30 L Soldered Alembic + thermometer

High-quality copper and handcrafted distiller from a Portuguese manufacturer. Container 10l, dimensions 55x54x27cm, copper thickness 1.1mm, weight 4.5kg Ps. Dimensions and weight may differ from those indicated above, as it is a handmade product.

High-quality copper and handcrafted distiller from a Portuguese manufacturer. Container 20l, dimensions 65x51x31cm, copper thickness 1.2mm, weight 6.5kg Ps. Dimensions and weight may differ from those indicated above, as it is a handmade product..

High-quality copper and handmade distiller from a Portuguese manufacturer. Tank 100l, dimensions 125x135x60cm, copper thickness 1.4mm, weight 35kg Ps. Dimensions and weight may differ from those indicated above, as it is a handmade product..

High-quality copper and handcrafted distiller from a Portuguese manufacturer. Tank 150l, dimensions 140x180x86cm, copper thickness 1.4mm, weight 50kg Ps. Dimensions and weight may differ from those indicated above, as it is a handmade product..

High-quality copper and handmade distiller from a Portuguese manufacturer. Tank 200l, dimensions 155x176x91cm, copper thickness 1.4mm, weight 55kg Ps. Dimensions and weight may differ from those indicated above, as it is a handmade product..

High-quality copper and handcrafted distiller from a Portuguese manufacturer. Tank 300l, dimensions 185x195x110cm, copper thickness 1.6mm, weight 70kg Ps. Dimensions and weight may differ from those indicated above, as it is a handmade product..

High-quality copper and handcrafted distiller from a Portuguese manufacturer. Container 30l, copper thickness 1.2mm. Complete with a copper bottom grate and funnel, thermometer. PS Dimensions and weight may differ from those indicated above, as it is a handmade product.

High-quality copper and handcrafted distiller from a Portuguese manufacturer. Tank 60l, dimensions 90x107x52cm, copper thickness 1.3mm, weight 22kg Ps. Dimensions and weight may differ from those indicated above, as it is a handmade product..

High-quality copper and handcrafted still from a Portuguese manufacturer. Tank 40l, dimensions 70cm x 77cm x 40cm, copper thickness 1.3mm, weight 10.5kg Ps. Dimensions and weight may differ from those indicated above, as it is a handmade product..

High-quality copper and handcrafted distiller from a Portuguese manufacturer. Container 5l, dimensions 45x48x23cm, copper thickness 1.1mm, weight 3kg. PS Dimensions and weight may differ from those indicated, as it is a handmade product.

30 L stainless steel still and fermentation pot - two in one. The product is made of high-quality and hygienic stainless steel, which is welded with argon. A large 30L capacity fermenter and advanced cooling equipment ensure excellent product distillation performance. Thanks to its special features and convenience, it is used both in small businesses and in households. The column of the device is equipped with ceramic balls, which ensure the purity of the raw material. External condensation and condensation in the tube can be done simultaneously, ensuring a better cooling effect, while the built-in spiral tube has a larger contact surface with the cooling water. An additional circulation pump is provided to ensure accelerated water flow in the condensate circuit. Flowing water enters through the lower inlet and exits through the upper outlet. You can monitor the temperature in real time with the included thermometer. Gauze bags, a rack and an airlock save a lot of trouble in the fermentation process. And a breathalyzer kit is included. Possibility to use the pot on a ceramic, wood stove, gas, etc. on the heater. Technical information: Fermenter volume: 30 L, Fermenter size: Φ 350 x 350 mm, Condensation pipe size: Φ 5.5 x 11.0 inches / Φ 140 x 280 mm, Input amount: about 7.5 kg of raw material, Steaming time: 1 -2 h (including heating time), Product weight: 6.4 kg. Country of manufacture: China..

