hobby bottle filler autom. 3 heads

Stainless bottling device for 4 bottles. Made in Italy. Bottling nozzles 15mm; adjustment of the amount of liquid on the bottle tips; stainless drain valve; productivity 700l/h; Size: 580x1070x500 mm; Weight 38 kg. Additional equipment: mechanical or electronic volume sensor, pump, electronic input valve, foam reduction valve (e.g. when bottling beer), bottling nozzles 17mm..

A simple and primitive bottle opener for 4 bottles. Stainless nozzles and inlet pipe with float with sanitary plastic tub. Suitable for bottles 0.375 - 2l. Suitable for bottling wine, juice and also beer. The bottling level can be adjusted using the bottling end seals..

Simple bottle opener for 5 bottles. Stainless nozzles and inlet tube with float. Suitable for bottles 0.375 - 2l. Suitable for bottling wine, juice and also beer..

Back pressure isobaric small bottler for hobby use. Productivity 80-90pdl/h. Made in Sweden! Dimensions of suitable bottles: height 175-310cm and bottle mouth 26mm. Extras (indicate immediately when ordering): Swing-top bottle bottling nozzle +25EUR Using the device: 1. Connect the bottler to the CO2 and bottle of the liquid to be bottled 2. Place the bottle under the device 3. Fill the bottle with CO2 by pressing the black "+" button 4. Press to the pressure release "-" button 5. Fill the bottle with CO2 by pressing the black "+" button 6. Points no. 3 and 4 should be repeated for min. 2x to ensure sufficient CO2 concentration in the bottle, but lastly, always press the "+" button before bottling 7. Open the liquid supply valve and close the container when it is full..

Italian quality product from a company with over 20 years of experience. EnolMaster is a self-priming bottling device for small producers. Suitable bottle opening 16-28mm and height 180-330mm. Productivity: up to 600 bottles/hour..

A simple and primitive bottle opener for 4 bottles. Stainless nozzles and inlet pipe with float with sanitary plastic tub. Suitable for bottles 0.375 - 2l. Suitable for bottling wine, juice and also beer. The bottling level can be adjusted using the bottling end seals..

Italian quality product from a company with over 20 years of experience. EnolMaster is a self-priming bottling device for small producers. Suitable bottle opening 16-28mm and height 180-330mm. Productivity: up to 600 bottles/hour. Special pyrex glass overflow container. Bottling nozzles can be calibrated..

Can filling device and capper for cans of different sizes (bottling open to the air): diameter 63-66 and different heights - 33cl...50cl. Productivity up to 1200 cans/h. Electricity 220V/24V, compressed air supply required 6bar, working room temperature +2C...+40C. On a stainless steel frame. Bottled beverage temperature 0...+2C to reduce foam, carbonation level 4.5...5.5g/l, bottling from an isobaric container with precise pressure control (pressure fluctuation in the container causes incorrect bottling results in cans). Electronic control panel, dosing of CO2 into the can before bottling, after bottling, mechanical lid closer, automatic tare weight control after bottling, technical maintenance possible via internet cable. Dimensions: length 2500mm, height 3010mm, width 950mm. The device includes: the described device and a round pick-up table. Made in Italy..