Categories

Beverage chiller & carbonator Benchy 3.2L without taps, 240V

SKU: 1699
EAN: 20000000542399
Brand:
Unit: tk
Stock qty: On special order

Price:
790,00 €
Qty.: - +
   - or -   

Beverage cooler & carbonator Benchy 3.2L without taps, 240V

Benchy Sparkling - countertop/undercounter carbonator/cooler is the simplest way to install a sparkling water system. No ice needed, just connect the device to power, fill with glycol, connect water supply and immediately enjoy carbonated water.

Benchy Sparkling is a solution that provides instantly chilled and carbonated water as needed. Simply connect the water supply and CO2 cylinder to the device and get unlimited sparkling and chilled water from the tap.

Our Benchy product series is far superior to other market devices in terms of price, ease of use, and flexibility. Using the regulator, you can adjust the carbonation level to your taste, which cannot be done with other similar systems on the market. This device is also significantly more affordable and easier to install.

To operate, simply:
1. Connect to power
2. Fill the internal water tank
3. Connect water supply
4. Connect CO2 cylinder
5. Dispense chilled sparkling water

It's that simple, and you can enjoy chilled sparkling water in less than an hour after installation, with rapid cooling.

Ensure the device is installed and used according to the user manual found under additional information.

Fully adjustable - Benchy Sparkling has an integrated digital temperature controller allowing temperature control from 0.5°C to 10°C. You can also adjust carbonation levels from 0.5 volumes to over 5 volumes for extra sparkling water.

Cooling capacity - Benchy Sparkling can cool approximately 20-30 liters of sparkling water per hour (assuming ambient water and air temperature of 20°C). To increase device capacity, you can pre-cool mains water using either a refrigerated container (keg) or G40 cooler. Pre-cooling mains water can more than double Benchy Sparkling output.

Technical specifications:
Height: 465 mm
Width: 290 mm
Depth: 520 mm (excluding sight glass which can be removed)
Refrigerant: r600a - (80 grams)
Cooling power: 600 watts
Power consumption: 155 W (standby power consumption less than 5 watts)
Capacity: approximately 25 L per hour (assuming 20°C ambient temperature)
Gas input: CO2 @ 2-3.5 bar (8 mm (5/16) OD tube)
Water input: Must be 1 bar (15 psi) higher than gas pressure (6.35 mm (1/4") OD tube)
Sparkling/chilled water output: 8 mm (5/16") OD tube

NOTE: Nukatap FC taps are sold separately for countertop installation.

General operating principle: The device cools and carbonates tap water, creating delicious sparkling water without the need to buy or carry bottles. Suitable for both home and small business use, providing freshly carbonated water as needed.

