Brewferm Soda keg 23 l

Perfect for carbonating and bottling beer, cider, wine, and many other beverages. The set includes a convenient tap with a hose for dispensing the drink.PRESSURE TANK:A new pressure tank (beer keg) made from high-quality stainless steel, with a convenient weight and size. The tank is easy to fill, empty, and clean, thanks to the large valve on top of the tank. The stainless steel surface is protected by a rubber base ring and a metal handle.Technical specifications:Volume: 23 LDimensions: Height 700mm / Diameter 250mmWeight: 5kgPressure relief valve: 5 barCO2 TANK:A filled CO2 tank (min. 50 bar).Size: 2L / 1.5kgMax. pressure: 150 barDimensions: Ø100 x 435mmWeight: 5kgThe cylinder and valve are manufactured according to the EN 1964: 1999 standard and have the π-mark for compliance with ADR / RID requirements. The tanks can be brought/sent to us in Pärnu for refilling.REGULATOR:CO2 tank regulator-reducer with adjustable output pressure control. It allows the pressure of the gas exiting the tank to be reduced to the necessary operating pressure and ensures that the pressure is maintained automatically and as consistently as possible, regardless of changes in inlet pressure. The regulator is equipped with a safety valve. One manometer shows the CO2 pressure level in the tank, while the other indicates the pressure in the outlet pipes. The outlet pressures can be adjusted separately.

Perfect for carbonating and bottling beer, cider, wine, and many other beverages. The set includes a convenient tap with a hose for dispensing the drink.PRESSURE TANK:A new pressure tank (beer keg) made from high-quality stainless steel, with a convenient weight and size. The tank is easy to fill, empty, and clean, thanks to the large valve on top of the tank. The stainless steel surface is protected by a rubber base ring and a metal handle.Technical specifications:Volume: 18.9LDimensions: Height 555mm / Diameter 232mmWeight: 3.35kgPressure relief valve: 5 barCO2 TANK:A filled CO2 tank (min. 50 bar).Size: 2L / 1.5kgMax. pressure: 150 barDimensions: Ø100 x 435mmWeight: 5kgThe cylinder and valve are manufactured according to the EN 1964: 1999 standard and have the π-mark for compliance with ADR / RID requirements. The tanks can be brought/sent to us in Pärnu for refilling.REGULATOR:CO2 tank regulator-reducer with adjustable output pressure control. It allows the pressure of the gas exiting the tank to be reduced to the necessary operating pressure and ensures that the pressure is maintained automatically and as consistently as possible, regardless of changes in inlet pressure. The regulator is equipped with a safety valve. One manometer shows the CO2 pressure level in the tank, while the other indicates the pressure in the outlet pipes. The outlet pressures can be adjusted separately.

Keep your oxygen-sensitive beverages fresher for longer with the Oxebar Monolayer. This great value, reusable plastic keg is recommended for storing beer for up to 3-6 months. Perfect for sharing beverages with friends, camping trips or barbecues. You can also dispense while it lies on its side. The amber tint protects your beer from damaging light, while the Oxebar Mono PET polymer blend keeps your beverages fresh up to three times longer. Compared to standard PET plastic, Oxebar Mono reduces oxygen ingress and CO2 loss, preserving your beverage and extending its shelf life by up to three times. The 20 l Oxebar Amber PET Keg comes with a pressure relief valve rated to 65psi. It is equipped with a floating dip tube with a cage filter that is easy to undo, making it possible to stack the kegs upside down with disconnects attached. Important: do not exceed 4 Bar / 58psi or 45°C. You can fit up to three of these kegs in a Kegerator Series X cooler, or up to six in a Kegerator Series X PLUS cooler. Included: 1 x 20 l amber Mono Barrier PET Oxebar Keg, 1 x Dual PCO1881 lid assembly with Oxebar black handle, 1 x pressure relief valve (65psi), 1 x 100 cm silicone hose with stainless steel float and hop filter cage, 1 x red multi-gas plastic carbonation cap, 1 x Yellow multi-liquid plastic carbonation cap. Dimensions: 232 mm diameter x 640 mm height.

A container on stainless legs for fermentation and/or short-term storage of wine. The set includes: legs; flat bottom; drain valve on the side 1/2", upper spring cover, floating cover. Dimensions: diameter 565mm and height 1320mm..The size of the tank can vary up to max. +/-10%

Stainless steel container/boiler with mixer and temperature indicator. Complete with: stainless steel outlet valve, analog thermometer with stainless steel guard, heavy metal reinforced lid, mixer with mixing paddles. Material: 18/10 stainless steel (AISI 304); Lid: stainless steel, 220V mixer with stainless steel blades, stainless steel handles, 1" stainless steel outlet valve. Dimensions: inner diameter: 630 mm, height: 680 mm, motor overall dimensions: 76 x 83 cm (h); base thickness: 1.5 mm; wall thickness: 1 mm; without insulation. Mixer 14 rpm..

Boiler / mixing tank stainless base with dimensions 630x630x260h.

With the mixing container, you can adjust the taste of your juice, wine, etc. drink. Complete with a stainless steel mixer with mixing paddles, the speed of which is set to ensure a perfect mixing process, minimizing exposure to oxygen. The stainless steel tank is additionally complete with 2 valves D25mm and D20mm and an added washing head. Dimensions: ø78 cm + 20 cm valve; height 169cm, 220V motor 0.18 kW; Stainless steel mixing spoon as measuring stick, Check hatch with button. Mixer 14rpm or 28rpm (specify when ordering)..

Stainless pressure tank for 3bar pressure with cooling jacket. Conical base 60° with 50mm insulation. Size: 800L. In the set: washing head, overpressure valve adjustable up to 3bar, thermometer. Accessories: level sensor, adjustable feet, sampling valve. valves DN40 or DN50..The size of the tank can vary up to max. +/-10%