Adapter for swing-top bottles

Back pressure isobaric small bottler for hobby use. Productivity 80-90pdl/h. Made in Sweden! Dimensions of suitable bottles: height 175-310cm and bottle mouth 26mm. Extras (indicate immediately when ordering): Swing-top bottle bottling nozzle +25EUR Using the device: 1. Connect the bottler to the CO2 and bottle of the liquid to be bottled 2. Place the bottle under the device 3. Fill the bottle with CO2 by pressing the black "+" button 4. Press to the pressure release "-" button 5. Fill the bottle with CO2 by pressing the black "+" button 6. Points no. 3 and 4 should be repeated for min. 2x to ensure sufficient CO2 concentration in the bottle, but lastly, always press the "+" button before bottling 7. Open the liquid supply valve and close the container when it is full..

semi-automatic 3in1 device for the shampoo method disc corker-dispenser and liquid level control bottler. Made in Italy. Made of stainless steel. The device can be used to remove the pre-cooled cap from the bottle neck + foam removal with compressed air (manometer, compressed air valve) + bottle neck slot with liquid setting + manually controlled 3T valve with liquid dispenser. Productivity 150pd/h (0.75L) / bottles D 70-114mm and H 245-380mm / weight 75kg / size: 75x60x160 / compressed air 0.5/2bar.

Italian quality isobaric bottler with 4-bottle nozzle. Suitable for bottling various gaseous liquids such as beer, cider, sparkling wine, carbonated water, etc. Maximum bottling pressure 5bar. Foam reducing nozzles, Power consumption 0.37kw/220V, Compressed air consumption 120l/min/6bar, 24V; Dimensions h1.92m x 0.8m x 0.40m; Suitable bottles max. height 350mm and max. diameter 120mm. ADDITIONAL EQUIPMENT (at extra cost): Automatic bottling process; Pneumatic pump for pumping liquids into the bottle; Tare pre-cleaning with water and air or only with air; Capping device; Set of gaskets for 1" connection valve; Additional pipes, to ensure different bottling levels in the bottles; Bottle mock-ups, for cleaning the valves; Return valve. Additional equipment: compressed air dryer (definitely necessary to prevent rust in the nozzles), compressed air compressor, automatic bottling process with the push of a button..

Manual hand valve for bottling pre-pressurized liquids with 14-20mm opening and min. into bottles with a height of 220 cm. Fills the bottle without foam, quick filling. Easy to install... inner diameter of suitable pipe 5-6mm. In addition, you need a pressure tank, a CO2 cylinder, a reducer and connecting hoses with fittings (if necessary, we will complete a suitable set for you - contact us). The triple valve has 3 positions: CO2 in, beer in or closed position..

Suitable for filling sparkling wines, soft drinks, beer, etc. (glass bottles). Made of stainless steel AISI 304. Filling capacity is 100 (0.65l pdl)...200 (0.35l) pdl/h. Suitable bottles from 180ml to 1l. The bottling level can be adjusted using plastic spacers 10/20/30mm. Bottles max. diameter 12cm and height 33cm. Bottle filling capacity depends on: beverage quality and pressure, bottle size, ambient temperature, beverage temperature, carbon dioxide pressure, and user experience. Working pressure up to 5bar..Machine filling productivity is just informative - quantity of CO 2 gr./Lt - temperature -

The bottling machine is ideal for smaller (craft) beer, soft drink, cider, wine and water producers. Available in 4, 6 and 8 head versions. The machines are suitable for filling both glass and PET bottles from 200 ml to 2 liters. The device automatically bottles a pre-calibrated amount into the bottle using the bottling nozzle. Extras: Carbonizers, cappers, coolers, labeling machine and various bottle rinsing, pasteurizing and washing machines..