Blue indicator VINOFERM 100 ml ENDE

For measuring the pH of solution, wine, beer, kombucha. Set of 20 test strips with a built-in color chart! Measuring range 1-12pH, accuracy 1.0 pH.

How to use: Remove the black protective cap, turn on the device using the upper switch, insert the measuring tip into the liquid and wait for the measurement to stabilize. Clean the electrode with water and install the protective cap (do not use distilled or deionized water). To calibrate: immerse the tester in the 6.86 pH solution and use a screwdriver to turn the screw on the back of the pH meter until you read 6.9. The pH meter is now ready for use..

pH calibration solutions: pH 7.01 + pH 4.01. Regular calibration of electronic pH meters. 2 types of solutions: pH 4.01 and pH 7.01. Bottle content: 100mm.

Blue indicator for acidity meter Vinoferm®. Quality indicator! What is pH? pH is a measurement of the concentration of free hydrogen ions in a liquid. The pH of pure water is 7. Liquids with a higher concentration of hydrogen ions than water are acids and the pH value is less than 7. Liquids with a lower concentration of hydrogen ions are more alkaline and the pH value is greater than 7. The calculated pH value is 1-14..

PH meter anode storage fluid. The pH meter is a precision instrument. Correct use and proper maintenance are essential to enjoying your pH meter for a long time. Here are some important facts: When you buy an electrode, it is usually hydrated. First, let it soak in the storage solution for 4 hours. After each use, the sliding cap with the electrode must also be filled with its storage solution. This will keep your electrode working properly for much longer. Before the first measurement, the pH meter must be calibrated with buffer solutions. If the pH meter can only be calibrated at one point, use the buffer solution closest to your normal measurements. Be careful not to contaminate the buffer solution when calibrating. Therefore, never insert the electrode directly into the bottle, but measure it by pouring a small amount into a separate cup. After calibration, throw away the used cups, do not pour the liquid back into the bottle! Preferably, never touch the electrode, certainly not with your fingers. If you want to clean it, use only a soft cloth without rubbing the electrode..