Brewferm Keg Charger + CO2 cartridge

Made of high-quality stainless steel, the new pressure tank has a handy weight and size. The container is easy to fill-empty and clean... thanks to the large opening on the top of the container. The surface of the stainless tank is protected by a rubber lower protection ring and a metal handle. Technical data: size- 9.45L / Dimensions: height 370mm / diameter 232mm / Weight: 3.4kg / pressure relief valve 5bar, tank pressure tolerance up to 8bar..

CO2 mini-balloons 10pcs 16g, thread E290 for KEG holder (accessory) Dimensions: diagonal 22mm and height 89mm

18.9L KEG pressure tank ball-lock quick coupling with 1/4 thread..

The new pressure tank (beer tank) made of high-quality stainless steel has a handy weight and size. The container is easy to fill-empty and clean... thanks to the large opening on the top of the container. The surface of the stainless tank is protected by a rubber lower protection ring and a metal handle. Technical data: size-18.9L / Dimensions: height 555mm / diameter 232mm / Weight: 3.35kg / pressure relief valve 5bar. In addition to the pressure tank, it is necessary to purchase an outlet valve kit. With this kit, you can naturally release cider under pressure. If you need CO2, the following are added: Variant 1: Mini-balloon set Connecting joint Cylinders Variant 2: Connecting joint 2 pcs..

Cover set includes. lid, seal, pressure relay. The product has been used and restored..

.

The set includes an outlet valve, a 100cm hose, 2 clamps and a ball-lock quick connector for the KEG tank..

18.9L KEG pressure tank ball-lock quick coupling with 1/4 thread..

18.9L KEG pressure tank ball-lock nozzle..

18.9L KEG pressure tank ball-lock quick connector with 1/4 thread for liquid discharge.

19L pressure tank lid gasket - only the gasket with a diameter of 95mm from the middle of the gasket.

18.9L KEG pressure tank ball-lock liquid discharge nozzle..

18.9L Pressure Tank Quick Connect Nozzle O-Seal..

Reducer hose connection for a hose with an inner diameter of 4mm..

8L pressure tank ball-lock connection fittings set with pressure relief valve

Single-stage CO2 cylinder regulator-regulator with variable output pressure control. Allows the gases leaving the cylinder to be depressurized to the required level/pressure and ensures that the pressure is kept as constant as possible at the outlet... regardless of the change in inlet pressure. The regulator is equipped with a safety valve through which excess gas released from the exhaust pressure chamber exits. One monometer indicates the level of compressed air in the CO2 cylinder and the other in the output piping. For example, if you want to pressurize your tank with 3bar, the manometer must be in the position 10l/min, and for 2bar, 7l/min. Bar / l/min unit conversion table included. Technical data: input pressure 185bar, output pressure 0.5-10bar, output capacity 15m3/h, input thread W21.8x1 1 14, output nut thread G1/4 and pipe connection 6.3mm. 

Reducer hose connection for a hose with an inner diameter of 4mm..

With Nukatap "Flow Control" you have full control over the flow rate of your beer. Thanks to the simple but practical flow adjustment knob on the side, you control the foam generation at all times. This Nukatap is very suitable for use with the Kegerator Series X device. The revolutionary design reduces the foam effect of the first pour; this ensures that, unlike other taps, the first beer does not foam excessively due to the heat of the mixer. In addition, Nukatap has innovative seamless seals that prevent the faucet from dripping and bacteria from entering..

Regulator-reducer for two different output CO2 cylinders with variable output pressure regulation. Enables lowering the pressure of the gases leaving the cylinder to the required working level pressure and ensures that the pressure is kept automatically and as constant as possible - regardless of changes in the inlet pressure. The regulator is equipped with a safety valve. One monometer indicates the level of compressed air in the CO2 cylinder and the other in the output piping. The pressures of the output pipelines are separately adjustable. Technical data: input thread W21.8x1 1 14 (connection to cylinder). Buy more hose connectors if necessary..

Single-stage cylinder reducer with a rated inlet pressure of 200 bar and outlet pressure regulation. It allows you to reduce the pressure of gases taken from the cylinder to the required outlet (working) pressure and ensures that this pressure is automatically maintained at a possibly constant level, regardless of changes in the inlet pressure.