Cylinder adapter W21.8 male thread x TR21-4 female thread, for Sodastream

Ballooniadapter deluxe W21.8 välis x TR21-4 sisekeere, Sodastreamile. Oled väsinud gaasi kadumisest iga kord, kui ühendad või lahutad oma Sodastreami ballooni tavalise adapteriga? See uus disain on just see, mida vajad. Sellel adapteril on lisaeelis - saad kasutada külgmist kruviga nuppu, et vajutada alla adapter keskel olevat tihvti. See tihvti reguleerimise võimalus muudab Sodastreami ballooniadapteri kasutamise oluliselt lihtsamaks. Tavalised Sodastreami adapterid vajavad tihvti kõrguse reguleerimiseks kuuskantvõtit ja sõltuvalt sellest, kui kulunud on su tihend, võib olla vaja seda tihvti perioodiliselt reguleerida. Lisaks kipuvad konventsionaalsed odavamad Sodastreami adapterid gaasi lekkima iga kord, kui ühendad neid regulaatoriga või adapteriga. See on samuti tülikas. See uus Sodastreami adapter on märkimisväärselt parema disainiga - käepärane kruviga nupp seadme küljel võimaldab sul vältida tülikaid reguleerimisi ning annab sulle võimaluse gaasivoogu sisse ja välja lülitada. Seda adapterit kasutatakse juhul, kui sul on Sodastreami balloon ja soovid kasutada tavapärast Type 30 regulaatorit, näiteks grillimiseks või piknikuks. Kui sa ei soovi kaasas kanda oma 6 kg või 2,6 kg gaasiballooni, siis see adapter võimaldab sul luua käepärase kaasaskantava süsteemi. Ideaalne väikese koguse kasutajale või kellelegi, kes pole veel suurt gaasiballooni soetanud. Adapteri kasutamine on lihtne - keerake adapter Sodastreami balloonile, ühendage regulaator adapteriga ja olete valmis gaasi kasutama. Külgmine reguleerimisnupp võimaldab täpset gaasikulu kontrolli.

Mini CO2 Balloon Holder for KEG Barrel with CO2 Balloon Practical accessory for 18.9L KEG pressure barrel that ensures freshness and proper carbonation of your beverages. The holder is equipped with a 1/4" thread and is ideal for use with white ball-lock quick connect. Container size: fits 18.9L KEG barrel Thread type: 1/4" Kit includes: holder and 1 CO2 mini balloon Compatibility: white ball-lock quick connect (sold separately) Easy to install and use, ensures constant CO2 pressure in the barrel. Thanks to its compact design, the device doesn't take up excessive space and fits well in home or smaller commercial use. Note: For a complete system, you need to purchase a white ball-lock quick connect with 1/4" thread separately.

CO2 Cylinder Regulator-Reducer with Two Outputs - Professional Pressure Control. Precise dual-outlet CO2 cylinder regulator-reducer allows separate pressure control for both outputs. This professional device ensures automatic and stable pressure control, regardless of inlet pressure fluctuations. Key Features: System with two separately adjustable outputs. Equipped with safety relief valve. Precise pressure indication with two gauges. Input thread: W21.8x1 1/14 for cylinder connection. Reliable Pressure Control: The regulator-reducer automatically converts high cylinder pressure to desired working pressure. The device has two pressure gauges - one shows cylinder pressure, the other shows output pressure in the lines. NOTE! Fittings for hose connections must be purchased separately.

Mini DuoTight Balloon Regulator (6.35mm) for 16g and 74g balloons. This regulator is equipped with a 6.35mm duotight compatible connection, allowing you to connect almost anything in just a few seconds. Please note that if liquid passes through the regulator, it becomes unusable. Be especially careful with overfilling kegs or tilting them when the gas runs out. The regulator is limited to 30psi (2.1 bar) to ensure you don't accidentally over-carbonate or exceed the keg's pressure rating. However, the pressure gauge shows up to 60psi (4.1 bar) in case of heat intrusion/expansion to prevent damage to the gauge. Using the regulator is simple: attach the regulator to the gas balloon, connect the hose with the duotight connection, and adjust to desired pressure. The device is ideal for carbonating and serving homebrew beer, allowing precise pressure control.

Mini Core 360 adapter for 74-gram CO2 cylinder (TR21-4 male x 5/8-18UNF female). This adapter for Mini Core 360 regulator allows you to use a larger disposable 74-gram CO2 cylinder so you can take your keg system anywhere. This adapter compatible with Mini Core 360 regulator is available, allowing connection of larger 74-gram CO2 cylinders. These larger 74-gram CO2 cylinders have enough capacity to dispense almost an entire 19-liter keg of beer, making them an excellent choice for portable keg systems. NOTE: The regulator itself and 74-gram cylinders must be purchased separately. Thread specifications: Male thread: TR21-4, Female thread: 5/8-18UNF. These larger 74-gram disposable CO2 cylinders use a larger thread than 16-gram cylinders, which means the standard adapter fitting of the Mini Core 360 regulator is not compatible with these larger disposable cylinders. Product usage principle: The adapter connects to the Mini Core 360 regulator, allowing the use of a larger CO2 cylinder for dispensing beer from the keg. The larger cylinder ensures longer usage time and is well-suited for portable systems.

High-pressure extension hose 180cm, for cylinders. This high-pressure extension hose is designed for use with pressures up to 300 bar. The hose is made with quality brass Type 30 female-male fittings. The extension hose length is 180 cm (1.8 meters). The high-pressure extension hose is manufactured with Type 30 CO2 male thread on one end and Type 30 CO2 female thread on the other end. This useful device allows you to position the pressure regulator away from the gas cylinder. Its purpose is to enable you to place the gas cylinder on the floor and then mount the CO2 regulator on the wall or gas panel where it's convenient and at eye level. The extension hose is particularly useful when assembling your CO2 gas panels. The hose ensures a safe and reliable connection between cylinders and regulators, allowing for more flexible equipment placement. Operating principle: The extension hose connects to the cylinder on one end and to the pressure regulator on the other end, enabling more flexible system configuration and better ergonomics when using gas supply.