Weight (kg) 0.000000
High (m) 0.52
Width (m) 0.29
Length (m) 0.465
Matching products
10L Cleaning Container with rubber base, for beer lines
Cleaning Keg 10L with Rubber Base, for Beer Lines The 10-liter stainless steel cleaning keg is the simplest way to clean beer lines and keg valves. The keg is equipped with a rubber base for stability. Features: 10-liter (2.64 gallon) capacity, made of high-quality stainless steel, includes rubber base for stability. Technical specifications: 1 x Type A tube with silicone suction tube, 1 x Type D tube with silicone suction tube, 1 x Cornelius type lid with 100psi pressure relief valve. Usage: Fill the cleaning keg with a mixture of StellarClean cleaner and warm water. Connect your beer tap valve similar to a regular keg and open the tap. We recommend letting the cleaning solution sit in the lines for at least 5 minutes, then rinse with warm water. For complete cleaning of lines and stainless steel taps, Stellarsan sanitizer can also be used at a ratio of 1.5 ml per 1 liter of water. Our 10L cleaning keg is fully passivated stainless steel, just like our new 19L kegs. Attention: DO NOT USE BLEACH OR CHLORINATED TSP (PINK POWDER) TO CLEAN KEGLAND STAINLESS STEEL PRODUCTS. TSP pink cleaner contains bleach which damages the stainless steel structure and causes corrosion. Suitable cleaners in proper dilution: StellarOxy, StellarClean, StellarSoda, StellarSan. The cleaning keg allows you to regularly and effectively maintain your beer system, ensuring fresh and clean beer taste always. The cleaning keg is a compact, durable, and reusable solution suitable for both home brewers and smaller bars.
SKU: 1704 ,   EAN: 20000000542443 ,   Stock qty: On special order
195,00 €
Stock qty: On special order
Similar products
Beverage Cooler & Beer Cooler Pygmy 25
Beer Cooler Compact - Efficient Cooling System for Bars and Events Professional beer cooler ensures quick and efficient beverage cooling. The device is ready for use in just 2-4 minutes after connecting to power. Technical Features: Cooling efficiency: 30 liters per hour Temperature range: +2 to +10°C Cooling tube length: 13.5 meters Equipped with one output tap Device Specifications: Dimensions: 170 x 280 x 325 mm Weight: 13 kg Power consumption: 267W Power supply: 230V/50Hz/1.16A Connections and Installation: John Guest 3/8" connection hoses CO2 cylinder working pressure: 2.5-2.9 bar Tube and tank fittings need to be purchased separately This compact and powerful cooling device is ideal for bars, restaurants, and events where optimal beverage serving temperature needs to be maintained.
SKU: 9001325 ,   EAN: 2000000024622 ,   Stock qty: 1 ,   Pakend: ,   Hulgipakend:
549,00 €
Stock qty: 1
Beverage Cooler & Beer Cooler Pygmy 40/K
Professional KeyKeg Compressor Cooler - For Precise Beer Dispensing The efficient compressor cooler ensures optimal working pressure for KeyKeg barrels between 2.8-3.2 bar. The device reaches full operational capacity in just 5-8 minutes after connecting to power. Technical Features: Adjustable temperature range: +2°C to +10°C Cooling capacity: 35-40 liters per hour (maximum 50 l/h) Equipped with two output taps Total cooling pipeline length: 14 meters John Guest 5/8 connection hoses Device Specifications: Dimensions: 210 x 331 x 465 mm (L x W x H) Weight: 29.3 kg Power consumption: 1100W Power supply: 230V/50Hz/1.16A When using metal kegs, it is recommended to set the CO₂ cylinder working pressure between 2.5-2.9 bar. Note: pipe and container fittings must be purchased separately for cooler operation.
SKU: 9001353 ,   EAN: 5420069801809 ,   Stock qty: 2 ,   Pakend: ,   Hulgipakend: ,   Kuumale +95C:
975,00 € (11%)
1095,00 €
Stock qty: 2
Beverage Cooler & Beer Cooler Soudek 3, 50 L
