Beverage Cooler & Beer Cooler Benchy Nitro, with Two Taps

Cleaning Keg 10L with Rubber Base, for Beer Lines The 10-liter stainless steel cleaning keg is the simplest way to clean beer lines and keg valves. The keg is equipped with a rubber base for stability. Features: 10-liter (2.64 gallon) capacity, made of high-quality stainless steel, includes rubber base for stability. Technical specifications: 1 x Type A tube with silicone suction tube, 1 x Type D tube with silicone suction tube, 1 x Cornelius type lid with 100psi pressure relief valve. Usage: Fill the cleaning keg with a mixture of StellarClean cleaner and warm water. Connect your beer tap valve similar to a regular keg and open the tap. We recommend letting the cleaning solution sit in the lines for at least 5 minutes, then rinse with warm water. For complete cleaning of lines and stainless steel taps, Stellarsan sanitizer can also be used at a ratio of 1.5 ml per 1 liter of water. Our 10L cleaning keg is fully passivated stainless steel, just like our new 19L kegs. Attention: DO NOT USE BLEACH OR CHLORINATED TSP (PINK POWDER) TO CLEAN KEGLAND STAINLESS STEEL PRODUCTS. TSP pink cleaner contains bleach which damages the stainless steel structure and causes corrosion. Suitable cleaners in proper dilution: StellarOxy, StellarClean, StellarSoda, StellarSan. The cleaning keg allows you to regularly and effectively maintain your beer system, ensuring fresh and clean beer taste always. The cleaning keg is a compact, durable, and reusable solution suitable for both home brewers and smaller bars.

Professional KeyKeg Beer Cooler With Compressor. Efficient compressor cooling system specifically designed for KeyKeg beer kegs, ensuring optimal working pressure of 2.8-3.2 bar. Technical Specifications: Quick setup time: 2-4 minutes. Adjustable temperature: +2°C to +10°C. Cooling capacity: 30 liters per hour. Cooling tube length: 13.5 meters. Equipped with 1 output tap. Device Dimensions: Width: 170 mm. Length: 280 mm. Height: 325 mm. Weight: 13 kg. Connections and Power Consumption: Hose connections: John Guest 3/8. Power: 267W. Electrical connection: 230V/50Hz/1.16A. Required accessories for installation: Connection fittings for tube and container. CO2 cylinder with pressure 2.5-2.9 bar when using metal kegs.

Beer Cooler Compact - Efficient Cooling System for Bars and Events Professional beer cooler ensures quick and efficient beverage cooling. The device is ready for use in just 2-4 minutes after connecting to power. Technical Features: Cooling efficiency: 30 liters per hour Temperature range: +2 to +10°C Cooling tube length: 13.5 meters Equipped with one output tap Device Specifications: Dimensions: 170 x 280 x 325 mm Weight: 13 kg Power consumption: 267W Power supply: 230V/50Hz/1.16A Connections and Installation: John Guest 3/8" connection hoses CO2 cylinder working pressure: 2.5-2.9 bar Tube and tank fittings need to be purchased separately This compact and powerful cooling device is ideal for bars, restaurants, and events where optimal beverage serving temperature needs to be maintained.

Professional KeyKeg Compressor Cooler - For Precise Beer Dispensing The efficient compressor cooler ensures optimal working pressure for KeyKeg barrels between 2.8-3.2 bar. The device reaches full operational capacity in just 5-8 minutes after connecting to power. Technical Features: Adjustable temperature range: +2°C to +10°C Cooling capacity: 35-40 liters per hour (maximum 50 l/h) Equipped with two output taps Total cooling pipeline length: 14 meters John Guest 5/8 connection hoses Device Specifications: Dimensions: 210 x 331 x 465 mm (L x W x H) Weight: 29.3 kg Power consumption: 1100W Power supply: 230V/50Hz/1.16A When using metal kegs, it is recommended to set the CO₂ cylinder working pressure between 2.5-2.9 bar. Note: pipe and container fittings must be purchased separately for cooler operation.

