INOX wine tank 500 l-3 valves

Hand pump to fill the tank floating lid seal..The size of the tank can vary up to max. +/-10%

Vaseline stainless steel container for sealing floating lids or lubricating seals. Vaseline oil is poured over juice or wine - the oil forms a layer on top of the drink that prevents air from coming into contact with the juice and protects the drink from fermentation. By using a floating lid with an oil seal, the apple juice also stays fresh for several months. The oil always remains on the surface of the juice, because it is lighter than the juice and thus does not mix with the juice. Vaseline oil is tasteless, odorless, colorless and has an unlimited shelf life. The oil is tasteless, odorless, transparent and has an unlimited shelf life..

Water-air lock for a large tank for fermenting the product..

Air lock for the tank for fermenting the product..

Stainless open cone bottom (10 degree) container with mixer. Size: 500L; Diameter: 800mm; Height: 1020mm, total height 1700mm; valve DN50; Stainless steel Aisi 304 - 18/10; Stainless steel legs with a height of 320 mm; Mixer 0.37kw/380V, 34rpm. ; Extras: adjustable mixer rotations, cooling/warming jacket, Control center, which includes sensors mounted on the lid, closing the mixer when the lid is opened. Larger mixing tanks 700l, 1000l, 1500l and mixing motors of different capacities are available..The size of the tank can vary up to max. +/-10%

Tank accessories for fermentation or airtight storage. The set includes a floating cover, a hand pump, a seal, a water lock and an outer dust cover seal..The size of the tank can vary up to max. +/-10%

Wine storage container on stainless legs. The set includes: legs; conical base; thermometer; liquid level gauge; gas openings 1/2 on the tank; bottom valve 1"; sampling valve 1/2"; top feather cover. Dimensions: diameter 794mm and height 1470mm..The size of the tank can vary up to max. +/-10%

600L plastic closed cone container conforming to food standards. Well suited for fermentation and storage of products. The set includes: tank 600L; painted metal base frame (RAL3009); 1. Cover with ventilation; 2. side outlet 1" thread; 3. lower valve 2" thread. Additional options: open from the top (without a hatch), open from the top and a wide low container, with a frame from the top... the possibility to attach a mixer and insert from the top through the hatch,.

A container on stainless legs for fermentation and/or short-term storage of wine. The set includes: legs; conical base; bottom valve 1"; sampling valve 1/2"; upper valve 1/2", upper spring cover, floating cover. Dimensions: diameter 794mm and height 1320mm..The size of the tank can vary up to max. +/-10%

Stainless steel conical bottom container with floating lid. Size: 600L; Diameter: 794mm; Height: 1570mm; Chrome-plated valve 1"; Stainless steel Aisi 304 - 18/10 Stainless legs with a height of 320mm.The size of the tank can vary up to max. +/-10%

With the mixing container, you can adjust the taste of your juice, wine, etc. drink. Complete with a stainless steel mixer with mixing paddles, the speed of which is set to ensure a perfect mixing process, minimizing exposure to oxygen. The stainless steel tank is additionally complete with 2 valves D25mm and D20mm and an added washing head. Dimensions: ø78 cm + 20 cm valve; height 169cm, 220V motor 0.18 kW; Stainless steel mixing spoon as measuring stick, Check hatch with button. Mixer 14rpm or 28rpm (specify when ordering)..

Tank on stainless legs for wine fermentation and/or short-term storage with cooling jacket. The set includes: cooling jacket 0.91m2/400mm, legs; conical base; bottom valve 1"; sampling valve 1/2"; upper valve 5/4", upper feather cover, floating dust cover, dust cover, thermometer and level indicator. Dimensions: diameter 794mm and height 1570mm..The size of the tank can vary up to max. +/-10%

500l container on wheels with ready mixer connection on the side. The mixer is not included in the price. The container has a diameter of 796 mm and a height of 1700 mm. Additional options: moving with a forklift, mixer.The size of the tank can vary up to max. +/-10%

Stainless steel legless container for fermentation and/or short-term storage of wine. Top feather cover included. Tank without bottom valve. Dimensions: diameter 794mm and height 1000mm..The size of the tank can vary up to max. +/-10%

Stainless steel legless container for fermentation and/or short-term storage of wine. Top feather cover included. Tank without bottom valve. Dimensions: diameter 794mm and height 1250mm..The size of the tank can vary up to max. +/-10%

