Digital Illuminated Mini Gauge 0-90psi (0-6.2bar) for Integrated Blowtie and In-line regulators

Manometer for CO2 pressure with 1/4 thread.

Manometer for CO2 pressure with 1/4 thread.

Manometer, dimensions (L x W x H) 140 x 110 x 150 mm.

Manometer for CO2 pressure with 1/4 thread.

Single-stage CO2 cylinder regulator-regulator with variable output pressure control. Allows the gases leaving the cylinder to be depressurized to the required level/pressure and ensures that the pressure is kept as constant as possible at the outlet... regardless of the change in inlet pressure. The regulator is equipped with a safety valve through which excess gas released from the exhaust pressure chamber exits. One monometer indicates the level of compressed air in the CO2 cylinder and the other in the output piping. For example, if you want to pressurize your tank with 3bar, the manometer must be in the position 10l/min, and for 2bar, 7l/min. Bar / l/min unit conversion table included. Technical data: input pressure 185bar, output pressure 0.5-10bar, output capacity 15m3/h, input thread W21.8x1 1 14, output nut thread G1/4 and pipe connection 6.3mm. 

Manometer for CO2 pressure with 1/4 thread.

Manometer for CO2 pressure with 1/4 thread.

Manometer for CO2 pressure with 1/4 thread.

Handy carbonation meter for determining the CO2 pressure of beer, water, etc. in bottles with a crown cap (0.25-0.7 l) and for monitoring the second fermentation. With a needle that pierces the crown cap. Range: 0-6 bar, accuracy: 0.1 bar, for 26mm crown cap, Attention, this product does not work on the following bottles: Beer bottle Belge 75 cl, crown cap 26 mm, Champagne bottle 75 cl, crown cap 26 mm.