Filler VEVOR GFK-160, 5-3500ml

Stainless bottling device for 4 bottles. Made in Italy. Bottling nozzles 15mm; adjustment of the amount of liquid on the bottle tips; stainless drain valve; productivity 700l/h; Size: 580x1070x500 mm; Weight 38 kg. Additional equipment: mechanical or electronic volume sensor, pump, electronic input valve, foam reduction valve (e.g. when bottling beer), bottling nozzles 17mm..

Italian quality product from a company with over 20 years of experience. EnolMaster is a self-priming bottling device for small producers. Suitable bottle opening 16-28mm and height 180-330mm. Productivity: up to 600 bottles/hour..

Sterile bottler for wines, juices and other liquids. Professional and adjustable bottling valves, the bottle filling process starts automatically when the bottle is pushed under the valve, the filling stops automatically when the desired filling height is reached, the bottle height, bottle diameter and filling height can be easily adjusted, with a stainless steel container. The device can be adjusted according to the height and diameter of the bottle. The filling system can also be used to fill special bottles by changing bottle centering plates, which can be ordered separately. The upper part of the TA5VA models (juice container with valves) rotates with an electric motor at an adjustable speed. The flow of juice to the intermediate storage tank is controlled by the piping inside the central stem, the connecting valve is located in the lower part of the unit. Technical data: power consumption 60W/230V, dimensions 500x500x1630mm, weight 34kg, bottling nozzles 5pcs, productivity/throughput 750l/h, tank size 26l, bottle diameter 76-90mm, max. bottle height 500mm. Additional equipment: automatic filling of the container (26l) with a pump, diameter of bottles 40-120mm.

Sterile bottler for wines, juices and other liquids. Professional and adjustable bottling valves, the bottle filling process starts automatically when the bottle is pushed under the valve, the filling stops automatically when the desired filling height is reached, the bottle height, bottle diameter and filling height can be easily adjusted, with a stainless steel container. The device can be adjusted according to the height and diameter of the bottle. The filling system can also be used to fill special bottles by changing bottle centering plates, which can be ordered separately. The upper part of the TA8VA models (juice tank with valves) rotates with an electric motor at an adjustable speed. The flow of juice to the intermediate storage tank is controlled by the piping inside the central stem, the connecting valve is located in the lower part of the unit. Technical data: power consumption 60W/230V, dimensions 500x500x1800mm, weight 50kg, bottling nozzles 8pcs, productivity/throughput 1000l/h, tank size 50l, bottle diameter 76-90mm, max. bottle height 500mm. Additional equipment: automatic filling of the container (26l) with a pump, diameter of bottles 40-120mm.

Can filling device and capper for cans of different sizes (bottling open to the air): diameter 63-66 and different heights - 33cl...50cl. Productivity up to 1200 cans/h. Electricity 220V/24V, compressed air supply required 6bar, working room temperature +2C...+40C. On a stainless steel frame. Bottled beverage temperature 0...+2C to reduce foam, carbonation level 4.5...5.5g/l, bottling from an isobaric container with precise pressure control (pressure fluctuation in the container causes incorrect bottling results in cans). Electronic control panel, dosing of CO2 into the can before bottling, after bottling, mechanical lid closer, automatic tare weight control after bottling, technical maintenance possible via internet cable. Dimensions: length 2500mm, height 3010mm, width 950mm. The device includes: the described device and a round pick-up table. Made in Italy..