Hose Pharmapress 25,4x34,5mm +100°C/96% alk

Translucent hose made from TPE-S hygienic rubber reinforced withan AISI 302 stainless steel spiral. Inside and outside completely smooth to enhance flow properties and allow easy cleaning and sterilization processes. Highly neutral in taste and odor, it preserves the organoleptic properties of the medium. Curing-free material: Pharmasteel does not need any vulcanization process, therefore it prevents the risk of leaching of curing agent residues into the end product (peroxide or platinum volatile rests). It allows to save energy sources and limit Co2 emissions. Good chemical resistance to acids and alkaline solutions and good impermeability. Versatile rubber resistantalso to oils and fats under common use conditions, as well as to ozone, ageing, weathering, as well as to hydrolysis and proliferation of bacteria. Food grade, according to EU 10/2011 (classes A, B, C, D1, D2)and FDA CFR 21-177.2600. Compliant with the pharmaceutical standards USP CLASS VI. Resistant to hydrolysisand proliferation of bacteria.• Versatile suction and delivery hose designed totransfer food, cosmetic, health care and pharmaceutical products. Suitable for a manifold range of media such as wines, fruit juices, vinegar, spirits with alcohol content up to 96%, creams,soaps, milk and by-products; also resistant to products containing oils and fats.

Red hygienic TPE-S hose, with an identificative white longitudinal stripe and white liner, reinforced with steel spiral and polyesterthread. Inside and outside completely smooth to enhance flow properties and allow easy cleaning and sterilization processes. Produced with specific tighter tolerances than an equivalent vulcanized rubber hose. Cover features: excellent resistance to ozone, ageing, UV rays and weathering. The extruded, low porosity TPE-S tube reduces permeation problems. Highly neutral in taste and odor, it preserves the organoleptic properties of the medium. Good chemical resistance to acids and alkaline solutions andgood impermeability. Versatile rubber resistant even to an alcohol concentration of 50%. Curing-free material:the production of Plutone PF does not need any vulcanization process, therefore it prevents the risk of leaching of curing agent residues into the end product (peroxide or platinum volatile rests). It can be conductive (R<102 Ohm/m) by grounding the spiral. Foodgrade, according to EU 10/2011 (Classes A, B, C, D1) and FDA CFR-21- 177.2600.• Versatile suction and delivery hose designed to convey food liquids. Suitable for a manifold range of media such as wines, fruit juices, vinegar, spirits with an alcohol content up to 50%. Available in blue version (color cod. B6) to deliver milk and dairy products.

NBR rubber hose with a heat-resistant reinforced structure for the food industry. Suitable for wort, fatty liquids, oils and milk. The tubes meet the FDA food standard class. Inner layer: white NBR rubber. Reinforced with high resistance textile fiber. Temperature resistance: -20 to 110 ° C. Suitable for steam cleaning up to 30 minutes. Working pressure: 10 bar. Burst pressure: 30 bar. Ø25(inner) x 37mm (outer)..

Applications: Suction and pressure hose for liquid foods, especially oils and fats, but also suitable for wine, beer, cider, juice, milk and alcohol up to 96% concentration. Features: - smooth white inner rubber that does not promote the formation of bacterial colonies, - meets international standards, - flexible and easy to handle, - rubber with a stain-free surface, - very resistant to detergents up to +130 °C. Structure: - Inner rubber: food grade, oil-resistant NBR, white, smooth; - Surface rubber: and weatherproof NBR / PVC, blue, fabric print; - Reinforcements: synthetic textile and steel spiral; - Operating temperature: -30 ° C… + 100 ° C. Standards: - EU No. 1935 / 2004 and 2023/2006, complies with FDA and BgVV directives, - IANESCO.

