Colloidal generator gold rod 99,99% 1,5x55mm

The kit consists of: 1pc full electrode made of over 2g of pure gold and a 3mm adapter made of over 1g of pure silver (> 99.99%) to be added to the Ionic-Pulser®. Use a stainless steel electrode as the cathode. The kit is suitable for the production of colloidal gold with the Ionic-Pulser ® PRO3, where the anode and cathode are clearly marked. A gold electrode is used as the anode, and a stainless steel electrode as the cathode. This combination is only possible with devices that operate on pure DC voltage, since the material is released only through the anode. Notes: The production time of colloidal gold differs significantly from that of colloidal silver. This fact affects not only the Ionic Pulser, but basically all devices that operate in a similar voltage range and are intended to produce colloidal gold. It is a property of gold that significantly less material is released into the solution. It takes several hundred times more time to get the same concentration as colloidal silver. However, these concentrations are by no means necessary for colloidal gold. They are more in the homeopathic area and are perfectly adequate, as the effect of colloidal gold is fundamentally different from that of colloidal silver. As a rough guideline, it can be assumed: 200 ml / within 10-12 hours gives a concentration <1 ppm - or better: the concentration corresponds approximately to the homeopathic strength D6. Delivery set: 1 full-color electrode (anode) with fine silver adapter Ø 3 mm 1 stainless steel electrode (cathode) Ø 3 mm 1 user manual.