Brewing Kettle 35L BrewZilla Gen 3.1.1 with Pump 1900/500W

Cooling Coil Heat Exchanger 35L BrewZilla Gen 4 + 3.1.1 - Stainless Steel Immersion Chiller. Sold with the BrewZilla series, these compact immersion chillers are excellent for cooling up to 35L of wort to fermentation temperature. An ideal solution for those using smaller pots. Usage Method 1: This chiller can be used by simply connecting a garden hose to both ends of the chiller. You can slide the garden hose directly onto the chiller ends and secure with stepless hose clamps. Alternatively, use pressure fittings for better connection. Then lower the chiller into hot wort and let water flow through the chiller until desired temperature is reached. When water flows through the chiller, stirring the hot wort significantly helps with heat transfer from the wort to the cooling coil and reduces cooling time by more than half. Usage Method 2: The second method involves pumping hot wort through the center of the chiller. Use silicone tubing to connect the kettle to the pump and then through this coil chiller and back to the kettle. Turn on the pump and ensure the chiller reaches wort boiling temperature to sterilize the coil with heat. Then place the coil in a bucket with ice and water mixture. Run the pump continuously until the wort cools to desired temperature. Dimensions: Chiller coiled section: 24 cm high x 19 cm diameter, Total chiller height: 41 cm, Tubing: 12.7 mm, 304 stainless steel. The cooling coil heat exchanger is an essential component in home beer brewing that allows quick cooling of hot wort to fermentation temperature. Rapid cooling helps maintain beer quality and prevent unwanted flavor development.

Adjustable Lid Clamps for BrewZilla + DigiBoil, short (4pcs). These 4 adjustable stainless steel clamps fit 35L and 65L BrewZilla Gen 3 to Gen 4 models and all 35L and 65L DigiBoil units. The set is also compatible with 12L and 24L Boiler Extensions products. Installation instructions: 1. You'll need pliers or tin snips to remove the existing clamp. (See product images for optimal cutting point) 2. Remove the nut and bolt and thread it through the clamp. Ensure the grooved part faces outward (see image). If the grooved part isn't facing outward, the clamp may slip off the round edge of the kettle. 3. Loosen the bolts and rotate the clamp up or down to adjust tension. Use the nuts to lock in desired tension. Always start looser and then tighten as needed. Warning: Do not use clamps or adjustable clamps with glass lids, as the clamps are designed only for metal steam condensers or distillation lids. Adjustable lid clamps are essential accessories that ensure secure and safe lid attachment during brewing or liquid heating. These clamps are made from durable stainless steel, allowing for long-term use in various conditions.

35L Pro distillation/steam condenser lid with sight glass (compatible with BrewZilla, Digiboil, Robobrew units) - 2-inch Tri-clover connection - 3-inch sight glass. Compatible with 35L Gen 4 and Gen 3 BrewZilla, 35L Digiboil, and older model Robobrew units. Designed for exceptional strength when using heavier distillers or asymmetric steam condenser units. Now you can monitor your wort boiling and see if it's foaming or at risk of boiling over. When brewing beer indoors and using the steam condenser lid kit, without having to remove the entire lid to add hops/salts, simply remove the 3-inch sight glass and add ingredients (use caution when unit is hot). PPSU is an excellent choice for components exposed to high temperatures (up to 200°C) and corrosive substances due to its exceptional chemical resistance. It's also extremely impact-resistant. We chose this type of plastic because it has better thermal and mechanical properties and, as a bonus, it's transparent. This allows us to mold complex parts that would be almost impossible to produce from stainless steel or laboratory-grade glass. As it's a very unique plastic, its price per kilogram is much higher than other industrial plastics. So much so that it costs more than stainless steel. Specifications: Thicker silicone O-ring for tighter seal, 2-inch Tri-clover top connection port, 3-inch sight glass connection. Includes 3-inch PPSU sight glass disc, 3-inch Tri-Clover clamp, and 3-inch Tri-Clover silicone gasket. This device is designed for use with DigiBoil and BrewZilla 35L units. We don't have data on whether clamps from other manufacturers' kettles will fit to create a complete seal. Product usage principle: This brewing lid allows monitoring of distillation or brewing process through the sight glass without having to remove the lid completely. Especially suitable when working with a steam condenser and allows easy addition of ingredients through the sight glass opening.

Brewferm® 50L Stainless Steel Brewing Kettle - Professional Choice for Home Beer Brewing The high-quality Brewferm® brewing kettle is made of durable AISI 443 brushed stainless steel, ensuring long-term use for home beer brewing. The kettle has a 50-liter capacity and its compact dimensions (40 x 40 cm) make it convenient to use. Technical advantages of the brewing kettle: Optimal wall thickness of 1.0 mm and reinforced 4 mm bottom, high-quality ½-inch 3-piece ball valve, ergonomic handles for safe handling, universal use on all stoves, including induction. The kettle's design allows for quick and even heating, which is crucial for beer brewing. Thanks to smooth surfaces, the kettle is easy to clean. The product comes with a reliable 3-year warranty. To enhance the brewing experience, a special brewing bag or stainless steel filter can be purchased separately.

