Filling unit ENOLMATIC, foaming drink

Back pressure isobaric small bottler for hobby use. Productivity 80-90pdl/h. Made in Sweden! Dimensions of suitable bottles: height 175-310cm and bottle mouth 26mm. Extras (indicate immediately when ordering): Swing-top bottle bottling nozzle +25EUR Using the device: 1. Connect the bottler to the CO2 and bottle of the liquid to be bottled 2. Place the bottle under the device 3. Fill the bottle with CO2 by pressing the black "+" button 4. Press to the pressure release "-" button 5. Fill the bottle with CO2 by pressing the black "+" button 6. Points no. 3 and 4 should be repeated for min. 2x to ensure sufficient CO2 concentration in the bottle, but lastly, always press the "+" button before bottling 7. Open the liquid supply valve and close the container when it is full..

Stainless gravity hot bottling device for 6 bottles. Made in Italy. Bottling nozzles 15mm; thermometer, adjustment of the amount of liquid on the bottle tips; stainless drain valve; productivity 980l/h; Size: 860x1800x650 mm; Weight 80 kg. Additional equipment: pump, electronic inlet valve, foam reduction valve (e.g. when bottling beer), bottling nozzles 17mm, filter, CO2 dosing into an empty bottle, electronic volume sensor..

The perfect siphon! Don't waste your time with too small a siphon - use Brewferm Flow'in. The siphon has a fixing clip to determine the correct height and secure it securely. The siphon also has a sediment filter with a non-return valve to remove unwanted particles. Specifications: Anti-drip set, automatic flow, clamp for stable installation and height adjustment, sediment filter, bottle filler, Material: PVC, Food grade, length 34.5cm, diameter 25mm.

Sterile bottler for wines, juices and other liquids. Professional and adjustable bottling valves, the bottle filling process starts automatically when the bottle is pushed under the valve, the filling stops automatically when the desired filling height is reached, the bottle height, bottle diameter and filling height can be easily adjusted, with a stainless steel container. The device can be adjusted according to the height and diameter of the bottle. The filling system can also be used to fill special bottles by changing bottle centering plates, which can be ordered separately. The upper part of the TA5VA models (juice container with valves) rotates with an electric motor at an adjustable speed. The flow of juice to the intermediate storage tank is controlled by the piping inside the central stem, the connecting valve is located in the lower part of the unit. Technical data: power consumption 60W/230V, dimensions 500x500x1630mm, weight 34kg, bottling nozzles 5pcs, productivity/throughput 750l/h, tank size 26l, bottle diameter 76-90mm, max. bottle height 500mm. Additional equipment: automatic filling of the container (26l) with a pump, diameter of bottles 40-120mm.

Model: GFK-160. Voltage: AC180V-260V. Power: 30W. Max. Flow Rate: 0.8 gal/min / 3.2 L/min. Repeat Error: < 0.5%. Filling Volume: 5-3500 ml. Filling Speed: 5-30 bottles/min. Nozzle Diameter: 0.31 in / 8 mm. Anti-Dripping Function: Available. Memory Function out of Power: Available. Suitable Soft Tube:17#(interior diameter: 6.4 mm, thickness: 1.6 mm, max pressure: 0.24Mp). Product Size(L x W x H): 13.8 x 10.7 x 5.9 in / 35 x 27 x 15 cm. Net Weight: 5.5 kg