Transparent hygienic TPE pharmaceutical grade tubing specially designed for peristaltic pumps for use in the food, pharmaceutical, biotechnology and cosmetic industries. Tube Features: Extruded low porosity TPE tube reduces penetration problems. Very neutral taste and smell, it retains the organoleptic properties of the medium. Good chemical resistance to acids and alkaline solutions. Versatile rubber also resistant to alcohols max. 50% content. Much more impermeable than silicone elastomers. Superior life of peristaltic pumps compared to similar tubes from the competition (average life > 190 hours when tested with a 3-lobe pump at 600 rpm) and minimal spatter on pump heads. Standards: ISO 10993-5 (non-cytotoxic)/ISO10993-4 (non-hemolytic, direct and indirect methods)/USP <88> CLASS VI/USP <661> Physico-chemical tests - plastics/EU Regulation No. 10/2011 (classes A, B, C, D1)/FDA reg. CFR 21-177.2600. Hardener-free material: IPL Crystal Clear-55 does not require a vulcanization process, so it prevents the risk of hardener leaching residues into the final product (peroxide or platinum volatile residues) and allows saving energy from sources and limiting CO2 emissions.• An ideal solution for peristaltic pumps operating in the pharmaceutical, cosmetic and food sectors. Typical applications: dosing of pharmaceutical liquids, sterile filling and dispensing systems, cell culture media, synthetic processes, purification and separation processes, laboratory applications, dosing of soaps, creams, detergents. Dosing juices, alcohols, sauces, viscous liquids (syrups), waters and purified waters. Because milk and low-fat products. For drink machines. Heat-set and quick-weld in multiple lengths that can be assembled without the use of connectors. This ensures the stability of the flow.

Transparent hose made of TPE-S hygienic rubber, reinforced with high resistance polyester thread. Completely smooth inside and out to improve flow properties and allow easy cleaning and sterilization. Very neutral taste and smell, it retains the organoleptic properties of the medium. Hardening-free material: Pharmapress does not require a vulcanization process, which is why it prevents the risk of hardener residues leaching into the final product (peroxide or platinum volatile residues) and allows saving energy sources and limiting CO2 emissions. Good chemical resistance to acids and alkaline solutions. Excellent resistance to hydrolysis and bacterial growth. Versatile rubber resistant to oils and greases under normal conditions of use, as well as ozone, aging and weathering. To ensure permanent wall-built marking traceability even after repeated use. Food grade according to EU 10/2011 (classes A, B, C, D1, D2) and FDA CFR-21-177.2600. Meets USP CLASS VI standard for pharmaceutical products.• Delivery hose intended for transporting food, cosmetics, healthcare and pharmaceutical products. Suitable for many carriers such as wines, fruit juices, vinegar, spirits up to 96% alcohol, creams, soaps, milk and by-products; also resistant to products containing oils and fats.

Translucent hose made from TPE-S hygienic rubber reinforced withan AISI 302 stainless steel spiral. Inside and outside completely smooth to enhance flow properties and allow easy cleaning and sterilization processes. Highly neutral in taste and odor, it preserves the organoleptic properties of the medium. Curing-free material: Pharmasteel does not need any vulcanization process, therefore it prevents the risk of leaching of curing agent residues into the end product (peroxide or platinum volatile rests). It allows to save energy sources and limit Co2 emissions. Good chemical resistance to acids and alkaline solutions and good impermeability. Versatile rubber resistantalso to oils and fats under common use conditions, as well as to ozone, ageing, weathering, as well as to hydrolysis and proliferation of bacteria. Food grade, according to EU 10/2011 (classes A, B, C, D1, D2)and FDA CFR 21-177.2600. Compliant with the pharmaceutical standards USP CLASS VI. Resistant to hydrolysisand proliferation of bacteria.• Versatile suction and delivery hose designed totransfer food, cosmetic, health care and pharmaceutical products. Suitable for a manifold range of media such as wines, fruit juices, vinegar, spirits with alcohol content up to 96%, creams,soaps, milk and by-products; also resistant to products containing oils and fats.