SOUDEK 50 Professional Oak Wood Beer Cooler - Three-Tap Cooling System SOUDEK 50 is a high-end beer and wine cooler, perfect for both home use and bars. This premium device allows simultaneous cooling and serving of up to three different beverages. Powerful Cooling System Cooling capacity: 40-50 liters per hour Number of servings: 80-100 glasses per hour Temperature control with thermostat Luxurious Design and Quality Hand-crafted oak wood casing Stainless steel components Compact and elegant appearance Three serving taps Technical Features CO2 system with 2.5-2.9 bar pressure Built-in thermostat for precise temperature control Compact size for easy installation Professional cooling system The SOUDEK 50 beer cooler is an ideal choice for those who want to serve perfectly chilled drinks at a professional level. The device's modern technology and quality finish ensure long-term reliability and aesthetic appearance.
SKU: 35727 ,   EAN: 2000000035727 ,   Stock qty: On special order ,   Delivery time: Eritellimustoode / Please contact / Ota yhteyttä
1591,00 €
Stock qty: On special order
Coolung unit CW COMPACT Green Line
SODA CW COMPACT Water Machine - Professional Carbonated Water Producer SODA CW COMPACT is a perfect solution for producing chilled and carbonated water, ideal for offices, production facilities, and homes. The device produces up to 25 liters of quality carbonated water per hour. Technical Specifications: Production capacity: 20-25 liters per hour, Cooling capacity: 310W, Compressor power: 1/8 HP, Power consumption: 460W/2A, Cooling coil length: 11m, Weight: 21kg, Power supply: 220-240V 50Hz~1. Environmentally Friendly Technology: GREEN LINE technology uses environmentally friendly refrigerant R-290, ensuring 20% greater energy efficiency and lower power consumption. Quality Construction: Fully stainless steel housing and coil, Meets highest hygiene standards, Adjustable temperature regulator with 7 settings, Stainless steel drip tray, Quality dispensing valve for easy use, CO2 connection for threaded bottles (Tr 21x4), Beverage connection: 5/16. LINDR cooling system ensures efficient operation and long-term durability, exceeding electrical input power indicators.
SKU: 48161 ,   EAN: 2000000048161 ,   Stock qty: On special order ,   Delivery time: Eritellimustoode / Please contact / Ota yhteyttä ,   Pakend: ,   Hulgipakend:
1596,00 €
Stock qty: On special order
Carbonisator, cooler Soda AS-45 25l/h
SODA PYGMY - Compact Carbonated Water Maker SODA PYGMY is a capable carbonated water maker that produces up to 25 liters of perfectly chilled sparkling or still water per hour. The unit is equipped with a precise thermostat for temperature control and two dispensing taps. Environmentally Friendly Technology GREEN LINE technology uses environmentally friendly refrigerant R-290. Energy-efficient design ensures 20% greater energy efficiency and lower power consumption. Quality Construction The unit's body and coil are made of durable stainless steel that meets the highest hygiene standards. The stainless steel drip tray makes the device convenient and hygienic to use. Technical Specifications Compressor cooling capacity: 310W (1/8 HP). Maximum cooling: 25 L/hour. Continuous cooling: 20 L/hour. Carbonated water output: 20-25 L/hour. Cooling tube length: 11.0 m. Power: 391W. Current: 1.70A. Weight: 19.0 kg. Connections Power supply: 220-240V 50Hz. Beverage connection: G 3/8. CO2 connection: 5/16.
SKU: 49205 ,   EAN: 2000000049205 ,   Stock qty: On special order ,   Delivery time: Eritellimustoode / Please contact / Ota yhteyttä
1489,00 €
Stock qty: On special order
Carbonisator, cooler Soda PYGMY 25
SODA PYGMY 25 GREEN LINE - Professional Carbonated Water Maker SODA PYGMY 25 GREEN LINE is an efficient and environmentally friendly carbonated water maker that produces chilled soda water by mixing H2O and CO2. The device is ideal for under-counter installation and connection to a bar tower or external tap. Main advantages: Productivity: up to 25 liters of perfectly chilled soda water per hour Modern design and easy maintenance Ergonomic handles for safe handling Precise temperature control with thermostat Eco-friendly technology: GREEN LINE technology uses environmentally friendly refrigerant R-290 and an innovative energy-saving system. The result is 20% greater energy efficiency and lower energy consumption. Technical specifications: Compressor power: 1/8 HP Cooling capacity: 310W Continuous cooling: 20 L/hour Carbonated water output: 20-25 L/hour Cooling coil length: 10.5 m Power: 391W Weight: 17 kg Power supply: 220-240V 50Hz SODA PYGMY 25 GREEN LINE is perfectly suited for use in offices, restaurants, and manufacturing facilities, offering an optimal ratio of performance, quality, and dimensions.