Professional Dual-Tap Beer Cooler with Integrated Lighting. Discover our top-tier dual-tap beer cooler that combines modern design with functionality. The cooler is equipped with built-in ambient lighting that adds elegance to your beverage system. Technical Features and Capability: Specially designed for Keykeg systems (2.8-3.2 bar). Quick startup: 2-4 minutes. Adjustable temperature: +2°C to +10°C. Cooling capacity: 30 liters per hour. Technical Specifications: Cooling line length: 13.5 meters. Dimensions: 185 x 300 x 345 mm. Weight: 16.5 kg. Power consumption: 267W (230V/50Hz/1.16A). Connections: John Guest 3/8. Tube and tank fittings need to be purchased separately for installation. When using metal kegs, the recommended CO2 cylinder pressure is 2.5-2.9 bar. This compressor cooler ensures optimal temperature and serving quality for your beverages, making it an ideal choice for both professional and home use.

Professional Beverage Cooler - Fast and Efficient Cooling System. Compressor-free beverage cooler ensures quick and reliable drink cooling. The device is designed for professional use in bars, restaurants, and events. Technical features: Ready to use: 5-8 minutes after connecting to power. Temperature range: +2°C to +10°C. Cooling capacity: 35-40 l/h (maximum 50 l/h). Equipped with 2 output taps. Cooling tube length: 14 meters. Device specifications: Dimensions: 225 x 330 x 425 mm. Weight: 26 kg. Power consumption: 1100W/230V/50Hz/1.16A. Connection hoses: John Guest 5/8. CO2 working pressure: 2.5-2.9 bar. NB! Tube and tank connectors must be purchased separately for cooler use.

KeyKeg Compressor Cooler for Professional Beverage Cooling. Powerful compressor cooler ensures optimal working pressure for KeyKegs between 2.8-3.2 bar. The device starts up quickly and is ready to use in just 2-4 minutes after connecting to power. Technical Features: Temperature control range: +2°C to +10°C, Cooling capacity: 25 liters per hour, Cooling tube length: 10.5 meters, Equipped with one output tap, John Guest 3/8 connection hoses. Device Specifications: Dimensions: 185 x 315 x 325 mm, Weight: 16.5 kg, Electrical connection: 230V/50Hz/1.16A. When using metal kegs, the recommended CO2 cylinder pressure is 2.5-2.9 bar. For full functionality, tube and container fittings must be purchased separately. Note! Tube and container fittings are not included with the product - these must be purchased separately.

Professional Beverage Cooling System for Commercial Use This powerful beverage cooling device is an ideal solution for breweries, presentation events, and receptions. Thanks to its two output taps and efficient cooling system, the device ensures consistent quality. Technical Features: Cooling capacity: 40-50 liters per hour (80-100 drinks) Silent compressor with adjustable pressure 1-3.6 bar Quick startup: 5-8 minutes Temperature range: +10°C 2 output taps Cooling tubes: 2 x 15 meters Device Specifications: Dimensions: 400 x 430 x 270 + 475 mm Weight: 33.5 kg Power consumption: 437W/230V/50Hz/1.16A Connection hoses: John Guest 5/8 When using metal kegs, the recommended CO2 cylinder pressure is 2.5-2.9 bar. Tube and container fittings need to be purchased separately to ensure full functionality.

SOUDEK 20 Luxury Beer Cooler - High-Quality Oak Wood Beverage Cooling System SOUDEK 20 beer cooler is a professional solution for serving beer and wine both at home and in commercial settings. The device is made of high-quality stainless steel and covered with elegant oak wood. Technical specifications: Cooling capacity: 20-40 liters per hour. Adjustable thermostat for precise temperature control. CO2 pressure for metal kegs: 2.5-2.9 bar. Main advantages: Compact dimensions for easier handling. High-quality oak wood exterior finish. Stainless steel components. Safe and easy to use. SOUDEK 20 combines modern cooling system with classic design, fitting perfectly in both home environments and bars. The thermostat maintains drinks at ideal serving temperature, ensuring the best taste experience.

