Gas Reduction CO2 Sherman Profi

Bring the CO2 cylinder we sold back to us and you will immediately receive a new one filled..

Return our sold CO2 cylinder to us and you will immediately receive a new filled cylinder. When purchasing a cylinder filling in the e-store, it is assumed that you send the empty cylinder to us by courier first..

Brass hose connection kit with nut and sprue connection for sherman pro reducer..

Filled CO2 cylinder (min.50bar). Size 2L/1.5kg; pressure max. 150 bar. dimensions ø100 x 435, weight 5kg. The cylinder and valve are manufactured according to EN 1964: 1999 and are π-marked for ADR / RID compliance. Balloons can be filled/sent to our address in Pärnu. Also buy a CO2 reducer.

Filled CO2 cylinder (min. 50bar). Size 8L/6kg; pressure max. 200 bar; dimensions 136x820mm, weight 16.5kg. A reducer with an input thread of 21.8mm is suitable. Keere The protective cover protects the valve from damage during transport or storage. The cylinder and valve are manufactured according to EN 1964: 1999 and are π-marked for ADR / RID compliance. Balloons can be filled at our Pärnu unit. Also buy a CO2 reducer.

Regulator-reducer for two different output CO2 cylinders with variable output pressure regulation. Enables lowering the pressure of the gases leaving the cylinder to the required working level pressure and ensures that the pressure is kept automatically and as constant as possible - regardless of changes in the inlet pressure. The regulator is equipped with a safety valve. One monometer indicates the level of compressed air in the CO2 cylinder and the other in the output piping. The pressures of the output pipelines are separately adjustable. Technical data: input thread W21.8x1 1 14 (connection to cylinder). Buy more hose connectors if necessary..

CO2 cylinder regulator-reducer with variable output pressure regulation. Enables lowering the pressure of the gases leaving the cylinder to the required working level pressure and ensures that the pressure is kept automatically and as constant as possible - regardless of changes in the inlet pressure. The regulator is equipped with a safety valve. One monometer indicates the level of compressed air in the CO2 cylinder and the other in the output piping. The pressures of the output pipelines are separately adjustable. Technical data: input thread W21.8x1 1 14 (connection to cylinder). Buy more hose connectors if necessary..

Regulator-reducer for two different output CO2 cylinders with variable output pressure regulation. Enables lowering the pressure of the gases leaving the cylinder to the required working level pressure and ensures that the pressure is kept automatically and as constant as possible - regardless of changes in the inlet pressure. The regulator is equipped with a safety valve. One monometer indicates the level of compressed air in the CO2 cylinder and the other in the output piping. The pressures of the output pipelines are separately adjustable. Technical data: input thread W21.8x1 1 14 (connection to cylinder). Buy more hose connectors if necessary..

Alcohol meter according to DIN 12 803 with thermometer + 5 + 25 °C: accuracy 0.2. Intended ethanol % vol. for measurement. III class. Scale value 0.1%, Standard temperature 20 °C, Total length ±330 mm Extras: Manufacturer's calibration approx. 95 eur+Km.