Stainless sealed container for storage or fermentation. Dimensions: D794mm, H 1720mm. Standard equipment: welded legs, bottom outlet - ball valve 1", side outlet - ball valve 1", sampling valve DN15, top cover Ø385mm, analog thermometer, level indicator Ø16 mm, 2 × inert gas fitting ½" Extras: valves - DN, WG, garola, TC , Macon ; lower side tap ¾”; fitting DN50 + cap/vent valve, lifting ears, rectangular cleaning door 245 × 310 mm, adjustable feet.The size of the tank can vary up to max. +/-10%

Stainless steel isobaric tank for beer fermentation and storage, pressure holding 3 Bar, ideal for maturation and dry-hopping. Thanks to the pressure seal, it is ideal for all companies and breweries requiring isobaric fermentation. The natural carbonation of the beer is caused by the carbon dioxide produced by the yeasts during a leavening process taking place in an airtight container without the addition of sugars. Provided with: upper manhole cover Ø 400, frame height 80 mm, hooks closure, side and flag opening. Complete with no. 2 stainless steel lifting and handling handles. AISI 304 stainless steel Din 50 vacuum breaker vent valve. Predisposition for safety valve with 1/2" female threaded connection in AISI 304 stainless steel. AISI 304 stainless steel 500 mm ladder support. Internal spray ball Ø 65 AISI 316 completely removable. Removable Din 32 AISI 304 washing hose. AISI 304 cross-shaped connection, 0-5 bar pressure gauge housing, CO2 inlet butterfly Din 32 valve male-swivel / 32 Din female, predisposition for bubbler connection Din 32 female. Inwards going level indicator with stainless steel protection complete with upper and lower level holder Din 15 x tube Ø 12, connected to the washing tube for easy sanitization. AISI 304 stainless steel cylinder cooling jacket h 750 mm, in/out sleeves for cooling liquid Ø 1" gas, max. operating pressure 1.5 bar. Cooling jacket on the molded cone h 300 mm in AISI 304 stainless steel, in/out sleeves for refrigerant liquid Ø 1" gas, max. operating pressure 1.5 bar. Cylinder and bottom insulation with 60 mm of Armaflex-type adhesive insulation. Bimetallic thermometer in AISI 304 stainless steel, scale -10/+50°C, stem length 200 mm. Additional stainless steel probe holder. Probe holder in AISI 304 stainless steel, length 300 mm. Take Din 15 sample in AISI 304 stainless steel. Total discharge with butterfly valve Din 32 male-swivel / 32 Din female in AISI 304 stainless steel. Partial discharge with butterfly valve Din 32 male-swivel / 32 Din female in AISI 304 stainless steel. Butterfly valve Din 32 male-swivel / 32 Din female in AISI 304 stainless steel for dry-hopping. Nr. 4 legs with adjustable M 20 feet in AISI 304 stainless steel. 3 bar safety valve with 1/2" threaded connection in AISI 304 stainless steel. Technical features: made of AISI 304 25/10 mm thick stainless steel. BA glossy internal finish with satin welds, flower-patterned external finishing with satin welds. Conical bottom 60° - 10° conical lid. Capacity: 650 L +/- 3%. Internal diameter: 800 mm. External diameter: 930 mm. Cylinder height: 1000 mm. Leg height: 1210 mm. Total height: 2570 mm.