Beverage cooler & carbonator Benchy 3.2L without taps, 240V. Benchy Sparkling - countertop/undercounter carbonator/cooler is the simplest way to install a sparkling water system. No ice needed, just connect the device to power, fill with glycol, connect water supply and immediately enjoy carbonated water. Benchy Sparkling is a solution that provides instantly chilled and carbonated water as needed. Simply connect the water supply and CO2 cylinder to the device and get unlimited sparkling and chilled water from the tap. Our Benchy product series is far superior to other market devices in terms of price, ease of use, and flexibility. Using the regulator, you can adjust the carbonation level to your taste, which cannot be done with other similar systems on the market. This device is also significantly more affordable and easier to install. To operate, simply: 1. Connect to power 2. Fill the internal water tank 3. Connect water supply 4. Connect CO2 cylinder 5. Dispense chilled sparkling water. It's that simple, and you can enjoy chilled sparkling water in less than an hour after installation, with rapid cooling. Ensure the device is installed and used according to the user manual found under additional information. Fully adjustable - Benchy Sparkling has an integrated digital temperature controller allowing temperature control from 0.5°C to 10°C. You can also adjust carbonation levels from 0.5 volumes to over 5 volumes for extra sparkling water. Cooling capacity - Benchy Sparkling can cool approximately 20-30 liters of sparkling water per hour (assuming ambient water and air temperature of 20°C). To increase device capacity, you can pre-cool mains water using either a refrigerated container (keg) or G40 cooler. Pre-cooling mains water can more than double Benchy Sparkling output. Technical specifications: Height: 465 mm Width: 290 mm Depth: 520 mm (excluding sight glass which can be removed) Refrigerant: r600a - (80 grams) Cooling power: 600 watts Power consumption: 155 W (standby power consumption less than 5 watts) Capacity: approximately 25 L per hour (assuming 20°C ambient temperature) Gas input: CO2 @ 2-3.5 bar (8 mm (5/16) OD tube) Water input: Must be 1 bar (15 psi) higher than gas pressure (6.35 mm (1/4") OD tube) Sparkling/chilled water output: 8 mm (5/16") OD tube. NOTE: Nukatap FC taps are sold separately for countertop installation.

Beer Cooler Grand Deluxe 3 with two glass doors, stainless steel Our Grand Deluxe 3 models are made and built for durability in commercial environments but are also perfect for home bars or small cafes. This two-door model accommodates the largest combination of kegs. Fits 12 x 19L Cornelius Ball Lock kegs OR 3 x 50L DIN-type kegs or both combined as desired. Taps sold separately. If your location lacks a forklift, you may need tailgate service as the Grand Deluxe is quite heavy and courier companies may have difficulty unloading it. If you need this service, please email or call us. Recent Grand Deluxe 3 updates: Durable Dixell temperature controller. We previously had issues with Carel temperature controllers, so we've upgraded to reliable Dixell controllers. R290 refrigerant. It's more electrically efficient, environmentally friendly, and provides better cooling capacity. Embraco compressor - 220V Features: 304 stainless steel worktops with thick foam layer helping reduce temperature loss from the cooler. Full stainless steel finish on sides and back. Double-glazed tempered safety glass with self-closing lockable doors as standard (6 keys). External LED lighting switch. Built-in recessed stainless steel drip tray with installed drain pipes. One tap mounting hole pre-installed. 2 rubber-coated steel wire shelves for bottles and cans. 4 heavy-duty castor mounts (not installed). Climate class 4. Dimensions: External dimensions: 1495mm (L) x 705mm (W) x 910mm (H) [without 100mm castors] Internal dimensions: 1160mm (L) x 550mm (W) x 780mm (H) Please note: 1. All professional-grade equipment requires calibration during setup and periodic maintenance. This ensures your system works correctly before being left unattended. This typically involves Grand Deluxe 3 defrost cycles and temperature calibration. As we don't know where and under what conditions the unit will be installed, default settings may not always suit your usage. 2. This is a professional-grade unit with high cooling capacity. The powerful fans in this unit are louder than smaller Series X and Series 4 beer coolers. 3. These professional-grade coolers are hand-built and may contain some minor cosmetic scratches or dents. 4. We prefer customers to collect these from our distribution center as they are quite large and can be challenging to transport. If you opt for us to arrange transport, please note they may arrive with some cosmetic marks/scratches/dents from handling, but we guarantee the cooler's cooling capacity. 5. Any cooler dispensing liquid should not be stored on surfaces that can be damaged. Accidents happen and condensation can drip if the unit is loaded beyond its capabilities. Climate Class 4 - Recommended for indoor use where temperature doesn't exceed 30°C and relative humidity 55%. If using outdoors, remember the unit will run longer and seasonal defrosting will vary depending on temperature/humidity levels. These units don't have heated doors, if area exceeds 55% relative humidity, frost/increased condensation will form on doors. Operating principle: The Grand Deluxe 3 beer cooler is designed for cooling and maintaining beer kegs at optimal temperature. The unit enables storage of serving-ready beer and dispensing through taps, ensuring professional beer serving capability.