For measuring the sugar content and temperature of beer wort. Length: 22.5 cm, Fits min. 100 ml measuring cylinder. A hydrometer or densimeter helps measure the density of a liquid. When brewing beer, this wort is used to measure the sugar content. A hydrometer is a float with a scale on top. To measure the reading of the hydrometer, the wort is separated into a measuring cylinder, in which the hydrometer is placed to swell. Readings can be read from the water line of the WortHydrometer. According to how deep the hydrometer sinks into the liquid, the reading also depends. For example, the density of pure water is 1.000, but if there are sugars mixed into the water, the reading rises above 1.000. However, the density of alcohol is lower than that of pure water, the density of absolute alcohol is 0.789. Therefore, the initial density of the wort can be, for example, 1.050 and the final density 1.010. The alcohol content in beer is determined by how much sugar has been fermented into ethanol, i.e. the difference between the initial density and the final density is measured. Alcoholic content (ABV) depends on initial density (OG) and final density (FG) as follows: ABV = (OG – FG) * 131.25. So if OG=1.050 and FG= 1.010, then ABV= (1.050 – 1.010) * 131.25= 0.04 * 131.25=5.25%. You can use a calculator to make measurements easier. The hydrometer reading is set to measure in water at 20ºC. Otherwise, you can use a temperature matching calculator to get the correct reading. In general, hobby brewers use the specific gravity scale, which reads as 1.0xx, to measure density, but the Plato scale, which is measured in degrees, is also often used. Before taking a hydrometer reading, observe what scales are on your hydrometer. The strength of wine is measured as follows: For example, the sugar content of wine before fermentation is +80 and -5 after. The formula for alcohol content is: 85:7.5 =11.33%. The starting and ending sugar content must be added together and divided by 7.5. ​What is a densimeter and why is it necessary? A hydrometer or densimeter is a gadget that measures the density of a liquid. This wort is used to measure the sugar content when brewing beer and beer. A densimeter is essentially a float with a scale on it. The scale shows how deep it sinks into the liquid and the reading is read from the water line. The result shows the ratio of the density of the liquid to the density of pure water. The density of pure water when measured with a hydrometer is always 1.000. If sugars or other soluble substances (for example, salt) are mixed into the water, we will get a reading higher than 1,000. However, the density of alcohol is generally lower than the density of pure water, so the reading of an alcohol-rich liquid is below 1,000. The readings of the densimeter are set for measurement in a liquid at 15 degrees (Celsius), so it is worth making sure that the liquid is more or less at this temperature at the time of measurement. A simple densimeter can be obtained from a store at a price of 5-15 euros. Densimeters are available with one and three scales. A single-scale densimeter only shows specific gravity. In addition to the specific gravity, the three-scale densimeter shows the sugar content in g/l and the potential alcohol content in the finished drink. For example, in the case of flounder, the densimeter reading should remain at the limit of 1020 on the specific gravity scale..

Highly accurate, digital pH meter, professional use model. With a refillable measuring electrode that calibrates the electrode and ensures an accurate result. Features: built-in thermometer (°C / °F); automatic temperature corrections (ATC): -5°C to +90°C / 25°F to 194°F; Digital display of pH and temperature with stabilization reading; easy 2 or 3 point calibration with automatic detection of the calibration fluid; refillable flat electrode, also for measuring the pH of solids and semi-solids (skin, meat, cheese, etc.). Filling the electrode significantly extends its life. The electrode should only be replaced if damaged. Measurement is also possible for low liquid levels and also for surfaces. RENEW function: warns when the electrode needs to be replaced. CAL function: warns when the electrode needs to be calibrated. MEMORY for 15 readings: pH and temperature; HOLD function; measuring scale pH: 0.00-14.00 pH; temperature: -5 to +90°C / 25 to 194°F; accuracy: ± 0.01, ± 1°C; IP67 or waterproof, automatic shutdown after 10 minutes, electrode protective cover, replacement membrane, instructions, 4 Li-ion batteries CR2032, Warranty: 1 year meter, 6 months electrode. What is pH? pH is a measurement of the concentration of free hydrogen ions in a liquid. The pH of pure water is 7. Liquids with a higher concentration of hydrogen ions than water are acids and the pH value is less than 7. Liquids with a lower concentration of hydrogen ions are more alkaline and the pH value is greater than 7. The calculated pH value is 1-14..

Digital platform scale with stainless surface. The battery supply and additional battery container allows up to 1000 hours of operation. Max. weight 15kg and accuracy +/- 2...5g. Scale size 360x580x765(h)mm and working surface 333x235mm, working temperature -10C... +40C, digital display, weight 15kg. Calibrable and reproducible..

400ml measuring cylinder made of strong PP plastic.