Stainless steel isobaric tank for beer fermentation and storage, pressure holding 3 Bar, ideal for maturation and dry-hopping. Thanks to the pressure seal, it is ideal for all companies and breweries requiring isobaric fermentation. The natural carbonation of the beer is caused by the carbon dioxide produced by the yeasts during the fermentation process in an airtight container without the addition of sugars. Provided with: upper manhole cover Ø 400, frame height 80 mm, hooks closure, side, and flag opening. Equipped with two stainless steel lifting and handling handles. AISI 304 stainless steel Din 50 vacuum breaker vent valve. Predisposition for a safety valve with 1/2" female threaded connection in AISI 304 stainless steel. AISI 304 stainless steel 500 mm ladder support. Removable internal spray ball Ø 65 AISI 316. Removable Din 32 AISI 304 washing hose. AISI 304 cross-shaped connection, 0–5 bar pressure gauge housing, CO2 inlet butterfly valve Din 32 male-swivel / 32 Din female, predisposition for bubbler connection Din 32 female. Inwards level indicator with stainless steel protection, complete with upper and lower level holders Din 15 x tube Ø 12, connected to the washing tube for easy cleaning. AISI 304 stainless steel cylinder cooling jacket, height 750 mm, with in/out sleeves for cooling liquid Ø 1" gas, max. operating pressure 1.5 bar. Cooling jacket on the molded cone, height 300 mm, in AISI 304 stainless steel, with in/out sleeves for refrigerant liquid Ø 1" gas, max. operating pressure 1.5 bar. Cylinder and bottom insulation with 60 mm Armaflex-type adhesive insulation. Bimetallic thermometer in AISI 304 stainless steel, scale -10/+50°C, stem length 200 mm. Additional stainless steel probe holder, length 300 mm. Sample tap Din 15 in AISI 304 stainless steel. Total discharge with butterfly valve Din 32 male-swivel / 32 Din female in AISI 304 stainless steel. Partial discharge with butterfly valve Din 32 male-swivel / 32 Din female in AISI 304 stainless steel. Butterfly valve Din 32 male-swivel / 32 Din female in AISI 304 stainless steel for dry-hopping. Four adjustable legs with M 20 feet in AISI 304 stainless steel. 3-bar safety valve with 1/2" threaded connection in AISI 304 stainless steel. Technical features: made of AISI 304 stainless steel, 25/10 mm thick. BA glossy internal finish with satin welds, flower-patterned external finish with satin welds. Conical bottom 60° and conical lid 10°. Capacity: 950 L +/- 3%. Internal diameter: 930 mm. External diameter: 1150 mm. Cylinder height: 1000 mm. Leg height: 1420 mm. Total height: 2850 mm.

Stainless steel isobaric tank for beer fermentation and storage, pressure holding 3 Bar, ideal for maturation and dry-hopping. Thanks to the pressure seal, it is suitable for all companies and breweries requiring isobaric fermentation. The natural carbonation of the beer is caused by carbon dioxide produced by yeasts during fermentation in an airtight container without the addition of sugars. Provided with: upper manhole cover Ø 400, frame height 80 mm, hooks closure, side, and flag opening. Two stainless steel lifting and handling handles. AISI 304 stainless steel Din 50 vacuum breaker vent valve. Predisposition for safety valve with 1/2" female threaded connection in AISI 304 stainless steel. AISI 304 stainless steel 500 mm ladder support. Removable internal spray ball Ø 65 AISI 316. Removable Din 32 AISI 304 washing hose. AISI 304 cross-shaped connection, 0–5 bar pressure gauge housing, CO2 inlet butterfly valve Din 32 male-swivel / 32 Din female, predisposition for bubbler connection Din 32 female. Inwards level indicator with stainless steel protection, complete with upper and lower level holders Din 15 x tube Ø 12, connected to the washing tube for easy cleaning. AISI 304 stainless steel cylinder cooling jacket, height 750 mm, with in/out sleeves for cooling liquid Ø 1" gas, max. operating pressure 1.5 bar. Cooling jacket on the molded cone, height 300 mm, in AISI 304 stainless steel, with in/out sleeves for refrigerant liquid Ø 1" gas, max. operating pressure 1.5 bar. Cylinder and bottom insulation with 60 mm Armaflex-type adhesive insulation. Bimetallic thermometer in AISI 304 stainless steel, scale -10/+50°C, stem length 200 mm. Additional stainless steel probe holder, length 300 mm. Sample tap Din 15 in AISI 304 stainless steel. Total discharge with butterfly valve Din 32 male-swivel / 32 Din female in AISI 304 stainless steel. Partial discharge with butterfly valve Din 32 male-swivel / 32 Din female in AISI 304 stainless steel. Butterfly valve Din 32 male-swivel / 32 Din female in AISI 304 stainless steel for dry-hopping. Four adjustable legs with M 20 feet in AISI 304 stainless steel. 3-bar safety valve with 1/2" threaded connection in AISI 304 stainless steel. Technical features: made of AISI 304 stainless steel, 25/10 mm thick. BA glossy internal finish with satin welds, flower-patterned external finish with satin welds. Conical bottom 60° and conical lid 10°. Capacity: 1100 L +/- 3%. Internal diameter: 930 mm. External diameter: 1150 mm. Cylinder height: 1250 mm. Leg height: 1420 mm. Total height: 3100 mm.

