Filter fabric 50µm 140cm, reusable (100x140cm)

Reusable and washable filter fabric for pump filtration. Specially developed for filtering food oils.

Reusable and washable filter fabric for pump filtration. Specially developed for filtering food oils.

Reusable and washable filter fabric for pump filtration. Specially developed for filtering food oils.

100% cotton. Can be washed at temperatures up to 95 °C.

Strong cotton filter bag with 60L basket for hydraulic press..

Stainless filter with 2mm openings, which is suitable for use in several purposes. When pre-filtering the pressed juice, place the filter in the container and fasten it. Then direct the juice to the filter, where the larger sediment remains in the filter and the juice flows through the filter into the container. Extraction of juice from crushed juice residues. Place the filter in the ee-crushed raw material container. The juice then seeps into the filter, where it is pumped out. In this way, the work of pressing is faster, since a part of the juice has already been removed. Filter dimensions: height 100cm and diameter 15cm. Perforated filter 2mmx3.5mm.

.

Stainless sieve 260x570mm. Do not machine wash..

Multipurpose filters for juice filtration. For use in a juice post-filter system, i.e. larger sediment must be removed with a pre-filter. Filter size 20x20cm. 100 pcs in a package. The filters are made of pure natural materials such as various cellulose layer fibers obtained from hardwoods and conifers, diatomaceous earth and perlite. The filters themselves are biodegradable. How to place the filter? Filters require careful handling when inserted into the plate filter. Avoid rotating, bending and rubbing the filter element. Do not use a damaged filter. Each filter plate has a rough side and a smooth side. Wetted pads are sterilized with steam or hot water before filtration. After sterilizing, gently unscrew the tensioned pads from the casing and allow to cool before use. Sterilization: hot water (soft and clean): 25 minutes at +85°C, measured at exit (at least 0.5 bar exit pressure). Steam (clean) up to a maximum of 134°C, about 20 minutes. Then rinse with clean water (50ml/m²). Regeneration First rinse with cold water (15-20°C) for 5 minutes in the direction of filtration. Rinse with hot water (60-80 ° C) for 10 minutes in the opposite direction. Attention: moistened pads must be reused as soon as possible..