SKU: 49212 ,   EAN: 2000000049212 ,   Stock qty: On special order ,   Delivery time: Eritellimustoode / Please contact / Ota yhteyttä
1495,00 €
Stock qty: On special order
Beverage & Beer Cooler Benchy Carbon with two taps, 12V/24V/240V
Benchy Carbon Beverage Cooler - Portable with Two Taps (12V/24V/240V) Benchy Carbon is an innovative portable beverage cooler equipped with two Nukatap FC stainless steel taps. The device operates on 12-24V DC power, making it ideal for camping and outdoor use. Revolutionary Carbon Cooling System The novel solid carbon-based cooling system requires no glycol or other liquids, ensuring safe transportation and easy use. The carbon cooling technology developed by KegLand offers excellent thermal efficiency in a compact form. Compact and Lightweight Design Weight: under 20 kg Dimensions: 233 mm x 400 mm Can be mounted on or under the table Power and Energy Efficiency Cooling capacity: 150W (8 liters per hour) Operating power consumption: 60W Average power consumption: 15W Standby mode: 1.6W Environmentally Friendly Technology The device uses r600a environmentally friendly refrigerant, ensuring low energy consumption and efficient cooling. Thanks to quick recovery time, the device is ready to use in 15 minutes. Versatile Power Options Works with the following power sources: 12V DC 24V DC 110-240V AC (with IEC cable) Technical Specifications Input voltage: 9.5-31V DC Cooling efficiency: 8L/h (at 20°C) Dimensions: 23.5 x 35 x 46 cm Note! Power cable with alligator clips must be purchased separately.
SKU: 1478 ,   EAN: 20000000540180 ,   Stock qty: On special order ,   Pakend: ,   Hulgipakend: ,   Kuumale +95C:
895,00 €
Stock qty: On special order
Beverage Cooler & Beer Cooler Benchy Nitro, with Two Taps
Beverage cooler & beer cooler Benchy Nitro, with two taps Unlike other nitro systems, this type of countertop nitro device extracts nitrogen from the air and mixes it with the beverage, meaning you don't need to buy nitrogen tanks. The system also cools the beverage, so all you need to do is fill the included container with your nitro cold brew coffee or cocktail mix and pour it directly through the tap. It's really that simple. Alternatively, if you want to pour nitro beer, don't use the included nitro container but use a keg instead. Fill your keg with nitrogen stout or other nitro beer. Then add a very small amount of gas pressure (maximum 1 or 2 psi) to the keg and connect the nitrogen outlet hose to the nitro dispenser. No more expensive tank rentals needed. Just plug in the device and turn it on. The machine cools down within 15 minutes and you can pour cold nitro stout with a creamy cascade effect. Features: No bulky nitrogen tank needed, two nitro taps for two product lines, slimmer design fits nicely on your counter, ready to use in minutes, draws beverages from any cold brew coffee container or keg, adjustable nitrogen gas levels, adjustable temperature control, minimal maintenance and upkeep requirements, easy to use, move and clean. Technical specifications: Power supply: 230V/50Hz, 10A IEC cable, stainless steel device, 12-month limited manufacturer warranty. Weight and dimensions: 475 mm (depth) x 205 mm (width) x 405 mm (height), 600 mm depth including taps, hose bends and drip tray, 515 mm height including tap handle height, weight: 42 kg. Benchy Nitro is an excellent solution for bars, cafes, and restaurants wanting to offer quality nitro cold beverages without the need for constant nitrogen tank replacements. The device is easy to use and maintain, ensuring consistent and creamy textured drinks.
SKU: 1691 ,   EAN: 20000000542313 ,   Stock qty: On special order
2890,00 €
Stock qty: On special order
Beverage Cooler & Beer Cooler SS Benchy - Glycol 240V