Made from AISI 304 18/10 stainless steel, the 500-litre tank with a conical bottom is perfect for wine fermentation and liquid food storage, offering a professional and high-quality solution for demanding businesses. Supported by 3 stainless steel feet for maximum stability, the tank features a reinforced 10° conical bottom and total and partial drains for easy liquid removal. A stainless steel wine taster allows for the extraction of small quantities of must. The air float, equipped with a transparent food-grade plastic air chamber, ensures the insulation of the wine and preserves its organoleptic properties. The tank’s outer surface is flamed with satin welds, while the inner surface is mirror polished for easy cleaning and sanitisation. Characteristics: Material: stainless steel AISI 304. Capacity: 500 L. Internal finishes: mirror polished. External finishes: flamed, with satin welds. Conical bottom 10° with reinforcements. Total discharge with 1" x ENO 30 valve (3). Partial discharge with stainless steel valve and 1" x ENO 30 plastic elbow (1). 3 stainless steel feet. Stainless steel air float with transparent food-grade plastic air chamber (4). Double-acting plastic vent valve. Stainless steel wine taster (2). Conforms to CE safety standards. Dimensions: Diameter: 720 mm (D1). Total height: 1250 mm (H1). Foot height: 400 mm (H2). Virola height: 1650 mm (H3). Thickness: Walls: 1 mm. Bottom: 1.2 mm.

The 500-litre stainless steel tank is a professional-grade product designed for wine storage, made from AISI 304 stainless steel to ensure robustness and preserve the product's organoleptic properties. It features a 10° conical bottom with reinforcements for ideal decantation and a stainless steel wine taster for sampling small quantities to monitor maturation. The tank includes a partial drain with a stainless steel valve and 1" x ENO 30 plastic elbow, a full drain with a 1" x ENO 30 valve, and a 400 mm anti-retention top manhole cover. A 300 mm bottom door allows easy emptying of the marc. Ideal for small and medium-sized businesses, this tank meets all practical needs for wine storage. Characteristics: Material: AISI 304 stainless steel, Capacity: 500 L, Internal finish: mirror polished, External finish: flamed with satin welds, Conical bottom: 10° with reinforcements, Total discharge: 1" x ENO 30 valve (3), Partial discharge: stainless steel valve and 1" x ENO 30 plastic elbow (1), 300 mm round manhole, flush with the bottom for easy emptying, Upper 400 mm non-returnable manhole cover, 10° conical roof, 3 stainless steel feet, Double-acting plastic vent valve, Stainless steel wine taster (2), Conforms to CE safety standards, Dimensions: Diameter: 720 mm (D1), Roof height: 300 mm (H4), Virola height: 1250 mm (H3), Foot height: 400 mm (H2), Total height with feet, sash, and roof: 1950 mm (H1), Thickness: Walls: 1 mm, Bottom: 1.5 mm.

Stainless open cone bottom (10 degree) container with mixer. Size: 500L; Diameter: 800mm; Height: 1020mm, total height 1700mm; valve DN50; Stainless steel Aisi 304 - 18/10; Stainless steel legs with a height of 320 mm; Mixer 0.37kw/380V, 34rpm. ; Extras: adjustable mixer rotations, cooling/warming jacket, Control center, which includes sensors mounted on the lid, closing the mixer when the lid is opened. Larger mixing tanks 700l, 1000l, 1500l and mixing motors of different capacities are available..The size of the tank can vary up to max. +/-10%

.

Made in Slovenia honey container on legs. Supports up to 690kg. Dimensions: diameter 794mm, total height 1320mm, h1 1000mm and h2 320mm..The size of the tank can vary up to max. +/-10%

Boiler / mixing tank stainless base with dimensions 630x630x260h.

Stainless pressure tank for 3bar pressure with a jacket. Conical base 60° with 50mm insulation. Size: 1100L. In the set: washing head, overpressure valve adjustable up to 3bar, thermometer. Accessories: level sensor, adjustable feet, sampling valve. valves DN40 or DN50..The size of the tank can vary up to max. +/-10%