Brewferm® 35L Professional Brewing Kettle for Induction Cooktop This high-quality AISI 443 brushed stainless steel brewing kettle is an ideal choice for both home beer brewing and other food preparation processes. Thanks to its durable construction and universal design, this kettle is suitable for all stovetops, including induction cooktops. Technical Specifications: Volume: 35 liters Dimensions: 36 x 36 cm (diameter x height) Wall thickness: 1.0 mm Bottom thickness: 4 mm Material: AISI 443 stainless steel Key Features: Professional ½-inch 3-piece ball valve Ergonomic handles for safe handling Even and quick heat distribution Easy to clean thanks to quality surface treatment 3-year manufacturer warranty The brewing kettle's functionality can be expanded with separately sold accessories such as a brewing bag or stainless steel strainer.

Brew Monk Beer Brewing System - 45L Fully Automatic Brewing Kettle Brew Monk is a perfect stainless steel brewing system that combines three essential processes: mashing, filtering, and boiling. The device allows you to produce up to 45 liters of quality wort in a single brewing session. Main Features: Powerful 3000W heating element - 25% more efficient than other devices on the market. Programmable control panel for 9 different stages and hop additions. Integrated stainless steel malt container for up to 12kg of malt. Adjustable malt filter and removable handle. Technical Specifications: Total volume: 52 liters (working volume 45L). Dimensions: 69x35cm. Material: AISI 304 stainless steel. Power: adjustable 100-3000W (in 100W increments). Operating temperature: 25-100°C (accuracy 0.1°C). Power supply: 220V, 50Hz. Additional Features: Separately controlled magnetic pump for circulation. Digital LCD display. Memory for storing up to 9 recipes. Glass viewing window for process monitoring. Stainless steel bazooka filter. ½" ball valve for liquid discharge. The device comes with a 3-year warranty and is ideal for both beginners and experienced home brewers.

Professional 50L Stainless Steel Brewing Kettle for Home Use High-quality universal brewing kettle made of AISI 304 stainless steel is an ideal solution for juice pressing and home brewing. The durable 50-liter kettle comes equipped with a practical internal strainer, making juice or beer production convenient and efficient. Technical specifications: Material: AISI 304 stainless steel Volume: 50 liters Diameter: 46 cm Height: 37 cm Wall thickness: 1.0 mm Bottom thickness: 1.5 mm Ball valve: 3/4 inch Kettle advantages: Durable and easy-to-clean stainless steel construction Ergonomic handles for safe handling Suitable for all gas stove types Built-in strainer for efficient filtering Quality 3/4-inch ball valve for controlled liquid release This multipurpose brewing kettle is a reliable assistant for every home juice and beer maker, ensuring long service life and quality results.

Home Brewing System 60L Stainless Steel High-quality home brewing system, made of AISI 304 stainless steel, with 60-liter capacity. Perfect for brewing beer from malts. Main features: Automatic mode for storing 9 recipes (each recipe up to 9 steps), Manual mode for advanced brewers, Digital control panel for easier use, Precise temperature control between 25°C-100°C (accuracy 0.1°C), Built-in pump for uniform mash mixing. Technical specifications: Power: 3000W, Diameter: 400mm, Height: 780mm, Volume: 60L. Equipment: Tempered glass lid, Built-in scale (5L scale), External glass tube indicator (1L scale), Stainless steel false bottom. Note! The set includes all necessary components except the cooler.

Professional Home Brewing Equipment 40L Stainless Steel High-quality home brewing equipment for making beer from malts, made of AISI 304 stainless steel. The device is equipped with a modern control panel and is suitable for both beginners and experienced brewers. Main features: Capacity: 40 liters Power: 2500W Temperature range: 25-100°C (accuracy 0.1°C) Tempered glass lid Built-in circulation pump Smart features: Storage capacity for 9 recipes Up to 9 work phases per recipe Digital control panel Internal scale with 5L gradation External glass tube indicator with 1L gradation Technical dimensions: Diameter: 400 mm Height: 630 mm AISI 304 stainless steel removable bottom