Beer Server SS Benchy - Glycol 240V SS Benchy portable beverage cooler is the simplest way to serve drinks that need cooling. No ice needed! Simply connect the keg and power supply, and you can immediately serve beer or other chilled beverages. Stainless steel Benchy with two taps glycol-cooled portable countertop serving device. Want a countertop beverage cooling system that simply plugs into power, is filled with a water and glycol mixture, and is easy to use? Benchy is a simple-to-use countertop server that makes pouring beer from a keg as easy as pressing a switch. Perfect for weddings, catering, or other events. It's simple: 1. Connect to power 2. Add 20% glycol/water solution 3. Connect kegs and gas 4. Wait up to 1 hour for the container to cool down 5. Dispense the beverage! Find detailed steps in the user manual. Dimensions: 530 L x 340 W x 470 H (mm) - With duotight visible fill level tube 600 L x 340 W x 470 H (mm) - With NukaTaps Glycol Tank - This model has an efficiently sized glycol tank that cools quickly and provides thermal mass to handle peak serving times. Cooling Capacity - The Benchy glycol unit can cool approximately 20-30L of beer per hour. This beer consumption rate is ideal for many bars/cafes and home use. Compact and Portable - Small enough to fit in a car trunk, lift by one person, and quickly install in any bar, cafe, outdoor entertainment, or events. The principle of using the Benchy server is simple - the device cools beer through a glycol system, allowing to serve perfectly chilled beer without the need for ice or other traditional cooling methods. The glycol system maintains a stable temperature and ensures that beer is always fresh and pleasantly cold.
SKU: 1692 ,   EAN: 20000000542320 ,   Stock qty: On special order
849,00 €
Stock qty: On special order
Similar products
Beer & Beverage Cooler Pygmy 25/K
Professional KeyKeg Beer Cooler With Compressor. Efficient compressor cooling system specifically designed for KeyKeg beer kegs, ensuring optimal working pressure of 2.8-3.2 bar. Technical Specifications: Quick setup time: 2-4 minutes. Adjustable temperature: +2°C to +10°C. Cooling capacity: 30 liters per hour. Cooling tube length: 13.5 meters. Equipped with 1 output tap. Device Dimensions: Width: 170 mm. Length: 280 mm. Height: 325 mm. Weight: 13 kg. Connections and Power Consumption: Hose connections: John Guest 3/8. Power: 267W. Electrical connection: 230V/50Hz/1.16A. Required accessories for installation: Connection fittings for tube and container. CO2 cylinder with pressure 2.5-2.9 bar when using metal kegs.
SKU: 9001324 ,   EAN: 2000000024615 ,   Stock qty: 2 ,   Pakend: ,   Hulgipakend: ,   Kuumale +95C:
675,00 € (15.1%)
795,00 €
Stock qty: 2
Beer & Beverage Cooler Pygmy 25/K Exclusive
Professional Dual-Tap Beer Cooler with Integrated Lighting. Discover our top-tier dual-tap beer cooler that combines modern design with functionality. The cooler is equipped with built-in ambient lighting that adds elegance to your beverage system. Technical Features and Capability: Specially designed for Keykeg systems (2.8-3.2 bar). Quick startup: 2-4 minutes. Adjustable temperature: +2°C to +10°C. Cooling capacity: 30 liters per hour. Technical Specifications: Cooling line length: 13.5 meters. Dimensions: 185 x 300 x 345 mm. Weight: 16.5 kg. Power consumption: 267W (230V/50Hz/1.16A). Connections: John Guest 3/8. Tube and tank fittings need to be purchased separately for installation. When using metal kegs, the recommended CO2 cylinder pressure is 2.5-2.9 bar. This compressor cooler ensures optimal temperature and serving quality for your beverages, making it an ideal choice for both professional and home use.
SKU: 9001354 ,   EAN: 2000000024912 ,   Stock qty: 1 ,   Pakend: ,   Hulgipakend: ,   Kuumale +95C:
990,00 € (9.6%)
1095,00 €
Stock qty: 1
Kegerator starter kit - basic
KegLand Series X Professional Beer Tap System - 3 Tap Kegerator Perfect beer serving station that accommodates up to four 19-liter kegs. Energy-efficient cooling system with thick insulated walls ensures optimal beer temperature. Main components: Kegerator cooling cabinet on wheels, MK4 KegLand regulator with 8mm precision fitting, 3 Nukatap stainless steel taps, Brushed stainless steel three-tap tower. Technical solutions: EVABarrier beer lines (4x8mm), EVABarrier gas lines (5x8mm), CO2 cylinder holder (fits 2.6kg cylinder), Black drip tray. Additional equipment: Chrome guard rail, Practical shelf, 3 black plastic handles, Mounting hardware and fittings. Note: Beer kegs and CO2 cylinder not included.