High-quality stainless distillation-extractor 65L. Made in Italy. With the device, it is possible to produce various essential and vegetable oils very easily and quickly. Available in sizes 12 - 250L. The bottom of the unit is filled with water up to the grate and plant material is added and heated to boiling on a gas or electric stove. As a result of distillation, water vapor is released together with vegetable oils, which are captured in a glass flask, which in turn is cooled with water (the cooling process must start at approx. +50C). Since oil is lighter than water, oil and water separate from each other in the glass flask. The whole process takes approx. 60-70 min depending on the power of the heater. The devices can use fresh or dried plant material such as lavender, mint, rosemary, thyme, bay leaves, sage, oregano, chamomile, rose, eucalyptus, lemon balm, peppermint, wormwood, basil, verbena grass, cypress, mountain pines, helichrysum, geranium, eucalyptus, juniper, mastic, marjoram, parsley, rue, turpentine, valerian, etc..

High-quality copper and handcrafted distiller from a Portuguese manufacturer. Container 20l, dimensions 65x51x31cm, copper thickness 1.2mm, weight 6.5kg Ps. Dimensions and weight may differ from those indicated above, as it is a handmade product..

Prismatic copper springs with a volume of 0.5 l, ideal for filling distillation columns. Parameters of copper prism springs: wire with a diameter of 0.40 mm, spring diameter 4-5 mm, spring length 4 - 6 mm. The prism springs filling the ratification column are the most efficient, with the best surface-to-volume ratio. The purpose of filling is to maximize the heat exchange surface from the boiler to the evaporator. To obtain a distillate with a power of 93%, 6 to 8 theoretical layers should be used (the height of one layer is about 2 cm). However, it should be remembered that in addition to strength, the purity of the distillate is also important, e.g. properties of yeast and other organic raw materials. The more layers, the purer the final distillate. It is assumed that the column must have at least 40 theoretical layers to obtain a relatively pure distillate. Wash the copper springs before filling the column for the first time. According to Estonian laws, the distiller may not be used for the production of alcohol. Use of the distiller for such production is at your own risk..

High-quality copper and handcrafted distiller from a Portuguese manufacturer. Container 30l, copper thickness 1.2mm. Complete with a copper bottom grate and funnel, thermometer. PS Dimensions and weight may differ from those indicated above, as it is a handmade product.

Essential Oil Extractor Distiller with stainless steel tanks.The essential oil extractor consists of a 75 liter heating tank, equipped with a removable internal filter; a lid with clamp closure, and a cooling tank with a capacity of 25 liters, equipped with tube and coil; the equipment also includes an analogue thermometer and an integrated safety valve. The operation of the essential oil extractor is simple:fill the tank with water up to the edge of the filter and insert the plants, compacting them to avoid spaces for steam outlet. Fill the cooling tank with cold water. Close the clamp cover and insert the pipe for the cooling circuit. Heat the water in the plant collection tank. Once the temperature of 100° C is reached, the steam begins to capture the essence contained in the plant; crossing the serpentine circuit it cools and physically separates from the essential oil. In the last phase, the essential oil extractor releases the finished product directly from the cooling tank pipette. After about an hour from the start of the extraction, check the quantity of essential oil coming out and, in case of absence, stop water heating.Heating tank features:Material: 18/10 AISI 304 stainless steel. Capacity: 75 L. Internal diameter: 400 mm. Height: 750 mm. Conical clamp closed lid. Analog thermometer. Safety guard. Bottom: flat, rounded and welded. Wall and bottom thickness: 1.2 mm. External tank finish: flower-patterned. Internal tank finish: Mirror polished. External tank welding finish: Satin.Cooling tank features:Material: 18/10 AISI 304 stainless steel. Capacity: 25 L. Internal diameter: 302 mm. Height: 365 mm. Wall thickness: 1 mm. Bottom thickness: 1.5 mm. Cooling coil. Handled. Water overflow pipettes. Mirror polished internal finishes. Flower-patterned external finish.Dimensions: 1160x450x870h mm.