Pruulimiskatel 32l kooniline, roostevaba. See kvaliteetne pruulimiskatel on valmistatud 304 klassi roostevabast terasest. Keevitused on siledad ja väliskest on passiveeritud, et saavutada matt roostevaba välimus. Toodetud täpselt samal meetodil nagu KegLand 19L uued roostevabast terasest vaadid. Nüüd lisatud 1-tollise nurga all asuva tühjendusklapiga! Seadme sisemuses olev põhi on kuplikujuline/kooniline, mistõttu on seda väga lihtne puhastada, samas kui pöörlev tõmbekäsi võimaldab teil välja lasta iga viimase tilga. See seade sisaldab ka termotasku esiküljel. Komplektis on digitaalne termomeeter (patareid ei kuulu komplekti), nagu näidatud fotodel, kuid termotaskusse sobivad ka erinevad muud termomeetrid, näiteks meie MKII temperatuuri juhtimisseadme sond. Kasutusjuhend otse pakendist: 1. Paigaldage termomeeter ja pöörlev tõmbekäsi pruulimiskatla korpusele. 2. Täitke pruulimiskatel umbes 5 kuni 10 liitri kuuma kuni sooja veega. 3. Lisage kulbitäis StellarClean'i ja segage lusikaga või käega, kandes kaitsekindaid. See aitab eemaldada katla pinnalt allesjäänud masina õli. Avage pöörlev tõmbekäsi, et see samuti puhastada. 4. Valage StellarClean'i ja vee segu välja, seejärel täitke sama koguse sama temperatuuriga veega ja peske välja ülejäänud StellarClean. 5. Kuivatage ja hoiustage enne kasutamist. 6. Enne esimest kasutuskorda kasutage 1 kuni 2 liitrit vett 1,5 ml kuni 3,0 ml StellarSan'iga ja raputage seda, et see muutuks vahuseks ja puudutaks kõiki sisepindu, pöörlevat tõmbekätt, ülemist korki ja õhulukku. Nüüd on see valmis esimeseks pruulimiseks! Õhulukus on hea kasutada veidi desinfitseerimisvahendit või etüül-desinfitseerimisvahendit juhuks, kui vesi muutub seisvaks ja imeb tagasi, nakatades teie pruuli. NB! Alati on parem desinfitseerida vahetult enne anuma kasutamist. Desinfitseerimine ja seejärel hoiule jätmine ei tähenda tingimata, et see on hoiustamise ajal desinfitseeritud. Kõige parem on seda teha enne, kui soovite seda täita. Mõned väiksemad tootmisjärgud võivad esineda, kuid need ei mõjuta mingil moel toote toimivust. Mõõtmed: umbes 650 mm x 400 mm (kõrgus x laius koos kandekäepidemetega). Kooniline pruulimiskatel on mõeldud õlle, siidri või muude jookide pruulimiseks. Kooniline disain aitab settida pärmi ja muudel osakestel katla põhja, võimaldades lihtsamat ja puhtamat vedeliku eraldamist. See sobib ideaalselt nii kodupruulijatele kui ka väikestele pruulikodadele, kes soovivad toota kvaliteetseid jooke.

Brewing Kettle 35L BrewZilla Gen 4.1 with pump 1900/500W BrewZilla Gen 4.1 is a compact single-stage home brewing system that operates from a single 220-240V power outlet. It's a complete solution with timer and step mashing functions. The system is designed for batches up to 30L, making it an ideal solution for those wanting to take their first step into all-grain brewing while maintaining complete control over their batch from start to finish. Features that distinguish this brewing kettle from other brewing equipment: Fully concave drainage system The new bottom design allows complete drainage, meaning you collect every last drop of wort. No more tilting the brewing kettle to get the last drop of wort. This makes the device suitable for CIP cleaning using the new low-volume CIP spray rotor (KL04329). False bottom with pump protection screen One of the main features on all BrewZilla single-stage units is the false bottom protection screen. This screen eliminates the need for whirlpooling and filters the wort, preventing more than 95% of hops and hot break from entering the pump, significantly reducing pump clogging issues common with other brewing equipment. PPSU graduated sight glass (standard in 4.1 version) With the added sight glass, you can sparge with confidence, knowing your BrewZilla level without having to peek from the side/lift out the malt pipe. Adjustable lid clamps (standard in 4.1 version) You can now adjust tension as needed depending on what accessory you're mounting on your BrewZilla. Whether it's an offset still or just a tighter fit for extension sleeves. WARNING: Do not use clamps or adjustable clamps with glass lids, clamps are only for metal steam condensers, distillation lids, or extensions. Ultra-low power density BrewZilla has significantly lower power density than other brewing equipment. The main advantage of lower power density is the ability to produce lighter beers that would otherwise get some caramelization. Ultra-low power density also means less chance of boil-overs, less debris buildup on elements making cleaning easier, and ultimately reduces element wear meaning your elements last longer even with significant use. RAPT/Wifi connectivity The new Gen 4 model is the first BrewZilla to connect to the RAPT portal (https://app.rapt.io/). This portal allows you to track, save, and monitor your brews online. This significantly reduces the need for handwritten brew day notes as everything happens automatically. The RAPT portal also lets you see all previous brews and control the brewing kettle remotely to start water pre-heating remotely or simply monitor the brewing process while doing something else. Get notifications on your mobile phone when to add hops or start boiling. With this easy access and control, RAPT BrewZilla also allows you to fully customize your brew day with profiles exactly tailored to your brewing style or recipe. For example, you can set up your profile to get certain alarms or messages when you need to do something. Such as grain addition when strike temperature is reached. Mash-out alarm when ready for sparging. Salt/hop additions when you've reached boil. As well as hop stand additions or cooling instructions. All with one button press that's pre-programmed for what you want to do. No more egg timer or phone timer needed. Everything is controlled from one place. Bluetooth Gateway device KegLand is currently developing various Bluetooth devices such as the KL24334 RAPT Bluetooth thermometer (low energy BLE) and other sensors that work with this brewing equipment. This brewing kettle can receive BLE beacon signals and transmit this information to the RAPT portal. Also, by receiving multiple BLE thermometer sensors, the brewing kettle is capable of making smarter and more automated decisions on how to control the brewing or distillation process. For example, a BLE thermometer can be placed in cooling water so you get an alarm if the temperature is too high, BLE thermometer can be placed in the center of the malt pipe so you can more accurately control element on/off to achieve malt pipe center temperature etc. Improved bottom design with easily accessible pump The new bottom design means we've enclosed all electronics on the