Beer Chiller Grand Deluxe 3 with three glass doors, stainless steel Our Grand Deluxe 3 models are made from durable material for commercial environments, ideal for use in man caves or small bars/cafes. This three-door model accommodates the largest combination of kegs: 20 x 19L Cornelius Ball Lock kegs OR 5 x 50L DIN type kegs or their combination as desired. Taps and spouts sold separately. Recent Grand Deluxe 3 updates: Durable Dixell temperature controller. We previously had issues with Carel temperature controllers, so we've switched to more reliable Dixell temperature controllers. Air flow cover extension. This helps improve airflow and ensures more consistent temperatures. r290 refrigerant. This is more electrically efficient, environmentally friendly, and provides better cooling capacity. Embraco compressor - 220V Features: 304 stainless steel work surfaces with thick foam core to help prevent refrigerator temperature loss. Full stainless steel finish on sides and back. Double tempered safety glass self-closing and lockable doors as standard (6 x keys). External LED lighting switches. Built-in recessed stainless steel drip tray with drainage system. Two tap mounting holes are pre-installed. 4 x rubber-coated steel wire shelves for promotional bottles and cans. 6 x reinforced castors (not installed). Dimensions: External dimensions: 2300mm (L) x 710mm (W) x 910mm (H) [without 100mm castors] Internal dimensions: 1970mm (L) x 550mm (W) x 780mm (H) Distance between tap hole centers: 714mm Shipping: After completing the purchase process, click the "Request Quote" button to send us a shipping quote request. We will manually prepare a shipping quote for the item, as the website's standard courier rates for boxes may be too high for an item of this size (this product is on a pallet). Please note: 1. All professional-level equipment requires calibration during setup and periodic maintenance. This is necessary to ensure proper system operation before leaving it unattended. This typically involves Grand Deluxe 3 defrost cycles and temperature calibration. As KegLand doesn't know where the equipment will be installed and under what conditions it will be used, default settings may not always suit your intended use. 2. This is a professional-grade device with high-level cooling capacity. This unit's powerful fans are louder than those of smaller Series X and Series 4 beer chillers. 3. These professional-grade fridges are hand-made and may have minor cosmetic scratches or dents. 4. We prefer customers to collect these from our distribution center as they are quite large and shipping can be complicated. If you decide to have us arrange shipping, please note they may arrive with some cosmetic marks/scratches/dents from handling, but we guarantee the fridge's cooling capacity. 5. Any fridge dispensing liquid should not be stored on a surface that can be damaged. Accidents happen and condensation can drip if the unit's capacity limits are exceeded. Climate Class 4 - recommended for indoor use in areas where temperature doesn't exceed 30°C and relative humidity 55%. If using outdoors, note that the unit will run much longer and seasonal defrosting will vary according to temperature/humidity levels. These units don't have heated doors, if area exceeds 55% relative humidity, frost/increased condensation will form on doors. The beer chiller allows drinks to be kept at optimal temperature, maintaining their freshness and taste. It's an ideal unit for bars, restaurants, or home brew enthusiasts who want to serve their beverages professionally.

Professional Dual-Tap Beer Cooler with Integrated Lighting. Discover our top-tier dual-tap beer cooler that combines modern design with functionality. The cooler is equipped with built-in ambient lighting that adds elegance to your beverage system. Technical Features and Capability: Specially designed for Keykeg systems (2.8-3.2 bar). Quick startup: 2-4 minutes. Adjustable temperature: +2°C to +10°C. Cooling capacity: 30 liters per hour. Technical Specifications: Cooling line length: 13.5 meters. Dimensions: 185 x 300 x 345 mm. Weight: 16.5 kg. Power consumption: 267W (230V/50Hz/1.16A). Connections: John Guest 3/8. Tube and tank fittings need to be purchased separately for installation. When using metal kegs, the recommended CO2 cylinder pressure is 2.5-2.9 bar. This compressor cooler ensures optimal temperature and serving quality for your beverages, making it an ideal choice for both professional and home use.