SKU: 35369 ,   EAN: 5420069844530 ,   Stock qty: On special order ,   Delivery time: Eritellimustoode / Please contact / Ota yhteyttä ,   Pakend: ,   Hulgipakend:
899,00 €
Stock qty: On special order
Beverage Cooler & Beer Cooler Soudek 3, 50 L
SOUDEK 50 Professional Oak Wood Beer Cooler - Three-Tap Cooling System SOUDEK 50 is a high-end beer and wine cooler, perfect for both home use and bars. This premium device allows simultaneous cooling and serving of up to three different beverages. Powerful Cooling System Cooling capacity: 40-50 liters per hour Number of servings: 80-100 glasses per hour Temperature control with thermostat Luxurious Design and Quality Hand-crafted oak wood casing Stainless steel components Compact and elegant appearance Three serving taps Technical Features CO2 system with 2.5-2.9 bar pressure Built-in thermostat for precise temperature control Compact size for easy installation Professional cooling system The SOUDEK 50 beer cooler is an ideal choice for those who want to serve perfectly chilled drinks at a professional level. The device's modern technology and quality finish ensure long-term reliability and aesthetic appearance.
SKU: 35727 ,   EAN: 2000000035727 ,   Stock qty: On special order ,   Delivery time: Eritellimustoode / Please contact / Ota yhteyttä
1591,00 €
Stock qty: On special order
Kegerator Series X.1, stainless steel
Beer Keg Cooling Unit X.1 Series, Stainless Steel This new beer keg cooling unit model is a major advancement compared to the older Series 4 model and Series X model. The new X.1 series has several important improvements: 1. 10% more energy efficient 2. 15% faster cooling and better cooling efficiency in warmer climates 3. Thicker walls for better insulation 4. FITS 4 CORNY KEGS (sold separately) 5. High-quality stainless steel top panel and side panels These quality beer keg cooling units come standard with 50 cm stainless steel drip trays that accommodate any tap configuration and fit even the widest installations. Base model includes: - 1 x MK4 KegLand regulator with 1 x 8mm duotight x FFL fitting - 1 x Perforated stainless steel countertop drip tray - 50 cm x 17 cm x 1.5 cm - 1 x Set of 4 casters + bolts (2 x lockable front, 2 swivel) - 1 x CO2 bottle holder (fits 2.6 kg gas bottle) - 1 x NEW! Carbonation scale sticker - NEW internal door-activated lighting Note: These items cannot be removed from the kit. The beer keg cooling unit is designed for home beer storage and serving. The unit keeps beer fresh and at the right temperature, allowing quality beer to be served directly from kegs through the tap. The cooling unit is equipped with a CO2 system that ensures beer is kept under proper pressure and maintains freshness.
SKU: 1706 ,   EAN: 20000000542467 ,   Stock qty: On special order
669,00 €
Stock qty: On special order

The heart of FERMETECH is experience and scientific approach – experience dating back to 2009, which we have continuously refined. Our slogan "The Power of Science, Perfect Results" reflects our commitment to applying the best knowledge to achieve top-level outcomes. We are trusted because our operations are guided by the principle – quality and scientific precision first, then price category. Thousands of solutions based on our technology across Estonia speak for themselves, testifying that we are always there for our customers both before and after purchase. Our specialists understand that fermentation processes require both scientific precision and practical experience. That's why we offer not just equipment, but comprehensive solutions based on knowledge accumulated over years. Science-based quality, technical support, and precision are not just words for us, but real principles that guide our daily work for the benefit of all clients. FERMETECH has the same big heart as before, but now enhanced with the power of science to support your perfect results. Discover how the power of science can help you achieve perfect results in your next project.