap Din 15 in AISI 304 stainless steel. Total discharge with butterfly valve Din 32 male-swivel / 32 Din female in AISI 304 stainless steel. Partial discharge with butterfly valve Din 32 male-swivel / 32 Din female in AISI 304 stainless steel. Butterfly valve Din 32 male-swivel / 32 Din female in AISI 304 stainless steel for dry-hopping. Four adjustable legs with M 20 feet in AISI 304 stainless steel. 3-bar safety valve with 1/2" threaded connection in AISI 304 stainless steel. Technical features: made of AISI 304 stainless steel, 25/10 mm thick. BA glossy internal finish with satin welds, flower-patterned external finish with satin welds. Conical bottom 60° and conical lid 10°. Capacity: 1100 L +/- 3%. Internal diameter: 930 mm. External diameter: 1150 mm. Cylinder height: 1250 mm. Leg height: 1420 mm. Total height: 3100 mm.

Stainless steel conical bottom container with floating lid. Size: 1100L; Diameter: 953mm; Height: 1920mm; Chromed valves 1" (bottom), sampling valve 1/2" ; Stainless steel Aisi 304 - 18/10; Stainless steel legs with a height of 320 mm.The size of the tank can vary up to max. +/-10%

A container on stainless legs for fermentation and/or short-term storage of wine. The set includes: legs; flat bottom; drain valve on the side 1/2", upper spring cover, floating cover. Dimensions: diameter 565mm and height 1320mm..The size of the tank can vary up to max. +/-10%

Stainless open cone bottom (10 degree) container with mixer. The size of the tank is 700L; Diameter: 955mm; Height: 1020mm, total height 1700mm; valve DN50; Stainless steel Aisi 304 - 18/10; Stainless legs with a height of 320 mm; Mixer 0.37kw/380V, Extras: cooling/heating jacket, insulation, adjustable mixer rotations, control center, which includes lid-mounted sensors, closing when opening the mixer lid. Larger mixing tanks 700l, 1000l, 1500l and mixing motors of different capacities are available..The size of the tank can vary up to max. +/-10%

With the mixing container, you can adjust the taste of your juice, wine, etc. drink. Complete with a stainless steel mixer with mixing paddles, the speed of which is set to ensure a perfect mixing process, minimizing exposure to oxygen. The stainless steel tank is also complete with 2 valves D25mm at the bottom and D20mm at the top and an added washing head. Dimensions: ø102.5 cm + 20 cm valve; height 179cm, 220V motor 0.18 kW with Schuko plug; Stainless steel mixing spoon as a measuring stick, control hatch with a button inside the lid of the container. Mixer 14rpm or 28rpm (specify when ordering). Device conforming to CE safety standards..

The uKeg ™ 128 pressurized container has an antique copper finish. UKeg ™ 128 is a mini-keg in the size of 3.8 l. Chilled uKeg ™ keeps beer, lemonade, cocktails fresh, cool and carbonated for up to two weeks in the refrigerator. Durable, double-wall vacuum-insulated stainless steel keeps beer cold for eight hours. Use it on the go or at home. CO2 regulator cap with adjustable valve gauge. The set includes two 16-gram CO2 cartridges. Volume: 3785 ml, Dimensions: 172 x 235 x 303 mm. Features: Keep beer, cocktails, lemonade or cider fresh for weeks, VPR Cap: Automatically adjusts pressure for optimal carbonation of beer. Select your desired carbonation level from zero (off) to 15 psi. ; container: durable, double-wall vacuum-insulated stainless steel; manometer: easily read the pressurizer pressure; dispenser tap: easily pour beer at any time without removing the cap. Including a tap lock to prevent dispensing; interchangeable tap handle: the handle can be changed to personalize or represent your favorite brewery sight glass: shows uKeg ™ contents and how much is left; CO2 mini-balloons cartridge: Uses inexpensive, food-grade CO2 cylinders..