Professional Stainless Steel Processing Kettle with Mixing Unit - 200L High-quality industrial processing kettle with integrated mixing unit and precise temperature control. Made from durable 18/10 AISI 304 stainless steel. Technical Specifications: Inner diameter: 630 mm Height: 680 mm Motor dimensions: 76 x 83 cm Bottom thickness: 1.5 mm Wall thickness: 1 mm Mixing unit: 14 rotations per minute Power supply: 220V Package includes: Stainless steel outlet valve (1") Analog thermometer with stainless steel protection Reinforced metal lid Stainless steel mixing blades Ergonomic stainless steel handles The vessel is designed for professional food processing, ensuring uniform mixing and precise temperature control. The high quality of materials ensures long service life and hygienic production process.

200L Stainless Steel Industrial Mixing Tank with Temperature Control Professional 200-liter mixing tank is made of high-quality 18/10 stainless steel (AISI 304), ensuring long-term durability and hygienic processing. Technical Specifications: Tank inner diameter: 630 mm Total height: 680 mm Motor dimensions: 76 x 83 cm Bottom thickness: 1.5 mm Wall thickness: 1 mm Mixing speed: 14 rotations per minute Package includes: Stainless steel output valve (1-inch) Analog thermometer with stainless steel protection Reinforced metal lid 220V electric mixer with stainless steel blades Durable stainless steel handles The tank is designed for industrial use and is ideal for mixing liquids and temperature control in the food industry.

High-quality copper jam kettles for professional use Our durable jam kettles are made from high-quality 99.9% food-grade copper, ensuring excellent results when making plum jam. Due to copper's special properties, the jam doesn't stick to the kettle, making the jam cooking process significantly easier. Technical specifications: Inner copper kettle: thickness 1.2 mm Outer steel casing: thickness 1.5 mm Double-shell construction Heating options: Suitable for solid fuel heating Can be used with gas burner (burner not included) The double-shell design ensures even heat distribution and better temperature control when making jam. Durable construction and quality materials ensure long service life of the kettle.

Stainless Steel AISI304 Strainer for Food Filtering High-quality stainless steel AISI304 strainer is an essential tool for filtering juices, syrups, and other liquids. The durable strainer is equipped with 3 sturdy legs (height 50mm) and a practical handle. Strainer Features: Material: AISI304 stainless steel, Hole diameter: 1.5mm, 3 support legs with 50mm height, Sturdy handle for safe handling. The strainer can be used in two ways: Placing at the bottom of the pot, protecting ingredients from burning, As a filter when draining liquids through the pot's bottom opening. This industrial-quality strainer is ideal for juice producers, home juice making, and food processing. The AISI304 stainless steel construction ensures long service life and easy cleaning.

Industrial 300L Gas Boiler with Double Wall - Professional Production Solution. Reliable and durable 300-liter double-walled gas boiler from a renowned Polish manufacturer with production traditions spanning over 60 years. Technical Specifications: Capacity: 300 liters, Internal diameter: 904 mm, External diameter: 1325 mm, Height: 1120/1950 mm, Heat output: 21 kW. Gas Specifications: E (G20) 20 MBR: 2.12 m³/h, LW (G27) 20 MBR: 2.58 m³/h, B/P (G30) 37 MBR: 1.58 kg/h, P (G31) 37 MBR: 1.55 kg/h. Connections: Gas connection: R1/2", Gas exhaust pipe: Type A1, Power supply: 230V 50Hz, Cold water connection: R1/2".