SOUDEK 50 Professional Oak Wood Beer Cooler - Three-Tap Cooling System SOUDEK 50 is a high-end beer and wine cooler, perfect for both home use and bars. This premium device allows simultaneous cooling and serving of up to three different beverages. Powerful Cooling System Cooling capacity: 40-50 liters per hour Number of servings: 80-100 glasses per hour Temperature control with thermostat Luxurious Design and Quality Hand-crafted oak wood casing Stainless steel components Compact and elegant appearance Three serving taps Technical Features CO2 system with 2.5-2.9 bar pressure Built-in thermostat for precise temperature control Compact size for easy installation Professional cooling system The SOUDEK 50 beer cooler is an ideal choice for those who want to serve perfectly chilled drinks at a professional level. The device's modern technology and quality finish ensure long-term reliability and aesthetic appearance.

Professional Beverage Cooling System for Commercial Use This powerful beverage cooling device is an ideal solution for breweries, presentation events, and receptions. Thanks to its two output taps and efficient cooling system, the device ensures consistent quality. Technical Features: Cooling capacity: 40-50 liters per hour (80-100 drinks) Silent compressor with adjustable pressure 1-3.6 bar Quick startup: 5-8 minutes Temperature range: +10°C 2 output taps Cooling tubes: 2 x 15 meters Device Specifications: Dimensions: 400 x 430 x 270 + 475 mm Weight: 33.5 kg Power consumption: 437W/230V/50Hz/1.16A Connection hoses: John Guest 5/8 When using metal kegs, the recommended CO2 cylinder pressure is 2.5-2.9 bar. Tube and container fittings need to be purchased separately to ensure full functionality.

3-Tap Beer Tower for Kegerator Series X - Professional Dispensing Kit High-quality 3-tap beer tower kit specifically designed for Kegerator Series X beer cooler. Brushed stainless steel tower ensures long service life and elegant appearance. Complete kit contents: Stainless steel tower for three outputs (without taps), 3 Duotight-compatible short tubes, 3 black plastic tap handles, EVABarrier beer line (3x8mm) and gas line (5x8mm), 3 Duotight push-in fittings (6.5x8mm), 4 M5 stainless steel mounting screws. EVABarrier tubes and Duotight quick connectors allow for easy installation and ensure leak-proof connection. The tower kit securely attaches to the beer cooler with included stainless steel screws. Professional solution for bars, restaurants, and home beer serving. Fully compatible with Kegerator Series X model, allowing simultaneous serving of three different beverages.

Beverage cooler & carbonator Benchy 3.2L without taps, 240V. Benchy Sparkling - countertop/undercounter carbonator/cooler is the simplest way to install a sparkling water system. No ice needed, just connect the device to power, fill with glycol, connect water supply and immediately enjoy carbonated water. Benchy Sparkling is a solution that provides instantly chilled and carbonated water as needed. Simply connect the water supply and CO2 cylinder to the device and get unlimited sparkling and chilled water from the tap. Our Benchy product series is far superior to other market devices in terms of price, ease of use, and flexibility. Using the regulator, you can adjust the carbonation level to your taste, which cannot be done with other similar systems on the market. This device is also significantly more affordable and easier to install. To operate, simply: 1. Connect to power 2. Fill the internal water tank 3. Connect water supply 4. Connect CO2 cylinder 5. Dispense chilled sparkling water. It's that simple, and you can enjoy chilled sparkling water in less than an hour after installation, with rapid cooling. Ensure the device is installed and used according to the user manual found under additional information. Fully adjustable - Benchy Sparkling has an integrated digital temperature controller allowing temperature control from 0.5°C to 10°C. You can also adjust carbonation levels from 0.5 volumes to over 5 volumes for extra sparkling water. Cooling capacity - Benchy Sparkling can cool approximately 20-30 liters of sparkling water per hour (assuming ambient water and air temperature of 20°C). To increase device capacity, you can pre-cool mains water using either a refrigerated container (keg) or G40 cooler. Pre-cooling mains water can more than double Benchy Sparkling output. Technical specifications: Height: 465 mm Width: 290 mm Depth: 520 mm (excluding sight glass which can be removed) Refrigerant: r600a - (80 grams) Cooling power: 600 watts Power consumption: 155 W (standby power consumption less than 5 watts) Capacity: approximately 25 L per hour (assuming 20°C ambient temperature) Gas input: CO2 @ 2-3.5 bar (8 mm (5/16) OD tube) Water input: Must be 1 bar (15 psi) higher than gas pressure (6.35 mm (1/4") OD tube) Sparkling/chilled water output: 8 mm (5/16") OD tube. NOTE: Nukatap FC taps are sold separately for countertop installation.