Duotight BlowTie spunding valve

The Duotight Flow Stopper is a convenient device to use when filling closed drums or during filtering between drums. Operation: Mount the device to the CO2 outlet of your keg...then when the keg is full, it will automatically cut off the flow and prevent excess drink from escaping. Tip: For even better results, we recommend using the Flow Stopper with BlowTie spigot valve. The BlowTie allows you to apply pressure to the barrel, which means you can control the flow rate and reduce foaming during the filling process. To connect the BlowTie you need a short piece of pipe (8mm except related products below)..

18.9L KEG pressure tank ball-lock quick coupling with 1/4 thread..

CO2'he air tube with a blue stripe..

Fitting 5/18 internal thread as transition to 8mm pipe. Fits anyone with ball-lock quick couplers.

Prepare your home wine or beer easily and quickly in a 16-liter plastic fermentation vessel, which comes with a bottom valve and calibrated liter measuring lines. The lid of the container has a sealed hole into which the airlock is placed..

This all-new ball lock disconnect sets a new bar! The integrated duotight design allows you to connect your beer and gas line directly, easily, and reliably without additional fittings or clamps. Its robust and compact design makes assembly and disassembly incredibly easy, simplifying cleaning and sanitising. Made from highly chemical-resistant materials with stainless steel springs and ball bearings—no cheap ABS plastics—this ball lock resists commonly used chemicals such as phosphoric-based sanitisers and caustics. Its small size allows for easy keg stacking, and the new cap design ensures a pressure seal with just hand tightening. It can be fully disassembled for cleaning without any tools. The durable and compact design makes this the best value and most well-designed homebrew quick disconnect ever created. This particular ball lock disconnect is designed for an 8 mm beer line, with an integrated duotight fitting that allows the line to push directly into the connector.

Pressure control kit with integrated manometer and valve. Ideal for controlling the pressure in the pressure vessel or for carrying out the fermentation process in a light pressure environment, the so-called using as an air lock. An adjustable screw on the side allows you to increase and decrease the exact set pressure. With a screwdriver, you can easily disassemble the BlowTie assembly for thorough cleaning. Specification: suitable for pressure 0-15 psi (0 to 1 bar), made of food grade polyacetal (POM: polyoxymethylene), stainless steel screws, 8mm pipe (5/16") quick connection on both sides.

Nothing tastes better than a freshly poured pint. With the Beerstream, you can now dispense your beer using a pressure barrel and Sodastream-compatible CO2 cylinders. Have you wondered if a soda-keg is right for you but worried about lugging a heavy CO2 bottle and frequent refills? The Beerstream eliminates this hassle, allowing you to use Sodastream-compatible CO2 cylinders to serve your beer. You can easily set the pressure from 0-2 bar with stepless adjustment and monitor it on a clear manometer. The standard 1/4" MFL connection ensures quick and easy setup with your soda-keg. The Beerstream is incredibly user-friendly, complete with a detailed user manual. It is far more economical than using 8 or 16-gram CO2 cartridges and lets you dispense up to 6 soda-kegs with a single Sodastream cylinder. The product comes with a 3-year warranty. Included in the set: Brewferm Beerstream pressure regulator (0-2 bar), Brewferm Beerstream holder for soda-keg, 2 Duotight FFL push-in couplings (8 mm), 30 cm EVABarrier hose (8 mm), and a CO2 ball-lock connector. Note: CO2 cylinder is not included and is not compatible with pink quick-connect cylinders.

Airlock grommet for metal or plastic container.

Beer tap for cornelius 18.9L ball-lock container - with ball-lock quick connection..

Conical silicone cap to seal the neck of the bottle and connect the air lock..

Filled N2 = nitrogen cylinder (min. 50bar). Size 8L/6kg; pressure max. 200 bar; dimensions 136x820mm, weight 16.5kg. A reducer with an input thread of 21.8mm is suitable. Keere The protective cover protects the valve from damage during transport or storage. The cylinder and valve are manufactured according to EN 1964: 1999 and are π-marked for ADR / RID compliance. Balloons can be filled at our Pärnu unit. Also buy a CO2 reducer.

8L pressure tank ball-lock connection fittings set with pressure relief valve